TAR residue is a by product material from producing of Bisphenol A ,
Tar Residue
Tar residue is a by-product material from producing of Bisphenol-A ,
with following details:
1. Physical appearance: shiny black solid pieces on solidification.
2. Nature: highly brittle and softens at about 110 deg centigrade.
3. Average Density: 1200 kg/m3 (molten state)
4. Average molecular weight: 261
5. Composition: contains mainly heavy molecular weight products, Bisphenol-A content being about 1 wt% average. The detail average composition is as follows:
• Phenol : 2.9922 wt%
• PRF : 0.0356 wt%
• TMC : 0.6244 wt%
• TMI : 3.1845 wt%
• M210 : 0.1111 wt%
• M198 : 0.2278 wt%
• o,p-BPA : 1.4102 wt%
• codimer : 42.1097 wt%
• p,p-BPA : 1.4102 wt%
• Cyclodimer : 29.7875 wt%
• Rest being : Unknown Compounds
From
Ancient Mariners N Cowboys Corporation
( A Management Corporation)
We are dealing in
1.All kind of raw materials
2.All kind of heavy metals
3.All kind of construction materials
4.All kind of scraps and metals
5.All kind of automotive
6.All kind of oil n gas
7.All kind of marine industry equipments spare parts and pipeline projects
8.All kind of real estate
WALL GUARD PUTTY is a white cement based product with redispersible polymer and functional additives for application on interior and exterior rough plasters to give a smooth finish.
FEATURES :-
WALL GUARD
PUTTY
1. Provides smooth and uniform finish to rough plasters
2. Good Workability
3. Does not require curing with water
4. Good water resistance
5. Good Tensile Adhesion Strength, Compressive Strength and Flexural Strength
6. Controlled water vapour permeability
7. Excellent abrasion resistance
8. Resists growth of algae and fungi on wall
9. Good intercoat adhesion to emulsion paints
RECOMMENDED APPLICATION :-
It can be used on all types of exterior cement plasters/interior walls, asbestos sheets, concrete etc
PRODUCT TECHNICAL DATA :-
COLOURS : White
FINISH : Smooth and Matt
COVERAGE : 2 coats: 10-15sq.ft/KG up to 1.5 mm thickness in two coat
(It may vary from the quoted coverage to factor such as method and condition of application and surface roughness)
DRYING TIME : 6-8 HOURS
GLOSS LEVELS/SHEEN LEVELS : Silky smooth sheen
FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable
SUITABILITY OF THINNER PAINT Use within 24 hrs.
SHELF LIFE 3 years from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.
PERFORMANCE DATA :-
ABRASION RESISTANCE : Excellent
WATER RESISTANCE : Excellent
SHELF LIFE : 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
REMARKS : a) Kindly refer to the MSDS for the Saffro Mellow Coatings And Resinswhich gives detailed information on Safety measures while handling the paint.
b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire.
c) Avoid eye and skin contact. In case of eye and skin contacts, wash with plenty of clean water.
d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention.
e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint.
f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system.
g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application.
h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use.
i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
SUMO ACRYLIC WALL PUTTY It is one of the best products of itâ??s kind available in the market, provides a very strong, durable foundation and brings out the best performance from the finish paints, both in looks and in durability.
FEATURES :-
SUMO Acrylic Wall Putty is a water based, ready-to-use putty meant for filling and smoothenening out cracks and dents on the plastered wall or similar interior surfaces.
a) The putty has special acrylic binders that ensure that it retains a strong grip on the wall surface, thereby increasing the life of thw paint film.
b) It is made using special equipment and technology that ensure smoothness and consistency
c) On account of the puttyâ??s exceptional whiteness and smoothness, emulsions painted over the putty will tend to look richers
d) It also enhances breathability and lesser porosity compared to conventional putty, thus improving paintperformance further
e) It is quick drying, thus ensuring faster completion of jobs
f) It has better alkali resistance, thus making it more suitable for new walls
RECOMMENDED APPLICATION :-
SUMO Acrylic Wall Putty Can be used for priming plastered walls, asbestos, brick work, concrete, etc
PRODUCT TECHNICAL DATA :-
COLOURS : White
FINISH : Smooth and Matt
COVERAGE : 1 coat: 38-40 sq.ft/KG
2 coats: 24-30 sq.ft/KG
(It may vary from the quoted coverage to factor such as method and condition of application and surface roughness)
DRYING TIME : Surface drying time â?? 20 minutes
GLOSS LEVELS/SHEEN LEVELS : Silky smooth & Matt
FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable
SUITABILITY OF THINNER PAINT Use within 24 hrs.
