Steel Forged Endplate Flanges of Concrete Piles D300x180x12mm (6 holes) D350x220x12mm (7 holes) D400x250x12mm (10 holes) D500x320x14mm (12 holes) D600x400x14mm (18 holes) D600x400x16mm (18 holes) Delivery time: Negotiate Packing: bulk package then to container Payment term: By irrevocable L/C at sight
Our manufacturing facilities is well equipped to manufacture various types of flanges namely Blind , Weld Neck , Slip On , Socket End, Threaded and Lap Joint Flanges. We produce flanges in the size range from DN10 to DN300.
Double flange ballnut. C7 Rolled and C3,C5 Ground Ballscrew are available. The model for BSF series Ballscrew included: 1605 ,1610 ,2005 ,2010 , 2505 ,2510 ,3205 ,3210 FBT Ballscrew Features: 1)High Reliability 2)High Precision 3)Smooth Movement 4)High Axial Stiffness 5)OEM/ODM Production.
FBT Linear Guide Features: 1)High Accuracy 2)High Speed 3)High rigidity with four way-load design 4)Easy Maintenance BLH-F series This series are for Flange Carriage The size included: BLH15F BLH20F BLH25F BLH30F BLH35F BLH45F
BSF Ballnut: C7 Rolled and C3,C5 Ground Ballscrew are available. The model for BSF series Ballscrew included: 1204 ,1605 ,1610 ,2005 , 2010 ,2505 ,2510 ,3205 ,3210 FBT Ballscrew Features: 1)High Reliability 2)High Precision 3)Smooth Movement 4)High Axial Stiffness 5)OEM/ODM Production.
What is a blind flange A blind flange is a solid disc that is used to block a pipe or form a stop. Similar to a regular flange, a blind flange has mounting holes at the perimeter and gasket sealing rings machined into the mating surface. the blind flange has the face thickness of a flange, matching face type and a similar bolting pattern. Blind flanges are typically used to enclose the end of a pipe. They are also used for similar valve and pressure vessel openings. Because they are usually located at the end of a system, these flanges are usually among the highest stress flange types. tapped blind flange is only suitable for low-pressure systems where there is no thermal cycling that could cause thread loosening. Threaded pipe flanges are equipped with a tapered female thread into which the pipe can be screwed. tapped blind flange can be used in areas where thermal processing (welding, burning and grinding) is not desired. Flange Materials. Carbon Steel - ASTM/ASME SA-105, A-350 LF-2, LF-3, A694, SA-516-70 Stainless Steel - A-182 - F-304, 304L, 316, 316L, 309, 310, 317L, 321, 347, Alloy 20 In specifications of past decades, including B16.1 and other industry standard cast steel requirements, blind flanges typically contain a slight groove in the center portion of the convex face. This recess allows the pipe end to fit into the connection flange and allows a seal to be formed between this connection flange and the blind. Larger OD blind flanges have opted for a concave recess through the body of the shutter to create a disc-shaped head structure at the top of the flange. Because older cast iron specifications are relatively obsolete, these styles are not used to make most blind flanges. Instead, choose a modern blind flange with or without a hub. Fusion Fittings offers threaded pipe flanges in A105N, A105, SS316, SS304, and A20, high-yield nickel alloys
Stainless Steel Flanges Nickel Alloy 200 Flanges Monel 400 Flanges Inconel 600 Flanges Inconel 625 Flanges Incoloy 800 Flanges Incoloy 825 Flanges Titanium Gr2 Flanges Hastelloy C276 Flanges Duplex Steel 2205 Flanges Slip on Flanges, Plate Flanges, Ring Type Joint Flanges, Weld neck Flanges, Long weld Neck Flanges, Lap Joint Flanges, BLRF Flange, Spectacle Blind Flanges, Orifice Flanges, WNRF Flange, Forged Flanges, Blind Flanges, SORF Flange, RTJ Flanges, Threaded Flanges, Socket weld Flanges, Nipo Flange, Flat Flange, Nipolet Flanges, Spacer Ring Flanges
FORGED FLANGE
Dimensions: 600mm x 600mm | 600mm x 800mm Panel Thickness: 30 mm | 35 mm Top: Flat steel Bottom: Flat steel uniquely designed to form hemispherical reinforcing pockets Core: Lightweight proprietary cementitious mixture The cantilever edges of the panel are reduced and this unique product design enhances the technical performance of the system, reduces the risk of damage at site and aims to provide tremendous advantages to the user.Non-combustible Coated with Electrostatic Epoxy paint. top finsih Bare, HPL and PVC conductive. Under structure can be Corner Lock or Edge Support Rigid Grid System
The Flange Fittings are best suitable for high pressure application. We give utmost care to the quality and make sure that these bend pipe fittings are leak proof. We Deals in Code 61 and Code 62 Flanges which ranges from 3000 p.s.i to 6000 p.s.i .
