Rail Straightness Machine

Digital Rail Straight Edge Digital Rail Straight Edge is used for measuring vertical railway line rail abrasion and flank wear, it includes reference positioning frame and installed on the framework of reference positioning auxiliary positioning screw and the depth of the rail vertical abrasion, side abrasion measured in feet, its structure is simple, intuitive and accurate measurement data, and upper and lower rapidly, operator safety, its light weight, convenient to carry. Benefits Digital Rail Straight Measuring Ruler has the advantages of high measuring accuracy,easy to operate,LCD digital display etc. Specification Model LJ-ZD-I Type Digital Straight Edge Material Carbon Steel Dimensions (L x W x H) (mm) 120*12*24 cm Measurement range �±5 Indication error ±0.06 Measuring length 1000

Rail Straight Edge Gauge This item is used to check track rail from any deflections before and after welding. 1.The ruler body is made of high-quality carbon steel or stainless steel, and the scoring adopts laser scoring technology. 2.The cutting line is made of laser cutting process 3.The Straightness Measurer railway ruler is used to measure the railway rail flatness and wear. 4.Material: carbon steel

Rail Straight Edge Ruler Rail Straight Edge Ruler is used to check track rail from any deflections before and after welding. Benefits 1. The ruler body is made of high-quality carbon steel or stainless steel, and the scoring adopts laser scoring technology. 2. The cutting line is made of laser cutting process 3. The Straightness Measurer railway ruler is used to measure the railway rail flatness and wear. 4. Material: carbon steel Model LJ-PC-1000 Type Rail Straight Edge Material Carbon steel Dimensions (L x W x H) (mm) 1000*20*50mm Measuring range 0-1000mm Measuring surface accuracy â?¤0.04 Weight 2.6kg

Rail Straight Edge Ruler Rail Straight Edge Ruler is used to check track rail from any deflections before and after welding. Benefits 1. The ruler body is made of high-quality carbon steel or stainless steel, and the scoring adopts laser scoring technology. 2. The cutting line is made of laser cutting process 3. The Straightness Measurer railway ruler is used to measure the railway rail flatness and wear. 4. Material: carbon steel Specification Model LJ-PC-1000 Type Rail Straight Edge Material Carbon steel Dimensions (L x W x H) (mm) 1000*20*50mm Measuring range 0-1000mm Measuring surface accuracy 0.04 Weight 2.6kg

YD-22 hydraulic tamping machine is a kind of professional machinery used for railway line ballast tamping maintenance except for turnouts. It can be operated with train inervail time, without closing sections. It is equipped with three power modes. They are petrol, diesel and electric Engine types: Honda GX390 petrol engine or SF 190 diesel engine or electic engine. It is siutable for the tamping operation in the new constuction of ordinary railway lines and the large-scaie or medium-scale railway line maintenance It can complete the tamping operation of various types of concret seepers and wooden sleepers Equipped with automatic rail clamping device Equppped wih the f-tack walking frame, the machine can be removed off at any place and any time

Rail adjusting machine 6.1 rail stress relieving equipment This machine is the special device to exert rail vibration on seamless rail to relieve the rail stress. It is pushed forward by a single operator. Product features It is equipped with two pairs of knocking hammers, which knock the inside and outside of two steel heads with same force. It can knock each rail for 48 times per minute. It also contains a startup engine which drives the knocking hammer control rod via a v-belt drive reducer. The knocking hammer is equipped with plastic pads to prevent the formation of knocking marks on the rail or damage on rail. The entire system is mounted on a ultra-light cast with 4 cast irons and insulation wheels. The knocking is start by the hand clutch mounted near the engine. The complete machine can be on-track through 4 lifting eyes by the crane and also by four persons. The knocking hammer is covered with a metal mesh to protect the operator and worker safety. In case of emergency, it can activate the emergency switch to shut down the machine.

Rail cutting machine 4.1 Yhd-c1 gasoline rail cutter Name: yhd-c1 gasoline rail cutter Id: c027 For cutting rails of highest strength. Product features Cutting time on average 75-90 secs. High precision cutting with horizontal and vertical deviation less than 1%. Automatically adjustable cutter shield according to the movement of cutting wheel ensures highest safety requirement. Unparalleled ergonomic design reduces vibration and noise levels. Technical specifications ItemsUnitSpecifications 1Engine Husqvarna k1260 2Idle speedRpm2700 3PowerKw5.8 4Cutting disc diameterMmF=350?f=400 5Max cutting depthMm125?145 6Noise levelDb85 7WeightKg20 8DiameterMm550*500*850

Rail grinding machine 1.1 Yhd-g1 rail profile grinding machine Name:yhd-g1 rail profile grinding machine Id:c001 This machine is designed to grind the rail head and remove the weld beads at welding joints, ensures perfect grinding of rail head. Product features Precise setting of grinding angle through an outrigger. The grinding of rail top and sides can be completed in one continuous grinding operation. Equipped with two support rollers and two guide wheels to ensure a smooth operation on the rail. Ergonomic design allows grinding work easy and fast. Technical specifications Itemsunitspecifications 1enginehonda gx270 2power/speedkw/rpm5.1/3600 3fuel consumption rateg/kw h=374 4grindstone sizemmf=150, d=72 6adjustable grinding angle-90~+90 7dimensionmm1120*760 *800 8weightkg79 Bopp Pearlized Film

Rail tamping machine 5.1 Yhd-d40 light tamper Name: yhd-d40 light tamper Id: c050 Light tamper applicable to railway maintenance of ballast track bed. The tamper is easy and fast to insert and pull out from the ballast, especially applicable to turnout tamping operation. Product features Light in weight (17kg) and long servicing life with low maintenance. Perfectly protect the ballast compared to other conventional tamper. Ergonomic design enable low vibration and comfortable operation of operator. Anti-loose connecting device facilitates the maintenance on site without special tools. Technical specifications ItemsUnitSpecifications 1Engine Komatsu type g4l 2PowerKw1.5 3Rated vibration accelerationM/s²1400 4Maximum non-loaded amplitudeMm>5 5Vibration frequencyHz130 6WeightKg17 7Dimensions Mm1060 x 400 x 280 The product has obtained 1 national invention patent and 3 utility model national patents. The product has passed the technical identification of the shanghai railway administration and the crcc certification.