In Vietnam, Longan tree is grown quite commonly along the length of the country from North to South. Logan trunk, crooked, many branches and canopy. The fresh wood of the Longan tree is reddish-brown or yellow-brown. In addition, Longan trees are also exploited to make firewood, charcoal, and handicrafts. The large wooden body will be used to make handicrafts, the medium and small body will be exploited for Longan wood charcoal. Specification of LONGAN charcoal Moisture content: .75% Ash content: 2.72% Volatile matter content: 28.17% Fixed carbon content: 69.11% Calorific value: 7216 kcal/kg Burning time: 3.5 - 4 hours Dimension of LONGAN charcoal Shape: Round stick Diameter: 3-8 cm Length: cut as customer's request (15-20 cm)
White charcoal briquette, also known as Binchotan, is considered one of the most premium charcoal types in the market. Applied with Japanese technology, Binchotan charcoal briquette delivers the best grilling experiences due to its smokeless and odorless feature. It has a distinctive white color with high heat output. What's more, this type of charcoal briquette is very popular in the Korean and Japanese markets. Burning time: 3.5-4 hours Calorific value: 7500 kcal/kg Fixed carbon content: 92.3% Ash content: 2.72% Moisture content: 1.75% Volatile matter content: 5% Max Shape: Solid stick Diameter: 3-8cm Length: 15-20cm
Khaya Charcoal Briquette can deliver a neutral and consistent heat, making it much easier to adjust heat and cook different types of food. Another advantage of this charcoal briquette is that it produces no sparks or flames, providing a safer cooking experience and ensuring food is cooked evenly without unwanted flare-ups. Burning time: 13.5 hours Calorific value: 7349 kcal/kg Fixed carbon content: 68.8% Ash content: 2.1% Moisture content: 3.9% Volatile matter content: 27.0% Shape: Lump Diameter: 3-8cm Length: 5-10cm
Metallurgical Analytical grade calcined Alumina (sandy type) having purity 98.5 minimum
Aluminium, solar panel, aluminium extrusion, aluminium profile, secondary aluminium.
Diesel en 590 10ppm jet fuel a1.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
QUANTITY 25.000 TONS OR MORE Condition of delivery :CIF we can discuss FOB Houston
Dear Buyers, We have EN 590-10 PPM Diesel available in Singapore TANJUNG BRUAS PORT on 27th August 2023. We can share Bill of Lading, IMO number, Entrustment letter. Quantity will be 100,00 MT. Please contact immediately. Regards.
Carbon black, tire pyrolysis oil, sawdust briquette charcoal, coconut shell charcoal, wood vinegar product.
E590 10PPM, Diesel E590 Gost Diesel Fuel Oil D6
Wood Pellet
Diesel
Refined petrochemicals, ulsd10ppm diesel, gasoil.Trade, buying and exporting
We are trading in - Petroleum Coke Petroleum coke, abbreviated coke or petcoke, is a final carbon-rich solid material that derives from oil refining, and is one type of the group of fuels referred to as cokes. Petcoke is the coke that, in particular, derives from a final cracking process a thermo-based chemical engineering process that splits long chain hydrocarbons of petroleum into shorter chains that takes place in units termed coker units. (Other types of coke are derived from coal.) Stated succinctly, coke is the carbonization product of high-boiling hydrocarbon fractions obtained in petroleum processing (heavy residues). Petcoke is also produced in the production of synthetic crude oil (syncrude) from bitumen extracted from Canada's oil sands and from Venezuela's Orinoco oil sands. In petroleum coker units, residual oils from other distillation processes used in petroleum refining are treated at a high temperature and pressure leaving the petcoke after driving off gases and volatiles, and separating off remaining light and heavy oils. These processes are termed coking processes, and most typically employ chemical engineering plant operations for the specific process of delayed coking. This coke can either be fuel grade (high in sulfur and metals) or anode grade (low in sulfur and metals). The raw coke directly out of the coker is often referred to as green coke. In this context, green means unprocessed. The further processing of green coke by calcining in a rotary kiln removes residual volatile hydrocarbons from the coke. The calcined petroleum coke can be further processed in an anode baking oven to produce anode coke of the desired shape and physical properties. The anodes are mainly used in the aluminium and steel industry. Petcoke is over 80% carbon and emits 5% to 10% more carbon dioxide (CO2) than coal on a per-unit-of-energy basis when it is burned. As petcoke has a higher energy content, petcoke emits between 30 and 80 percent more CO2 than coal per unit of weight. The difference between coal and coke in CO2 production per unit of energy produced depends upon the moisture in the coal, which increases the CO2 per unit of energy heat of combustion and on the volatile hydrocarbons in coal and coke, which decrease the CO2 per unit of energy.
Product: Green Petcoke Product Origin: seller to advise. Must be of non- sanctioned origin Minimum order Quantity: 10,000 MT Sulfur content: 3% max Volatility: between 3% and 10% max Size: 30mm max Payment Terms: 100% LC at Sight.
Pet coke is available for immediate sale. We can work on 100% LC without advance. Looking for Real Buyer
EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles. Its parameters include density at 15C (typically at this temperature it will have a density of 0.856kg/m3 with a minimum of 0.82kg/m3 required), a typical 0.1% carbon residue value (where the maximum permitted for this grade is 0.3%). The minimum flashpoint (the lowest temperature at which the fuel produces vapour that is an ignitable mixture in air near the surface of the liquid) is 56C.
Product: EN590 10ppm or 50ppm Destination: ASWP MOQ: 100,000 Metric Ton and above Price: US$440 (validity 5 working days) Payment: Transferable IRDLC MT700 / TT MT 103