The high pressure steam hose is designed for transfer of steam in many applications, such as fire prevention, heat control and industries where steam must be transferred safely and reliably. It is resistant to bursting, cracking and crushing even under accidental exposure to flame, while being quite flexible and resistant to vibration. It consists of black, smooth, EPDM rubber especially compounded to withstand super heated steam. It is covered with smooth, black and weather abrasion and reinforced with piles of carbon steel wire.
Tube: Black, smooth, EPDM rubber especially compounded to withstand super heated steam.
Cover: Red, smooth (wrapped) EPDM rubber with excellent resistance to high temperature, weather, abrasion and aging. It is pin-pricked to prevent separation.
Reinforcement: Piles of carbon steel wires.
Temperature: -40 C to +236 C (-40 F to +456 F).
Mine hose assembly supplier Description: Mine hose assembly supplier structure The three-layer structure of the inner rubber layer, skeleton reinforcement layer, and outer rubber layer; due to the special environment of a coal mine operation, it is generally required to provide protective devices such as hose sleeve, sheath, and reel. Mine hose assembly supplier characteristics According to the specific application type of mine hoses, coal mine hoses have wear resistance and oil resistance characteristics; for coal mine, hydraulic support hoses, high-pressure resistance, and high pulse resistance characteristics are required; for different application areas, for extremely cold areas, mines The hose needs to have the function of cold resistance and low-temperature resistance. Mine hose assembly supplier Application: There are many types of mining hoses, which refer to all rubber hoses suitable for mining in coal mines and mines. Common coal mine hoses include hydraulic support hoses, mining drainage hoses, mining spray pipes, mining exhaust hoses, coal mine hydraulic oil pipes, etc.
Special Hose Assembly for Hydraulic Support Description: Special Hose Assembly for Hydraulic Support structure The three-layer structure of inner rubber layer, skeleton reinforcement layer and outer rubber layer; due to the special environment of coal mine operation, it is generally required to provide protective devices such as hose sleeve, sheath and reel. Mine hose assembly factory characteristics: According to the specific application type of mine hoses, coal mine hoses have wear resistance and oil resistance characteristics; for coal mine, hydraulic support hoses, high-pressure resistance, and high pulse resistance characteristics are required; for different application areas, for extremely cold areas, mines The hose needs to have the function of cold resistance and low-temperature resistance. Mine hose assembly factory Application: There are many types of mining hoses, which refer to all rubber hoses suitable for mining in coal mines and mines. Common coal mine hoses include hydraulic support hoses, mining drainage hoses, mining spray pipes, mining exhaust hoses, coal mine hydraulic oil pipes, etc.
Supplier: Sae series rubber hose en series rubber hose petroleum equipment hose offshore oil hose mine hose assembly construction machinery hose dredge suction & discharge hose high temperature steam hose high wear resistant sand blast hose high pressure nylon resin hose other industrial hose
-thickness: 0.40mm-0.45mm -endure high temperature: +300�??. Material -made of fire proof fiber glass and silica gel coating. -thickness: 0.40mm-0.45mm -endure high temperature: +450�??. -supported by steel wire and black rubber strip. -sewn with heat resistant thread. Features -soft, fire resistant, wear proof, easy connection -flexible and light weight for easy use and installation. Rolls up for easy transportation and storage. Application Hot air exhaust and supply for smelting, boiler, heat equipment in high temperature environment. -high temperature boiler air exhaust and supply - motor vehicle exhaust emission -factory solder smoke
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
Acid / Alkali Resistant Tiles/Bricks * Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7. * The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives). Corrosion Protection Applications * Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents * Pickling tank and surrounding areas * Food & Beverage Industry flooring * Battery rooms and Control rooms * Demineralization plants * Walls of washing and Paint shop areas * Acid Resistant Tiles Manufacturers India * Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years. APPLICATIONS Soil stabilization Mortar Used in combination with Portland cement Pre-cast concrete Ready mix concrete Specialist projects
Hebei, China, Model Number:1-1/2",Tube:Systhetic Rubber,Reinforcement:High Tensile Steel Wire Braided,Cover:ENVIRONMENT RESISTANT SYNTHETIC RUBBER,Color:Black or Red,Length:40m/roll,Surface:cloth,Working temperature:-45â??/+320â?? -45â??/+160â??,Working pressure:10Bar or 20Bar,Standard:SAE100R1/EN853 1SN SAE100R2/EN853 2SN,Size:1/4"~2",Processing Service:OEM,Supply Ability,Supply Ability: 500000 Meter/Meters per Month,Packaging & Delivery,Packaging Details 1.The default is the wear-resistant woven strip packaging 2.If you need other packaging like wooden box and pallet,please contact us. 3.The volume is for 1 roll and the weight is for 1 m. 4.This price is for 10 Bar hose, if used 20 Bar W.P pls contact us.
W/B Hose I.D Hose O.D Working Pressure Burst Pressure Minimum Bend Radius Length DN inch mm MPa psi MPa psi mm metres 1W 10 3/8 21.5 1.0 150 4.0 570 130 20/ 50 13 1/2 24.5 1.0 150 4.0 570 180 20/ 50 16 5/8 27.5 1.0 150 4.0 570 205 20/ 50 19 3/4 30.5 1.0 150 4.0 570 240 20/ 50 22 7/8 33.5 1.0 150 4.0 570 280 20/ 50 25 1 37.0 1.0 150 4.0 570 300 20/ 50 32 1 1/4 44.0 1.0 150 4.0 570 420 20/ 40 38 1 1/2 50.5 1.0 150 4.0 570 500 20/ 40 45 1 3/4 57.5 1.0 150 4.0 570 500 20/ 40 51 2 63.5 1.0 150 4.0 570 630 20/ 40 64 2 1/2 77.5 1.0 150 4.0 570 700 20/ 40 2W 10 3/8 23.0 2.0 300 6.0 860 130 20/ 50 13 1/2 26.0 2.0 300 6.0 860 180 20/ 50 16 5/8 29.0 2.0 300 6.0 860 205 20/ 50 19 3/4 32.0 2.0 300 6.0 860 240 20/ 50 22 7/8 35.0 2.0 300 6.0 860 280 20/ 50 25 1 38.5 2.0 300 6.0 860 300 20/ 50 32 1 1/4 45.5 2.0 300 6.0 860 420 20/ 40 38 1 1/2 52.0 2.0 300 6.0 860 500 20/ 40 45 1 3/4 59.0 2.0 300 6.0 860 500 20/ 40 51 2 65.0 2.0 300 6.0 860 630 20/ 40 64 2 1/2 79.0 2.0 300 6.0 860 700 20/ 40 nelon
