Inner Tube (Thermoplastic Elastomer),Reinforcement (1 or 2 layers of high pressure Synthetic Fiber braid),Outer Cover (Polyurethane),Color is black,other colors upon request,Temperature: from -40C up to +90CInner Tube (Polyester), Reinforcement (one or two layers of Synthetic Fiber with one special extra fiber braid), Cover (Polyurethane) ,Working Temperature:-40�ºC up to +60�ºC Color is Black, Orange or Blue,other colors upon request ,Application: Sewer cleaning, water jetting,etc. Length: 200 meters per roll, other length is upon requestThis section covers hose for use with petroleum base hydraulic fluidswithin a temperature rangeof- -40C~ +100c.
high pressure steel wire braided steam hose 1.The rubber tube uses the heat-resisting performance good specialty elastomer manufacture, with copper-plating steel wire knitting enhancement. 2. It is suitable in the streamhandling below 165 centi-degree or Intermittent transportation temperature below 184 centi-degree saturated steam and hot water. This section covers hose for use with petroleum base hydraulic fluidswithin a temperature rangeof- -40C~ +100c.
Material:Synthetic Rubber,Capability:Rubber Oil Hose,Color:Black,Length:50-100m Surface Color:Red, Green, Blue, Yellow, Black, Gray,MOQ:200m CONSTRUCTION: This bose shal const of an imner tube of oil restat synhti nbber,two braids of siable fber, and an oil and weather rsistant syntheticrubber cover. APPLICATIONS: This section covers hose for use with petroleum base hydraulic fluidswithin a temperature rangeof- -40C~ +100c.
Fiber Braided High Pressure Air Water Fuel Industrial Hose,Application: This kind of hose could be used to delivery air, water under 40C),Construction:,Tube: black nitrile,Cover: weather, aging resistant synthetic rubber,Reinforcement: high tensile textile braid,Temperature range: -40C to+ 100 C,Application of Industrial Hose, This hose shall consist of an inner tube of oil resistant synthetic rubber,two braids of steel wire reinforcement, and an oil and weather resistantsynthetic rubber cover.
construction: this hose shall consist of an inner tube of oil resistant synthetic rubber,two braids of steel wire reinforcement,and an oil and weather resistant synthetic rubber cover. applications:this section covers hose for use with petroleum base hydraulic fluids within a temperature range of -40~+100. size:5~63 Max:working pressure:35MPa
Hebei, China, Model Number:1-1/2",Tube:Systhetic Rubber,Reinforcement:High Tensile Steel Wire Braided,Cover:ENVIRONMENT RESISTANT SYNTHETIC RUBBER,Color:Black or Red,Length:40m/roll,Surface:cloth,Working temperature:-45â??/+320â?? -45â??/+160â??,Working pressure:10Bar or 20Bar,Standard:SAE100R1/EN853 1SN SAE100R2/EN853 2SN,Size:1/4"~2",Processing Service:OEM,Supply Ability,Supply Ability: 500000 Meter/Meters per Month,Packaging & Delivery,Packaging Details 1.The default is the wear-resistant woven strip packaging 2.If you need other packaging like wooden box and pallet,please contact us. 3.The volume is for 1 roll and the weight is for 1 m. 4.This price is for 10 Bar hose, if used 20 Bar W.P pls contact us.
LTD is a top Rubber Air Hose, PVC Air Hose, Hybrid Air Hose, Twin Welding Hose, Garden/Water Hose, Jackhammer Hose, Pressure Washer Hose, Hose Reels and Air Accessories manufacturer in China. With new products - Hybrid PU Air Hose, which combines the both characteristics of Hybrid Hose and Polyurethane Hose, very Lightweight and Durable, keeps extreme Flexible in -58�°F weather conditions. Founded in 2000, we specialize in HOSES & Air Accessories, We have an annual production capacity of 30,000,000 meters, and annual revenue of around US$ 10~30 Million. We have been exporting to North America since 2005, and our clients include Home Depot, Lowe's, Tractor Supply Co., Dewalt, Harbor Freight Tools (CPI), Plews, Wood Industries, Astro Pneumatic, Grip on tools, Forney Industries, Canadian Tire Corporation, Princess Auto, Toolway Industries, Prime line Tools, New-line, Samona, and many others. We also have a number of clients in Europe.
mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission, the highest working pressure can reach 70-120Mpa.
