Huipu fiberglass plain weaving fabric mainly means fabrics woven by fiberglass yarn in plain weaving. Such fabrics are mainly used in vessel, building, electric insulation (designated as e-grade cloth) and the production of various composite material and feinforced material.
E-grade fabric includes various kinds of electrical grade fabric, whose surface has benn processed with chemical methods. Huipu e-grade fabric is used as the base material of copper clad laminates, which are applied in various kinds of automatic precision equipments, such as wraping-sizer, air jet loom, finish machine etc.
Fiberglass yarn is made from 4-9um fiberglass filameters which are the gathered and twisted into one finished yarn. It is widely used in productions of fabric as finished well as electrical wrapping materials, engineering materials, textured yarn, woven electronic grade fabric and so on.
Each bead individually hand made in the flame. Glass used is from italian origin.Beads are strung on a special elastic. The size is 7.5 inches(to suit most ladies wrists) colors blended mixtures of beads to suit fashion and others. Orders for specific colors accepted.
Bracelets individually packet in bubble wrap and placed in a card box box. Suitable for export.
Bdi-50 Hot air universal oven (memmert type)
(Three side heating elements)
Standard double wall fabrication, Inner chamber made of richly anodized aluminium or highly polished stainless steel sheet. Exterior fabricated out of thick milled steel sheet duly finished in white stoving enamel/powder coated paint with mat finished colour combinations.
Kanthal wire heating elements provided on three sides to attain quick and uniform heating in range of 50° C to 250° C ± 2° C, controlled by capillary type thermostat. L-shaped thermometer is built-in type. Control panel is provided with selector switch of high or low rates of power thermostat control Knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase.
Chamber size in mm / Inches No. of Capacity
H W D (Approx.) Shelves (Approx.)
a) 300 x 300 x 300 (12” x 12” x 12”) 2 28 ltrs.
b) 350 x 350 x 350 (14” x 14” x 14”) 245 ltrs.
c) 450 x 450 x 450 (18” x 18” x 18”) 295 ltrs.
d) 600 x 450 x 450 (24” x 18” x 18”) 2 125 ltrs.
e) 600 x 600 x 600 (24” x 24” x 24”) 2224 ltrs.
f) 900 x 600 x 450 (36” x 24” x 18”) 2252 ltrs.
g) 900 x 600 x 600 (36” x 24” x 24”) 2336 ltrs.
h) 900 x 900 x 900 (36” x 36” x 36”) 3480 ltrs.
Optional:
i) Air circulating fan.
ii) Timer 0-24 hours
iii) Imported Thermostat “EGO” / “JUMO” German with the Accuracy of ± 1°C.
iv) Digital temp. Indicator-cum-Controller.
v) Microprocessor PID digital temp. Indicator-cum-controller.
Main features:
1). Qualified and ideal laboratory centrifuge;
2). Adopts advanced microprocessor system for accurately controlling speed, time, temperature and RCF value;
3). Driven by free-maintenance frequency conversion motor for high speed accuracy;
4). CFC free refrigerated system with double circuits of heating/cooling for high temp. accuracy;
5). Digital display;
6). 30 programs can be edited and stored;
7). 10 grades of acc/dec speed for option;
8). Automatic identification system of rotor for avoiding over-speed;
9). Protections of over-speed, over-temperature, imbalance and automatic diagnosis system.
Description:
ESW-750 Lab Horizontal Bead Mill is a kind of wet-grinding machine suitable for continuous or cyclical process. The machine applies to materials with various viscosity and can get ideal particle size in shorter time, more efficiently. It is easy to start with low energy consumption rate and high grinding effect.
Features:
1. Adopt German Burgamnn Mechanical seal with compact structure and liquid recycle pump which can ensure the seal can work normally for a long time
2. Adopt dynamic trapezoid fence booms discharge to solve conventional problem of slowly discharge, stuck grinding medium etc.
