Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
We can produce different lengths 6mm, 12mm, 18mm and 24mm Usage: Glass fiber is suitable for use in waterproof plasters, cement-sand screeds, monolithic filling of external and internal walls, and structural thermal insulation. In industrial and housing construction. Recommended for the production of foam concrete paving slabs, and concrete plates. Ideal for underfloor heating systems.
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
we can product 45g-180g fiber glass mesh,for width we can product 5cm-120cm. For length we can do as customer request.from 10m -1000m. We have been exporting for ten years, exporting 500-700 containers to foreign countries every year. If you need the price or have any questions, please contact me
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
GFRP rebar with sand coating has better adhesion to concrete. It's available in rods d 4-32mm or in coils of 50-200m.
GFRP rebar with sand coating has better adhesion to concrete. It's available in rods d 4-32mm or in coils of 50-200m.
The bending of the composite reinforcement bars is impossible but the extensive capabilities of our production line and its additional settings help us to produce the bent elements of any shape and size. The strength of the rod is not less than 1000 MPa. The strength at the bend point is not less than 600 MPa.
2 SIDES SILICON COATED SERVICE TEMPERATURE OF FABRIC ; 550 C SERVICE TEMPERATURE OF SILICONE ; 260 C
The main products of the company are: pipeline glass fiber cloth, non-alkali glass fiber cloth, non-alkali hydrophobic glass fiber cloth, 7628/2116/1080 electronic cloth, glass fiber belt, black glass fiber cloth, mesh cloth, high silicon oxygen fiber cloth, fire cloth, fire blanket, three anti cloth, T cloth, etc.
Deal with alkali-free Glass fiber cloth. Quantity: 3-4 tons
WE ARE SUPPLIER OF FRP (FIBER REINFORCE PLASTIC) GRAINGS WHICH HAVING FEATURES AS: CORROSION FREE ANTI THEPT ANTI FLAMABLE OPEN TO SKY LIGHT WEIGHT ASTHETIC LOOK
FRP Products, We Are a Designer And Manufacturer Of Fibre Glass Products. Will Be Priced According To The Customer's Needs,.
We are manufacturing all kind of fiber Glass product. Fiber glass lining on Tipper ,Trailers, Dumpers and also deals in Fiber Glass bus body parts. We can provide customized product as per drawing and requirement of company.
As a subsidiary of a Chinese state-run company. it offers the best quality & most competitive price.
FRP Rebar is a new kind of composite material, which is glass fiber as reinforcement material, combines with epoxy (resin) and curing agent, then through pultrusion molding process. Fiberglass imparts the strength of the rod, while resin imparts excellent corrosion resistance to harsh chemical and alkaline environments. The products are widely used in construction, transportation industry, coal mine tunnel, parking structures,half coal roadway, slope support, subway tunnel, rock surface anchoring, seawall and dam etc. Main Features Corrosion Resistance: The base materials used by the bolt are durable materials, and they are molded through the composite process. The life span is up to 100 years. High Tensile Strength: The load is approximately double that of a steel bar with the same diameter; Light Weight: The weight is only 1/4 that of a steel bar with the same diameter.Therefore, the labor intensity is greatly reduced, and the transportation cost is reduced at the same time; Anti-static: It has no electrical conductivity, and no sparks will be produced when being cut. It is particularly suitable for high gas zones. The GFRP rockbolt is a fully threaded rodmade of glass fiber and reinforced resin with filling materials such as curingagent and flame retardant, and processed by pultrusion, winding and otherprocesses. The supporting tray nut is the GFRP rockbolt. It is mainly used forthe support of coal mine rock tunnels, semi-coal rock tunnels, coal walls,surrounding rock faces, slope anchoring and other underground projects.
Glass fiber reinforced plastic (FRP) grating isa kind of glass fiber reinforced material. It is a new material which iscomposed of unsaturated polyester resin andglass fiber.It can be used for car wash house, tree grate,poultry farming, power plant, trench cover, sewage treatment plant and so on.It is corrosion resistance, flame retardant, no magnetic insulation, brightcolors, etc.We could customize different colors and sizesaccording to customers' requirements, and we can also increase the acid andalkali resistance and corrosion resistance of the products according to theactual conditions of the usage. Main Features Corrosion Resistance: Resistance to acid, alkali, salt, etc.; Light Weight: High strength, Reduce the weight of the structure; Design ability: Cutting any size us convenience, any color available; Anti-Slip: The special structure of the grating determines that it is anti-skid; Electrical Insulation: No breakdown at 10KV voltage, can be used in magnetic sensitive equipment; Anti-Aging: Service life of more than 20 years Application The FRP Grating is interwoven by glass fiber andmolded by resin pouring. The grille plate with many regular rectangular andsquare Spaces is made. It has the mechanical characteristics of bidirectional,can be widely used in petroleum, chemical electronics, electric power,electroplating, Marine exploration, sewage treatment and other industries ofwork platform, equipment platform, drilling platform, walkway, etc.
FRP pultrusion profiles are made of continuous glass fiber roving, continuous glassfiber mats and surface mats under the pultrusion molding machine's traction,and then dipped in a mold to form profiles, bars and tubes with various cross-sectional shapes and sizes. The tensile strength is higher than ordinary steel. The resin rich layer on the surface makes it have good corrosion and weather resistance, it is good choice to replace steel in corrosive and open-air environments. Main Features High Strength:Light Weight 1/4 of steel, 2/3 of aluminum. Anti-Corrosion:Resistance to acid, alkali, organic dissolvent and other gas and liquidmixture. ElectricInsulation: 10KV no voltage breakdown, no electro-magnetic behavior andelectric spark. Anti-Skid:Different process mode on surface, concave, gritted, increase friction factor. Anti-Aging:Have more than 20 years effective service life under normal outdoor workingcondition. Anti-Fatigue:Moderate flexibility reduces the workers' pressure on legs and waist EasyMaintenance: Have alternative and bright colors, non-fading, easy to clean. Application Outdooractivities: tent pole, arrow shaft, FRP I-shape beam, fishing rod, golf shaft,sail batten, skate boards, paddle shafts, slide guides; Tool:curtain rod, fence post, rail, handrail, frame for cases and bags, flag pole,oil sucker rods, bolts, stair, ladder, greenhouse structures,scaffold,portable work platforms, cooling tower, window/door frame, sign post, bridgestructure, bus bar supports, tool handles, bike flags,flag poles, floorgratings, shoe soles; Vehicle:motor top sticks, u-shaped motor stator wedges, service truck booms, snowmobiletrack stiffeners, high-end automobile components,bicycle frames, glider,microcar; Pipe: gutters, firewater/ cooling water /gas /drinkingwater/ waste water pipe; Building: roofing laminate, door surrounds, windowcanopies and dormers, chimneys, coping systems, insulators, cable conductor,cable tray, transformer air duct spacer sticks, cable support trays, etc.