SHELF LIFE 3 years from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.
Ensure drying time of 1 Week before cleaning.
An expansion joint or movement joint is an assembly designed to hold parts together while safely absorbing temperature-induced expansion and contraction of building materials, and vibration, or to allow movement due to ground settlement or seismic activity
1. Excellent adhesion - prevents falling of tiles
2. Low shrinkage - prevents cracking of tiles and joints
3. Needs no water curing - saves labour and time
PCE is a polycarboxylate based high range water-reducing admixture which enables concrete to be produced with very low water to cement ratios. Polycarboxylate superplasticizer is compatible with air-entraining agents, microsilica, accelerators and many other admixtures; however,each material should be added to the concrete separately.
Thickness 6 mm
Usage/Application Partition
Size 8-4 sq ft
Material Cement, Fibre
Attaching Type Screwed
Fiber cement boards are composite materials made of sand, cement and cellulose fibers. More specifically, they are composed of Portland cement with glass-fiber mesh on the surface. These boards can be used independently or along with plywood.
Upvc square Rain Gutter system
Colors : White,Grey,red & others (based on order)
Size : 6 inch
Thickness: 3mm
Standard length:- 5m ,other custom sizes
Number of pieces in a bundle : 6
Total length in metres/bundle : 30metres(5mx6pc)
Water holding capacity (5m long) : 75litres
Material : UPVC
Accessories : yes..Extra
We, Imperial World Trade Frequently Placed In Ordinary Portland Cement Mortar, Sometimes With A Little Extra Cement Or Some Fireclay Added To Make The Mixture Fireclay Mortar.
A Refractory Composition Comprising Of Heat Resistant Binding System And Low Grain Size Refractory Furnaces. Mostly Used For Joining Bricks. Two Types Of Settings: Air And Heat Setting Mortar The Mortar Hardens At A Heat Above Room Temperature.
The Problem With Using Regular Mortar Is That Portland Cement Can't Take The Heat. Curiously, Cement Retains Its Energy Up To Reasonably High Temperatures But Declines As It Cools Down Through About 600�° F. Ultimately All That Is Left Of The Mortar Is The Sand And Fireclay, With No Cement Binder. The Mortar Has No Strength And Easily Falls Out Of The Joints, Especially If They Are Wide.
Refractory Mortar, On The Opposite Side, Is Performed With High-Temperature Cement And Carefully Selected Aggregates That Don't Expand And Tear The Mortar Apart When Heated. The International Residential Code (IRC) And International Building Code (IBC), Which Were Recently Adopted In Approximately All States And Require That Fireboxes, Smoke Chambers, And Flue Liners Be Laid With Refractory Mortar.
BuildWell Quickbond is a admixture of sand, cement and superior quality polymers. It is a bonding agent
that enables quick preparation of ceiling and RCC wall surface. Also offers the dual benefits of mechanical
and chemical bonding, which eliminates the labor – intensive hacking and reduces debonding losses.
Features :
- Excellent bonding.
- No hacking is required on RCC wall.
- Hence prevention of microcracking and
saving of labor cost.
- Strong chemical and mechanical bond
- Easy to use.
- Works good for Gypsum plaster as well
for cement sand plaster
Benefits :
- Can be easily applied by brush.
- Reduces hacking.
- Time saving.
- Less rebound loss while plastering.
- It is water soluble product hence no
solvent odour.
- Fast drying.
- Improves bonding strength between
RCC wall and Plaster.
Step N Riser ( staircase) is most important elements of any structure.
The use of steps is very high and hence ceramic material can't be used.
Where granite and marble have the natural advantage that as much as its getting in used, the shining will not get dull but increasing.
For the projects, we are providing the ready to use steps and riser.
It will be available in customize sizing as per requirements.
The molding and anti slipper lines also getting done.
So just ready to use Step n Riser. ( Staircase). Its will be be done with all granite and marbles.
57118 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