High Pressure Nylon Resin Hose Description: This product is widely used in various industries because of its high pressure resistance, high temperature resistance, wear resistance, oil resistance, various chemical reagents, anti-aging, and long service life. 1. The pressure braking system of the car; 2. The power steering system of the car; 3. Brake pipeline control system of automobile; 4. Gearbox control system; 5. Construction machinery, such as: hydraulic transmission system and hydraulic control system of excavator, loader, crane; 6. Hydraulic operation and hydraulic control system of mechanical processing equipment; 7. Tubes for high-pressure painting; 8. Pipe for liquid resin transportation.
Product Description: Sand blasting hose is used for conveying sand or other abrasive materials engineered for sand/shot blasting purposes in ordnance factories, steel furniture manufacturing workshops and heavy engineering industries, etc. Tube: High quality wear-resistance rubber. Cover: High quality rubber material is anti-aging and wear resistance. Reinforcement: Multi-layer of spiral fabric reinforcement.
The high pressure steam hose is designed for transfer of steam in many applications, such as fire prevention, heat control and industries where steam must be transferred safely and reliably. It is resistant to bursting, cracking and crushing even under accidental exposure to flame, while being quite flexible and resistant to vibration. It consists of black, smooth, EPDM rubber especially compounded to withstand super heated steam. It is covered with smooth, black and weather abrasion and reinforced with piles of carbon steel wire. Tube: Black, smooth, EPDM rubber especially compounded to withstand super heated steam. Cover: Red, smooth (wrapped) EPDM rubber with excellent resistance to high temperature, weather, abrasion and aging. It is pin-pricked to prevent separation. Reinforcement: Piles of carbon steel wires. Temperature: -40 C to +236 C (-40 F to +456 F).
Tube: Smooth NR/ synthetic rubber, generally color is black Reinforcement: spiral fabric, steel wire spiral layer, Cover: Oil, abration and weather-resistant wrapped synthetic rubber. Performance: 1. Rubber hose pipes are used with dredgers for silt/gravels conveyance. 2. Pipe wall thickness range: from 20mm up to 50mm. 3. The suitable working temperature: from -20�°C to +80�°C. 4. Abrasion-resistant and bending â??resistant. 5. It is convenient to install, flexible to use and safe. Dredge Slurry Suction Hose Applications: installed between the pump and cutter of the dredger, suction the slurry. suction hose &Aamored hose with HB steel ring in, suitable for limestone, granite, coral and mineral, etc.
Automotive hydraulic hose is mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission, the highest working pressure can reach 70-120Mpa.
Rubber hose for gas drainage Application: There are many types of mining hoses, which refer to all rubber hoses suitable for mining in coal mines and mines. Common coal mine hoses include hydraulic support hoses, mining drainage hoses, mining spray pipes, mining exhaust hoses, coal mine hydraulic oil pipes, etc.
Drilling Hose is mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission. In addition,BOPcontrol hose is widely used in these fields.
SAE100 Standard Rubber Hose is mainly used for mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments In the mechanized and automated hydraulic system, petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, etc.) with a certain pressure (higher pressure) and temperature are transported Water), etc. and liquid transmission, the highest working pressure resistance can reach 70-120Mpa.
