Microtex lead acid Diesel Loco Starter batteries are manufactured by our associated company. The unit has a well established modern battery manufacturing facility with a fully equipped chemical and electrical laboratory.The cells assembled in either Molded Monoblock Hard Rubber containers or Plastic Containers housed in a Sturdy and Rugged FRP Tray are connected with welded joints made of lead alloy with an anti-corrosive coating. The Microporous Vent Plugs fitted to the cells prevent the loss of electrolyte.
Constructional Features:
Each cell assembled in either Monoblock Hard Rubber container or Rugged FRP Tray, containing Microtex high performance tubular positive plates in premium Energy Bags Acrylic Tubular gauntlets, pasted negative plates manufactured under exacting control to withstand rough handling and electrically separated by high quality PE Separators
The tubular positive plates have specially designed spines casts from corrosion resistant lead antimony-selenium alloy ensconced in tabular bag which is vibro-filled with active material and pickled, thus ensuring high-rate discharge, more capacity for a given volume, greater shock resistance and long life with excellent reserve capacity
The pasted negative plates, made up from a blend of oxide, special additives and expander, aid in cell longevity
The high quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance
Short-circuit between plates due to sediments is avoided by the use of sediment spacer at the bottom of the container on which the plates rest
The Micro porous vent plugs prevent loss of escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell
Microtex lead acid Diesel Locomotive Batteries are low maintenance batteries
Special Features:
The low antimony content in the grid alloy ensures low gassing
Water loss and maintenance is minimum
Corrosion is negligible
Very low self-discharge and internal resistance
Excellent reserve capacity
Delivers consistent reliable power
Suitable for all weather conditions
Long life cycle
Diesel locomotive engines use heavy duty industrial diesel locomotive starter batteries for starting and operation of a variety of on-board equipment. The modern diesel locomotive in India is a self contained version of the electric locomotive. Like the electric locomotive in Indian Railways, it has electric drive, in the form of traction motors driving the axles and controlled with electronics. For over three decades, Microtex has been a technological leader in the development of high performance Industrial lead acid batteries, especially for Indian Railways. Microtex continues its commitment to research and develop for improving batteries as per customer need of railway diesel locomotive starting batteries with RDSO approved specifications.
MIicrotex DG Starter Heavy Duty Batteries with new technology for Genset applications. The Heavy Power Batteries come with exclusive features to meet the demanding conditions for Genset applications in the Indian environment. These batteries are manufactured using state of the art techniques and quality components, materials for reduced maintenance and extended battery life.
We are leading manufacturers & suppliers of best quality Golf Cart Batteries.
Microtex Golf cart batteries - Special Features:
Special Antimonial alloys for good cycle life and low maintenance
Tubular spine grids casted at 100 bars High Pressure die casting on German technology machines, for high compacted & corrosion resistant grids.
Proprietary chemical mixes for added service life.
Heavy duty custom made separators.
Heat sealed to eliminate container leakage.
Available in wide range of 6v, 8v & 12 volts
The PVC battery separator was developed for the first time in India under the brand name Microtex with their own know how and with indigenously designed machinery 41 years ago. The plant and machinery comprise sintering machines and other electrical installations, with own captive power generators, for the smooth and automatic production of over a hundred million separators per annual, the largest and most renowned manufacturers of PVC separators in India.
PVC battery separators are micro porous diaphragms placed between the negative and positive plates of lead acid batteries to prevent any contact between them to avoid internal short circuit but at the same time allow free circulation of the electrolyte. Microtex PVC separator are uniform in quality, free from holes, broken corners, splits, embedded foreign material, surface rupture, physical defects, etc
Characteristics:
Microtex PVC separators have a very low electrical resistance which reduces internal loss saving on electric energy and improving battery performance. Their high porosity ensures easy diffusion of electrolyte and movement of ions guaranteeing battery performance even at high discharge rates. Being completely non reactive to acids, active metals and emitted gases, Microtex PVC separators enhance the active life of the battery.
PVC separators surpass IS specifications IS 6071:1986 and have been tested and certified by the Central Electro Chemical Research Institute, CSIR, Chennai to be within IS specifications
Microtex PVC separators are manufactured in both standard and custom sizes for automotive and industrial battery application. Every separator produced is visually inspected before being packed. Physical and chemical testing is done batch wise at CECRI CSIR, Chennai. Routine checks made at key stages along the manufacturing process maintain Microtex separators' constant high quality
Microtex separators, combining the outstanding characteristics of low electric resistance, chemical cleanliness, higher porosity, Low pore size, superior corrosive resistance and with a minimum level of oxidizable organics, make themselves extremely usable for automobile, traction, stationary, train lighting and all other lead acid batteries.
Microtex separators have proven themselves over 41 years of use. Four decades of experience and modern production methods and facilities have made Microtex the leading battery separator supplier in India. The key to their leading position in the separator industry is technological innovation, quality, and service.
Product Range:-
Height (mm)
Width (mm)
Thickness (mm)
136
148
1.65
136
148
1.1
140
147
1.6
84
76
1.65
145
115
1.4
300
148
1.65
270
148
1.65
573 Automotive Batteries Suppliers
Short on time? Let Automotive Batteries sellers contact you.
