Treadmill,elliptical,exercise bike,spinning bike,benches,racks,cable motion,fitness equipment accessories.
HUAXUAN HIGH TECHNOLOGY�® KH-204 Is a new version high-performance polycarboxylic superplasticizer. Compared with other high efficiency water-reducing agents,it has the properties of ultra-high water reduction,low shrinkage,low bleeding rate and small avalanche loss. Ultra-high water reducing rate:up to 40%,particularly significant in high-grade concrete (above C50).In the same condition,it costs less material to get the same effect. Excellent plastic retention: Excellent plastic retention performance: Because the steric hindrance of the extended polymer side chain effectively hinders the secondary agglomeration between cement particles, the product has high dispersion and can maintain this performance for a long time. Good early strength and strengthening effect: under the same conditions, the concrete mixed with this product has a higher early strength and strengthening effect than other types of superplasticizers. Significantly improve the durability of concrete: The product has a low alkali content, and because itâ??s an air-entraining type high efficiency water reducing agent, it significantly reduces the alkali-aggregate reaction of concrete and improves the freeze-thaw resistance of concrete. Stability: The concrete shrinkage and creep properties will be effectively improved after adding the product,in the meanwhile, it gains a good stability, so there are lower risks of cracks.
Gantry Crane Rail Changer This equipment is suitable for the old and new switching operation of rail, switch rail and frog point rail. There are running wheels in the center of both sides, which can be carried out during transportation. It has the characteristics of adjustable height, lateral adjustment, locking, light weight, convenient handling and wide application range. The equipment can be equipped with section rail transport trolley, rail transport, switch rail and frog point rail operation trolley. The wheels are nylon wheels with good insulation performance and equipped with brake device. It is safe and reliable with light weight and high operation efficiency. It is an ideal special tool for rail transport in construction operation of Railway Public Works Department. Details Images
Hydraulic Railway Track Jack It is new type equipment that is used on the railway line's maintenance and repairing. The most important feature of this machine is that is a dual-purposed machine what meet the needs of the lifting work of the line, as well satisfy lining operations. Hydraulic Track Lifting and Lining Tool is mainly composed of: power part, operating mechanism, body, running gear, landing gear, hook rail device, starting device, dialing device, lower guiding device, lower track, etc. Hydraulic Track Lifting and Lining Tool is specially used for the railway track maintenance. It is used for the track lifting and lining. It has features with simple and compact structure, simple and flexible operation, easy maintenance,fast and reliable performance when go up and down the track
Internal Combustion Rail Rust Remover Internal combustion rail rust removal machine is suitable for rust removal on the surface of various types of rails, and grinding wheels can be installed to achieve rail to grinding operatipons, quality meets the requirements of railway industry standards, and is the line overhaul and maintenance of railway public works departments. and ideal tools for emergency repair operations. This machine has the characteristics of reasonable design, compact structure, easy operation, flexible upper and lower roads, easy to move, wide range of application, and one machine for multiple purposes.
Internal combustion rail end grinding machine The internal combustion rail end grinding machine is suitable for grinding the rail end, and it is also a supporting product of small mobile pneumatic welding equipment. It is convenient to install the card, easy to operate, high grinding efficiency, and can ensure the quality requirements of the rail end face.
Hydraulic rail leveler Hydraulic rail levelers are suitable for vertical straightening at the joints of various types of rails on railway lines to make the joints of two rails straight. This machine has the characteristics of simple structure, convenient operation and reliable quality. It is suitable for maintenance, overhaul and emergency repair operations in the public works department.
rail steel fork In the process of transporting and crushing mineral resources, steel forks are needed. In the process of railway line construction and maintenance, steel forks are used to shovel stones. There is no tool that can replace steel forks. If steel forks are used improperly, they will often cause damage to the tools, such as broken teeth or broken handles. During use, you should try to put the steel fork against the ground and insert it into the object to be removed. One is to reduce resistance, and the other is to prevent the steel fork from being overly worn. The handle can be replaced if the handle is broken. If the tooth of the steel fork is broken, then The steel fork is scrapped! The product is made of X-quality rail steel as the raw material, forged as a whole, and quenched, with stable quality! It is widely used in railway maintenance and construction projects, and all railway public works departments and related distributors are welcome to purchase.
Hydraulic Rail Stopper Rail Stopper is a safety equipment which is installed on the end of rail track to prevent Vehicle slipped.It possesses the features such as reasonable structure,big braking force.The support arm and braking rails connected by the plug-in joint method.It's originated in china,easy to operations,and convenient to repair and reset.
Hydraulic rail bending machine rail bender Hydraulic rail bending machine also called hydraulic bend machine, is rail installation maintenance when a special tool to bend the rail operations.Hydraulic bend machine is a dedicated to laying railway line in tunnel mining slope level elevation changes at the scene of the track-laying for below 50 kg/m or light rail vertical bending or adjustment. Hydraulic rail bending machine designed by the principle of hydraulic transmission and leverage, using static pressure on curved track rail horizontal and vertical curve or straight rail operations.
Petrol Engine Rail Drilling Machine This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, a screw nut clamping mechanism with quick opening function, fast clamping, accurate positioning, fast drilling, simple operation and safety use.
Switch Grinding And Deburring Machine NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
Rail wave grinding machine The GBM-7.6 rail wave abrasion grinding machine is a professional machine used for the wave abrasion and grinding of the rail top. This machine is suitable for various rails of 43~75kg/m.
Lithium battery Rail profile grinding machine The whole rail profile grinding machine has passed the strict verification of protection grade, and supports the work in rainy and snowy weather; Professional lithium battery platform for ultra long endurance operation; The equipment can be used normally under extreme conditions such as high cold and high altitude; The lithium battery has passed the safety test conducted by the national authority; Adjustable limit clamp, suitable for various rail shapes and internal and external grinding; The sealed high-power DC brushless motor is adopted, and the lightweight design of highly efficient grinding welding joints makes the handling and transition more convenient.
NGM-6.0 Rail Profile Grinder This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
NQG-5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc.
NQG-5III Rail Cutting Machine NQG-5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m 75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
YCD-2 hydraulic Turnout Tamping Machine YCD-2 hydraulic turnout tamping machine is a special maintenance mechanical equipment for railway turnouts. it is mainly used for tamping the sleeper ballast in the turnout section, and can also take into account the tamping effect of the main track bed ballast. BENEFITS This machine uses Honda gasoline engine GX390 as power, light weight, easy to start, at low the low noise and low plution. which great improves the working environment of workers and reduces labor intensity
Hydraulic rail bending machine This hydraulic rail bending machine is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable for all types Rails. The machine has simple structure, convenient operation, safe operation and easy maintenance. It is an effective tool for rectifying rail joint problems
