Fiber glass Application: Virtually any commercial or residential application of drywall finishing repairing the cracks and joints or holes of drywall plasterboard fstucco and the other surface. Performance include: Self-adhesive, faster application, no pre-plastering required, easy to apply, resists cracking, do no rot, no blisters or bubbles, more environmentally-friendly job.It won't tear, shrink, stretch or bubble, while it hides joints, cracks and holes permanently. Specification: Width (mm): 25, 35, 48, 50, 100, 150, 200, 1000, 1200 Length (m): 10, 20, 30, 45, 90, 153 Mass:from 55 to 85g/sq.Meter. Mesh: 8f-8 or 9f-9mesh/inch. Colour:white, yellow, blue etc.. Jumbo roll: 1200mm x 450m or 900m Drywall seaming tapes as well as private label and unlabeled tapes. Each roll is shrink-wrapped, or plastic hand bag. Other specification are available upon request. Testing standard: astm-d579
Fiberglass insect screen Application: It is widely used in construction (the advanced aluminum alloy doors and windows, steel doors and windows and windows with automatic rolling screen), ranch and horticulture or garden (various air-exchanging equipment in vegetable shed for against insect and mosquito.), etc. Performance: Easily washing, anticorrosiveness, high tensile stre-ngth, anti-deformation , non-adsorption, good light transmission and durability, fire retardant, stable shape , alkali resistant and against other chemical corrosion, well ventilate, feels straight, preventing from dirt , static and ultraviolet radiation , low coefficient of heat expansion and cold shrinkage, proper mesh, beautiful and long life, no pollution, etc. Specifications: Mesh/inch: 20x20, 18x18, 18x16, 18x14, 16x16. Weave: plain weave Width: 61cmf¼220cm Colors: black, grey, grey/white, green, etc. Standard roll length: 30m, 30.48m, 50m Also can produce upon customersf+ request Standard packing
Application Operation terrace; off-shore oil rig; Inspection rack; Stair tread; Ground floor; Trench cover; Bridge sidewalk; foot bridge; Equipment safety fence; Stair landing; Scaffold; filling supporting; Decorating grid; Air grid, etc.Details as follow: Wastewater Treatment:Cover of trench,Walkways, Drain, Large capacity vessel,Washing machine,Water channel, Ventilation valveStair treads , Flooring Chemical Plant: Stair trends,Wooden platform,Cover of concrete pool,Replacement of metal grating. Textile Plant: Replacement of metal grating,Wooden platform and cover of concrete pool,Flooring around bleaching,dying area,Floor around pumps and valves area. Power Plant: Wastewater pool etc.. Metal finishing :Acid washing area,Replacing wooden floor at the surrounding of machines. Sea food Processing: Oily surface contaminated area,Marine. Transportation: Platform,Ships,contaminated area,Stair treads. Beverage Plant :Stair treads,Replacing stainless steel,Floor grating. Pulp and Paper Works: Stair treads and platform,Walkways,Walkways of wet area. Meat Processing Works:Floor of easily corrosion area,Ladder,Platform of oily floor and stair treads. Performance: Corrosion-resistance, Fire retardant, Light in weight and high in strength, Designable, impact resistance,non-magnetic,Aging-resistance, Safe and anti-skid, many colours,Insulation and non-conductive, stable size,long service life,attractive and maintenance freedom,anti-fatigue,non-sparking,installation easy. Specification: Color: green,orange,grey,dark grey,red,blue,etc.Resin: Orthophthalic Polyester, Isophthalic Polyester, Vinyl Ester. Surface: plain ,Meniscus,Smooth, covered Grit ,Lozenge. Normal size(length x width x height): 12f+x4f+x1fª, 12f+x4f+x1.5fª,12f+x4f+x2fª, other upon your request. Standard Packing
They are made of yarn or roving by means of leno or plain weave.The diameter of elementary glass fibres varies between 9 and 17micron. Mesh fabrics combined with specially designed mesh surface treatments can be used in a wide range of applications, but are mainly used in construction industry. Surface treatments based on styrene-butadiene ensure alkali resistance and increase the mechanical durability that is required by the construction industry. In addition, other surface treatments based on pvac , pvc or styrene-acrylate are used for different. Name of application Used type of mesh fabrics Finishing components manufacturing Al60 al76 al100 al120al145al159al160 External and internal plaster reinforcement Al60 al65 al100al110al120al130al159al160 al343 al540 Style of reinforced lightweight construction boards Al90 al100 Marble slab reinforcement Al63 al70 al80(with a105 treatment) Mosaic carrier Al130 al145 al159 al160al201 Electrical heating mats Al90al130 Floor reinforcement Al110 al120 al130 al138 al217 Asphalt and other insulator reinforcement Al60 al70 al110ap60 ap70 ap82 Applications: Example of marking Example:al68 a101 Al68 type of fabrics (al-mesh)with finished fabrics weight in g/m2(68g/m2), af¼alkali resitance, lf¼leno, (pf¼plain). A 101-alkali resistant surface treatment A 105-surface treatment with soft or hard resin Lits of applications by types of mesh fabrics.
Self adhesive fiberglass drywall joint tape Self adhesive fiberglass drywall joint tape is the joint tape which is sectioned and finished after the disposal of immersing the anti-alkali glue. This products are widely used for strenghening the drywall and the joint of the board in construction field, and it is the most ideal material of anti-cracking of the wall.
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars. For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin. We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars. For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin. We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
We can produce different lengths 6mm, 12mm, 18mm and 24mm Usage: Glass fiber is suitable for use in waterproof plasters, cement-sand screeds, monolithic filling of external and internal walls, and structural thermal insulation. In industrial and housing construction. Recommended for the production of foam concrete paving slabs, and concrete plates. Ideal for underfloor heating systems.
We can produce different lengths 6mm, 12mm, 18mm and 24mm Usage: Glass fiber is suitable for use in waterproof plasters, cement-sand screeds, monolithic filling of external and internal walls, and structural thermal insulation. In industrial and housing construction. Recommended for the production of foam concrete paving slabs, and concrete plates. Ideal for underfloor heating systems.
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars. For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin. We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
Fiberglass reinforcement (GFRP) is made of linear strands of glass fibers, which are collected in the beam reinforced with periodic profile, impregnated with a thermosetting resin binder, then exposed to heat (polymerization) and cooled. It turns a solid rod of high strength three times the strength of steel by tensile test results, and less weight 9 times with equal diameters. Our GFPR rebar is made of epoxy resin and glass fiber direct roving (E-glass). We produce it in coils of 50m, 100m, 150m and 200m or in rods (from 0,5m and up to 12m).
We can produce different lengths 6mm, 12mm, 18mm and 24mm Usage: Glass fiber is suitable for use in waterproof plasters, cement-sand screeds, monolithic filling of external and internal walls, and structural thermal insulation. In industrial and housing construction. Recommended for the production of foam concrete paving slabs, and concrete plates. Ideal for underfloor heating systems.