3. The inner tank uses special compound stainless steel which is completely penetrated after the heat treatment so that ensure the hardness is equal to the hardness before be thoroughly grinded. Therefore, the ddurability can be ensured and metal pollution can be avoided
4. Adopt spiral cooling system, taking most of the heat of the grinding tank.
5. Finely dispering and grinding materials with different viscosity from micro to nanometer
6. Suitable for continuous or cyclical process.
Technical Parameters
Model: ESW -750 Lab Horizontal Mill
Voltage: 380v/50Hz 3PH ( can be customized)
Motor: 750W
Mechanical SealingL Germany Burgmann mechanical seal, it can bear pressure higher than 10kgs
Material of Chamber: High chrome steel after heat treatment, its hardness can reach HRC62-68
Grinding Material: Special high wear-resistant alloy steel
Discharging Way: dynamic trapezoid fence booms discharge
Inlet&outlet pipe: Diameter for inlet pipe and outlet pipe is G1/2 separately
Cooling Way: Multiply Bellows
Volume of Grinding Tank: (ml)400ml
Speed(rpm): 0~8000
Flow of Cooling Water: 80L/H.
For general laboratory use for various experiments. Made of polished brass, each mass has a standard keyhole slot to retain on hanger. Each mass and hanger is stamped with its own value
Nickel-plated brass tube with a free moving air regulator and serrated gas inlet nickel-plated brass tube, 9mm O.D. Base made of stamped steel sheet. Base dia 80mm and overall height 140mm approx. Powder coated or stove enamel finish.
NATURAL GAS, 11mm dia tube
L.P.GAS, 11mm dia tube
NATURAL GAS, 13mm dia tube
L.P.GAS, 13mm dia tube
COAL GAS, 13mm dia tube.
Faith-1000 is a random access automatic biochemistry analyzer. It adapts 120pcs cuvette as reaction and test container and has the feature of suitable test speed, not across-pollutions and low consumable, opening reagent. It is used for testing the biochemical index of patient.
Main specifications:
Test speed: 200 tests/hour
Assay types:end-point assay, rate assay, fixed-point assay...
Assay items: 45 items once time
Cuvette: 120 reaction bottles; light path length: 6mm
Total reaction volume: 180ul minimum
Sample volume: 2 to 50 microliters
Reagent volume: r1 25ul-300ul; r2 10ul-150ul
Reaction time: about 10 minutes
Wavelength: 340, 405, 510, 546, 578, 630, 660, 700nm quality control: 6 types per test item
Dimensions analyzer: 958mm*700mm*(500+600)1100mm.
Hemagen Analyst Benchtop Blood Chemistry Analyzer .
This unit was manufacturer refurbished on July 2002 and never used since.
It comes with Manuals, Neutral Rotor, Printer Paper, and Replacement Fuses.
Get profile, panel or single test results in 10 minutes for glucose, BUN, creatinine, BUN/creatinine ratio, uric acid, cholesterol, triglyceride, GOT, total bilirubin, alkaline phosphatase, GPT, GGT, calcium, total protein, and amylase. All reagents are dry and pre-packaged to minimize operator error and to increase productivity. No interference from fibrin clots saves rotors, time and rerun costs. Sample requirement is just 90 ul of plasma or serum allowing you to test even the smallest patients. Interfaces with most Veterinary Practice Management Software programs. This unit is completely reconditioned and recertified.
New and unused. Comes with configuration manager software 1.0, power supply, temperature verification cartridge, 2 system verification cartridges(30 sec. And 300 sec.)
Features:
Performs rapid and accurate tests within minutes
Two level QC lockout
Preprogrammed valid operator IDs and notes
Store up to 400 QC results and 400 patient results
Offers liquid and electronic quality controls
Customizable programming options with Configuration Manager software
Test Menu:
ACT-LR: Low Range Activated Clotting TIme
ACT+: Activated Clotting Time Plus
PT: Prothrombin Time
Citrate PT: Citrate Prothrombin Time
APTT: Activated Partial Thromboplastin Time
Citrate APTT: Citrated Partial Thromboplastin Time.
Specifications :
1- Load Capacity: 0- 1000kgs.
2- Maximum distance between grips: 700mm
3- Speed: Variable speed
4- Microprocessor based load indicator: Accuracy of ± 0.05% of load indicated & Resolution Of 100grams.
5- Extension meter: Least count of 1 mm through Proximity/ Encoder switch.
6- Over load excess elongation protection provided.
7- Newton or Kg. Can be selected.
8- A pair of grips provided to hold the samples up to 6 mm thickness.
9- Floor Standing Model.
10- Paint: Powder Coating.
11- Power: 440V AC, 3Phase, 50 Hz.
Standard.
25803 Glass Ceramics Suppliers
Short on time? Let Glass Ceramics sellers contact you.