Microtex traction cell is assembled in a high-grade plastic container containing high performance tubular positive plates in premium energy bags. Microtex traction cells deliver consistent reliable power. Our product is suitable for all weather condition. Water loss and maintenance is minimum. Microtex traction batteries are used in electrically powered vehicles like the forklift, Pallet Truck, Scissor Lift and any other industrial traction applications. Microtex lead acid traction batteries are manufactured in India by Microtex Energy P Ltd. for more than two decades. The unit has a well established modern battery manufacturing facility with a fully equipped chemical and electrical laboratory at Peenya, Bangalore. Microtex traction batteries are used in electrically powered vehicles like a forklift, tow truck, power trolley, lifting platforms and other industrial traction applications. These traction batteries are made to BS & DIN specification.
Constructional Features:
Each traction cell is assembled in a high grade plastic container
The container containing high performance tubular positive and pasted negative plates. The positive and negative plates are separated by high-quality PE Separators
The tubular positive plates have specially designed spines, cast from corrosion resistant lead-antimony-selenium alloy ensconced in the tubular bag which is Vibro-filled
The pasted negative plates made up from a blend of oxide, special additives and expanded, aid in cell longevity
The high-quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance
The high-grade plastic containers are non-reactive to acid, temperature and the gases emitted by the cell
Short-circuit between plates due to sediments is avoided by the use of a prismatic sediment spacer placed at the bottom of the plastic container on which the plates rest
The splash-proof vent plugs prevent the escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell
Microtex electric multiple unit or emu battery is made up of 5 cells of 2 volts each. The cells assembled in molded monoblock hard rubber containers are connected with welded joints made of lead alloy with an anti-corrosive coating. Water loss and maintenance is minimum delivers consistent reliable power. Microtex lead acid EMU batteries are manufactured by Mysore Thermo Electric Private Limited.
Microtex EMU Battery is made up of 5 cells of 2 Volts each. The cells assembled in Molded Monoblock Hard Rubber containers are connected with welded joints made of lead alloy with an anti-corrosive coating. The Microporous Vent Plugs fitted to the cells prevent the spilling of the electrolyte.
Constructional Features:
Each cell assembled in Monoblock Hard Rubber container containing Microtex hi-performance tubular positive plates in premium Energy Bags Acrylic Gauntlets bags, pasted negative plates manufactured under exacting control to withstand rough handling and electrically separated by high quality PE Separators
The tubular positive plates have specially designed spines casts from corrosion resistant lead antimony-selenium alloy ensconced in tabular bag which is vibro-filled with active material and pickled, thus ensuring high-rate discharge, more capacity for a given volume, greater shock resistance and long life with excellent reserve capacity
The pasted negative plates, made up from a blend of oxide, special additives and expander, aid in cell longevity
The high quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance.
Short-circuit between plates due to sediments is avoided by the use of sediment spacer at the bottom of the container on which the plates rest.
The Microporous vent plugs prevent escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell
Special Features:
The low antimony content in the grid alloy ensures low gassing
Water loss and maintenance is minimum
Corrosion is negligible
Very low self-discharge and internal resistance
Excellent reserve capacity
Delivers consistent reliable power
Suitable for all weather conditions
Long life cycle
✔ Output Power: 0.85 KVA
✔ Voltage: 12 V
✔ Technology: Higher end Micro-Controller based design
✔ WaveForm: Pure Sine Wave
✔ Recharge Time: 4 Hr(s)
✔ Warranty: 2 Year(s)
✔ Features: Battery deep discharge protection, Fuzzy Logic Control a unique and advanced technology that protects the Battery, Higher end Micro Controller based design, Reduces Frequency of water Topping And Enhances Battery Life, Surface Mount Technology for PCB Cards, User Friendly Graphical Display with audible alerts
This DC-DC Converter is designed to provide 110V to 24V power conversion for heavy duty applications. High efficiency, high precision DC to DC Converter unit. Wide input voltage range, with over-current and over-voltage protection function.
Model No: DLS-11024DC
Input Voltage: 110V DC
Output Voltage: 24V DC
Output Current (A): 1, 3, 5, 8, 10, 12 A
This battery charger is designed charge 12V battery from 48V DC Power Supply. High efficiency, Battery Charging unit. Wide input voltage range, with over-current and over-voltage protection function.
Model No: DLS-4812BC
Input Voltage: 48V DC
Output Voltage: 13.8V DC
Output Current (A): 1, 3, 5, 8, 10, 12 A
This voltage converter is designed to provide 48V to 24V power conversion for heavy duty applications. High efficiency, high precision DC to DC Voltage Converter unit (SMPS). Wide input voltage range, with over-current and over/under voltage protection function.
Model No: DLS-4824DC
Input Voltage: 38-62V DC
Output Voltage: 24V DC
Output Current (A): 1, 3, 5, 8, 10 A
This buck DC Converter is designed to provide 110V to 12V power conversion for heavy duty applications. High efficiency, high precision DC to DC Converter unit. Wide input voltage range, with over-current and over/under voltage protection function.
Model No: DLS-11012DC
Input Voltage: 100-130V DC
Output Voltage: 12V DC
Output Current (A): 1,3, 5, 8, 10, 12 A