Blind Flange Lockout BAN-F68M Item No: BAN-F68M Unit: Piece Material: PA66+ 33% Fiber + Steel Weight: 550g Color: Red Description: Device fully conceals flange bolts preventing access to the blind until all work has been completed Adjustable device provides a tight fit, adapting to multiple flanged pipe applications Recommended for use with nut diameter from 3/4in to 1-1/8in (19mm 28.7mm) Four lockout holes allow for multiple workers to lockout device at one time Durable aluminum and hardened steel construction withstands conditions indoors and out Blind Flange Lockouts BAN-F68L Item No: BAN-F68L Unit: Piece Material: PA66+ 33% Fiber + Steel Weight: 680g Color: Red
Stainless steel flanges connect with pipe and fittings to form a piping system that delivers air, water, natural gas, oil, and steam in plumbing applications and food and dairy processing. Flanges provide easy access for cleaning, inspection, and modification. Flange types including blind, butt weld, lap joint, slip-on, socket weld, and threaded, are available in a variety of sizes and shapes. Stainless steel is durable, resists corrosion from caustic chemicals, corrosive fluids, oils, and gases, and withstands pressure and high temperatures. Keywords: Welding Neck Flange,Blind Flange,Socket Weld Flange.Lapped Joint Flange,Slip-on Flange,Plate Flange Size: NPS from 1/2'' to 24'', CLASS from 150 to 2500 Standard: ANSI/ASME B 16.5, DIN, JIS, AWWA, API, ISO etc Material: Carbon Steel --- ASTM A105,ASTM A350 LF1,LF2,LF3,A36,ASTM A234 WPB;Stainless Steel --- ASTM A403 F304/304L, 316/316L,316Ti,321,317L,310S;Alloy Steel --- ASTM A234 WP1/5/9/11/12/22/91 Ends: Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends
Available in: SS,MS,CS, Copper, Brass, Titanium, Inconel, Monel, Alloy, Hastelloy, Duplex, Super Duplex and etc as well Standards- ANSI , ASME , BS , DIN , EN , etc Dimensions- ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, et
1.High corrosion resistance 2.Strong bearing,Light weight 3.Easy installation 4.Excellent fatigue durability 5.Plastic pipes Features: 1. High corrosion resistance 2. Excellent fatigue durability, more than 30 years design service life 3.Strong bearing, high safety coefficient 4. Light weight, easy installation 5. Fine tightness connected with steel pipe 6. No electrical conductivity, smooth internal surface and low friction coefficient improve the efficiency of fluid transport 7. High, middle, low pressure rating satisfy different medium transport
Double studded adapter flange is a combination of flanges of different sizes and pressure ratings. DSA for reliable and consistent performance on their production system. Our adapter flanges are in various sizes and pressure ratings as per customer's specified thickness, consistent with design considerations. It is the important device to connection the different flange for wellhead, so the material of the body and studs and nuts shall be conforms the related requirements. The size is in accordance with API 16A flange certification.
1.High corrosion resistance 2.Strong bearing,Light weight 3.Easy installation 4.Excellent fatigue durability 5.Plastic pipes Features: 1. High corrosion resistance 2. Excellent fatigue durability, more than 30 years design service life 3.Strong bearing, high safety coefficient 4. Light weight, easy installation 5. Fine tightness connected with steel pipe 6. No electrical conductivity, smooth internal surface and low friction coefficient improve the efficiency of fluid transport 7. High, middle, low pressure rating satisfy different medium transport
Flanges used for steel pipeâ??s connection are various. So we should make our flanges lead to the purpose of our steel pipes like seamless or erw steel pipe. So we need to do some lesson before purchase. Function of long weld neck flanges is predominantly on vessels. We know that vessels have some places need an extended neck so flange can do this job for us. The purpose of tapered neck is to reduce the thickness of the steel and it then seems to be a pipe extension. The combination of steel pipe and long weld neck flange would make the whole engineering project easy and convenient. Utilized in the chemical and petroleum industries, as well as commercial and residential buildings that experience high levels of stress and temperatures that fluctuate, flanges have played an important part during our daily life.
1.High corrosion resistance 2.Strong bearing,Light weight 3.Easy installation 4.Excellent fatigue durability 5.Plastic pipes Features: 1. High corrosion resistance 2. Excellent fatigue durability, more than 30 years design service life 3.Strong bearing, high safety coefficient 4. Light weight, easy installation 5. Fine tightness connected with steel pipe 6. No electrical conductivity, smooth internal surface and low friction coefficient improve the efficiency of fluid transport 7. High, middle, low pressure rating satisfy different medium transport
Standards ASTM / ASME A182 / SA182 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
Standards ASTM / ASME A182 / SA182 Dimensions ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 Pressure Rating Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Pressure Calculation 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Flange Connect Type/ Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove Flange Size Chart 1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000 DIN Flanges DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 Table D, E, F, H Test Certificates EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc Flange Form Slip On Flanges, Socket Weld Flanges, Forged Flanges, Blind Flanges, Welding Neck Flange, Ring Type Joint Flange, Spectacle Blind Flange, Reducing Flange, Threaded / Screwed Flange, Tongue and Groove Flange, Long Weld Neck Flange, Plate Flange, ASME B16.5 Flange
