Solar, energy products, wind energy products, water treatment systems, and waste management systems.Manufacturing and exporting
Oil, gas, energy, metals.
Diesel, jet fuel and fuel products, petroleum products, crude oil.Sponsorship
Petroleum products like D1 EN590 diesel, D2 diesel, JP54, jet A1, D6 diesel, mazut M100, LPG, LNG.
Fuels, gases, minerals, sand, limestone.
Fir, far infrared, negative ion, magnetic long wave, massage, herbal, jade mattress, jade stone bed, 6 filters energy water purifier, whole house outdoor water filter, portable dry fir sauna box, negative ion air purifier.
Gasoil or D2 is the second distillate obtained from crude oil. There are varying contents of sulphur in Gasoil and D2 products that will affect when the fuel is best to use (seasons) and the cost thereof. To ensure that clients are provided with suitable D2 products, there are ISO industry standards that suppliers must adhere to. Gasoil Gas oil forms part of a family of heavy oils. It is created by means of a process of fractional distillation of petroleum. It is used as a diesel fuel in heating and automotive applications. Gas oil that is used to power off-road vehicles that are used in the industrial, commercial and agricultural communities is often called â??red dieselâ??. Fuels and oils are taxed differently depending on their purpose â?? gas oil used for tractors; mowers and tippers are dyed red in order for inspectors to tell the difference. Other gas oil is considered â??white dieselâ?? as it is not dyed. D2 Gas Oil This is gas oil that is the second distillate and is obtained through the processing of crude oil. Reformers and additives are not required to make use of this fuel. The version of D2 that has lower sulphur content is called GOST 305-82. It is presented to the market as a major reduction in pollution gas oil. GOST 305-82 GOST 305-82 is D2 with lower sulphur content. GOST is a variant of Gasoil and D2 that is in line with ISO industry standards with a sulphur content of 0.02% max. This is known as Ultra Low Sulphur fuel. Low sulphur fuel is that with 0.2% sulphur content.
Ultralow sulfur diesel ULSD is a cleanerburning diesel fuel that contains a maximum of 15 parts per million ppm of sulfur ULSD contains 97 less sulfur than lowsulfur diesel LSD which typically contains 500 ppm of sulfur The European Union began mandating the reduction of diesel sulfur content in 1993 and the United States started phasing in ULSD requirements for highway vehicles in 2006 It was developed to allow for the use of improved pollution control devices that reduce diesel emissions ULSD can significantly reduce emissions when used in combination with cleanerburning diesel engines and vehicles It may react with strong acids or strong oxidizing agents such as chlorates nitrates and peroxides You should avoid contact with heat sparks fire and oxidizing agents The appearance of ULSD should be clear and bright free from visible sediment and water
EN590 Diesel-10PPM Ultra Low Sulfur Diesel (ULSD) is a premium diesel fuel. EN 590 10 ppm is� a type of diesel fuel with a sulfur content of 10 parts per million (ppm).� It\'s a low- emission diesel fuel that\'s ideal for power generators, tower cranes, construction trucks, and excavators with diesel engines.� It conforms the European standard EN590, with an ultra-low sulfur content of only 10 parts per million (PPM). This type of diesel is known for its environmental benefits and is widely used in modern diesel engines.
Petroleum coke is a solid by-product of petroleum refining and is used in the production of carbon electrodes for the aluminum industry, graphite electrodes for steel making, as fuel in power generation, and as fuel for cement kilns. Petroleum coke is a chunky powdered carbon product derived from petroleum. If petroleum coke is heated to a high temperature, it may emit volatiles such as polynuclear aromatic hydrocarbons, which could be suspect carcinogens. Such exposures can occur in coke oven workers. North American production of petroleum coke or petcoke, as it's commonly known, has been steadily increasing since the late 80s. But innovations in bitumen extraction have allowed petcoke production to shoot up in recent years.
D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world, it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2% water and one- half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400.