Model Number: Reducer Material: Stainless Steel Technics: Forged Connection: Welding Shape: Equal Head Code: Round Product name: Stainless Steel 304/316 Butt Weld Pipe Fittings Concentric Reducer Size: 1/2" to 48" Thickness: sch5 to sch160 Standard: ASME, DIN, JIS, etc Certificate: PED,ISO Delivery time: 30days Packing: Wooden Case
Processing Technology Raw materials entering the factory (re-inspection) Cut into blanks Hot Push Forming Plastic Heat Treatment Machining Groove Surface Treatment Inspection of Finished Products Identification Protection Put In Stock (Note: There is a pickling and passivation process for stainless steel products before urfacetreatment) Size 1/2"-120" Standard ASTM A234 WPB, WPC, WP11, WP12, WP5, WP91, WP22 ASTM A403 WP304, WP304L, WP316, WP316L, WP321 ASTM A420 WPL3, WPL6 API 5L L245(NB), L290(X42), L320(X46), L360(X52), L390(X56), L415(X60), L450(X65), L485(X70), L555(X80) EN 10253-2 P235GH, P265TR2, P265GH, P355NHL245(NB), L290(X42), L320(X46), L360(X52) L390(X56), L415(X60), L450(X65), L485(X70), L555(X80) ASTM A105 A105, A105N ASTM A350 LF1, LF2, LF3 ASTM A694 F42, F45, F50, F52, F56, F60, F65, F70 ASTM A182 F5, F9, F11, F22, F91, F304, F304L, F316, F316L, F316H, F321 F347 F347H Wall Thickness SCH10, SCH20, SCH30, STD, SCH40, SCH60 XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS Color Black, Yellow, Blue, Red. etc as client requirment. Surface Coating Rust-proof oil; Black; Galvanized; Polyethylene Coating; Epoxy Coating, etc Marking Marker permanent Package Ply-Wooden Case for small size Pallet for big size Certificate BV ISO9000,CRN,CE The Third Party Inspection BV, SGS, LOIYD, TUV, and other party alloyed by clients Brand TSZHONGRAN Min Order 1PCS Payment Terms T/T, 100% LC AT SIGHT, 100% LC 30 OR 60DAYS AFTER BL OF DATE, Delivery Time 7-30days according to acutal order. Delivery Port TIANJIN, QINGDAO, SHANGHAI Delivery Ability 3000TONS/MONTH Applicating Paper-marking, Oil and natural gas pipeline, Boiler and heat exchanger, Smelting,Water conservancy, Electric power, Chemical, Pharmaceuticals etc
Floating oil and marine hoses are designed and produced in full accordance to OCIMF standards. These porducts are also subjected to manufacturing and testing requirements dictated by ISO9000:2001 quality standards.
Seamless Nickel Alloy Steel Tube&Pipe Description: Product Name ASTM B444 B829 Haynes 230 Haynes 556 Nickel Alloy Tube High Temperature Alloys Pipe Manufacture Standards ASTM B163, B165, B167, B407, B423, B444, B622, B677, B729, B829, B983, etc. Material Hastelloy Series, Haynes Series, Inconel Series, Incoloy Series, Monel Series, Nickel Series, High Temperature Alloys Application Chemical process industry, heat treating fixtures, airframe components and nuclear reactors, power generation equipment, seawater application, etc. Hastelloy Series: Hastelloy B(UNS N10001), Hastelloy B-2(UNS N10665), Hastelloy B-3(UNS N10675), Hastelloy C-4(UNS N06455), Hastelloy C-22(UNS N06022), Hastelloy C-276(UNS N10276), Hastelloy C-2000(UNS N06200), Hastelloy G-30(UNS N06030), Hastelloy G-35(UNS N06035). Haynes Series: Haynes 230(UNS N06230), Haynes 556(UNS R30556). Inconel Series: Inconel 600(UNS N06600), Inconel 601(UNS N06601), Inconel 617(UNS N06617), Inconel 625(UNS N06625), Inconel 690(UNS N06690), Inconel 718(UNS N07718). Incoloy Series: Incoloy 020(UNS N08020), Incoloy 800(UNS N08800), Incoloy 800H(UNS N08810), Incoloy 800HT(UNS N08811), Incoloy 825(UNS N08825), Incoloy 925(UNS N09925). Monel Series: Monel 400(UNS N04400). Nickel Series: Nickel 200(UNS N02200), Nickel 201(UNS N02201). High Temperature Alloys: GH2132,GH3030,GH3039,GH3128,GH3044,GH4080A Our product enjoys a good reputation in the market of the USA, Canada, Brazil, Mexico, Germany, Italy, Netherland, Britain, Australia, Russia, South Korea, Thailand, Philippines, Malaysia, Iran, South Africa, Ghana and etc. If you have any demands or inquiries, please feel free to send it to us.