We are trading with hard firewood on pallets. It can be either fresh or dry up to 20%. Available species: Ash, Beech, Birch, Oak . Best quality kiln dried Alder firewood packed in 2m3 crates. Kiln dried firewood Our company is the manufacturer of firewood and other bio-energy products like wood pellets, briquettes, wood charcoal. Kiln Dried Firewood for Sale, Oak and Beech Firewood Logs - Hornbeam Firewood - Fir Firewood - Ash Firewood - Alder Firewood - Oak Firewood - Birch Firewood - Spruce Firewood - Beech Firewood - Dried Kiln Firewood - Dried Robber wood - Dried Eucalyptus wood. Measures outside: 1.2 m * 0.8 m * 2.0 m. Split length: 25-100 cm width of the split: 8-16cm Wood fire size: 25cm, 33 cm or 50 cm; The thickness of wood is 5-15 cm. Fire wood diameter 7 - 19 cm; Moisture Content: < 20% Ash Content (db): < 0.5% Abrasion: 2.0% Calorific Value: > 4500kcal/kg Diameter: 5cm to 15cm Length: 20cm to 50m
We offer a full wholesale and bulk supply to retailers, farm shops and eCommerce partners up and down the EU and Worldwide. We only supply quality, value for money products with a consistent supply that we have worked with for many years. Our prices depends on the wood type, quantity and also depends on your location . Our pellets are flammable, pure and compact. The pellets can be use for heating, cooking, and generating electricity, etc. The pellets are also granular, slick, well-stored, efficient as well as environmentally friendly, and our prices are favorable.We are offering 6mm and 8mm Wood pellets DIN EN PLUS packed in 15kg plastic bags, big bags or bulk. Volume up to 3000t per month. We can offer the pellets delivered to your place or near port anywhere in Europe or Middle East. Bases:Pine,Beech,Fir,Spruce Oak, Hard coniferous WOOD PELLET STANDARD item value Application Heating System Density 680 Diameter 6mm-8mm Shape Stick Length 1mm-40mm Calory (J) 3.376 Moisture (%) 6.41 Place of Origin AUSTRIA Brand Name Wood Pallets Model Number W613 Ash Content (%) 1.12 Product Name 100% Wood Pellet Biofuels Raw material 100% Wood Sawdust Package 15kg Plasctic Bags Usage Heating Systym FINES Max. 1.0% Feature Eco-Friendly Certification ENplusA1/DINplusA1/NTA8080 Packing 24~26 Tons/ Container 40'HC CHEMICAL COMPOSITION 0.05 % DURABILITY 96.5
Diesel Exhaust Fluid (DEF) is a solution of urea and water that's injected into the exhaust stream of diesel vehicles to turn NOx gases (harmful emissions) into nitrogen and water. This system is called a Selective Catalytic Reduction (SCR) implemented by vehicle manufacturers to meet EPA emissions standards in 2010.
Greetings, we trust this message finds you well. We are reaching out to express our warmest regards and extend an invitation for potential collaboration. In order to better understand your requirements, we kindly request you to share the requested quantity for EN590 10PPM. This information will allow us to tailor our offer to meet your specific needs effectively. With authorized access to reputable refineries, we take pride in ensuring the delivery of high-quality products, providing exceptional service and buyer friendly procedures. Our commitment is to foster a mutually beneficial business relationship that goes beyond expectations. Looking forward to your prompt response and the opportunity to discuss further details. Origin : Kazakhstan / Russia
Petroleum coke, often abbreviated as petcoke, is a byproduct of the oil refining process. It is produced when heavy crude oil undergoes a distillation process that separates it into various components like gasoline, diesel, and jet fuel. During this process, residual oil is left behind, which is then further refined to produce petroleum coke. Petroleum coke is primarily used as a fuel source and in the production of anodes for aluminum smelting. It is known for its high carbon content, making it an efficient and cost-effective fuel for power generation and industrial processes. There are two main types of petroleum coke: calcined and green coke. Calcined petroleum coke has been heat-treated to drive off volatile substances and impurities, while green coke is typically used as a fuel source in industrial applications without undergoing calcination. Pet coke represents a valuable secondary product that can be exported to markets where it is in demand, such as in the aluminum and steel industries. Its usage as a fuel also makes it relevant for energy markets, particularly in regions where there is a need for affordable and reliable sources of industrial fuel. Origin: Kazakhstan / Russia.
Briquette dimensions (mm): 65x65x240 Package weight: 10 kg/15kg /960 kg NESTRO BRIQUETTES Made from clean sawdust produced during wood processing. Wood species: softwood. Calorific value: 17.5-20.2 MJ/kg. Ash content: ~ 0.5 %. Moisture level: < 10%. Personalized printing available. Briquette dimensions (mm): 90x300. Package weight: 10 kg/960 kg. HARDWOOD BRIQUETES Light quickly and easily. Produce a great amount of heat. Wood species: hardwood MIX. Calorific value: 4300/4500 Kcal/kg. Ash content: ~ 0.42 %. Moisture level: < 6.8%. Briquette dimensions (mm): 60x90x150. Package weight: 10 kg/960 kg. Personalized printing available. ECOLOGS A clean, sustainable, low carbon source of heat. Wood species: softwood or hardwood. Calorific value: 4600 Kcal/kg. Ash content: ~ 0.5 %. Moisture level: < 8-12%. Briquette dimensions (mm): D 90, L 28-30. Package weight: 10 kg / 960 kg. Personalized printing available.