Power Selections
38HP Gas
35HP Diesel
25HP 3Ph Electric
Max. Log Diameter 36"
Max. Width of Cut 28"
Wide - 34"
Max. Depth of Cut 10-1/2"
Max. Length of Cut 21'
Max. Length of Cut w/ Bed Extensions 45'
Bed Extensions 6', 12', or 24' Bed Extensions
Max. Log Weight 4,400 lbs
Sawhead Forward/Reverse
High-Output 12V Electric Power Feed
Sawhead Up/Down Electric with Accuset2 Setworks
Side Supports
4 Hydraulic Side Supports
Log Clamps 1 Hydraulic
Bed Leveling Feet 6 Adjustable Outriggers
Trailer Package Standard
Blade Lubrication 5 Gal. Water Tank with Automatic Flow
Overall dimensions mounted: lg 8.1 mx 2, 7 mxh 2m
Built entirely of galvanized steel chroming.
Vertical stroke 1170 mm
Longitudinal slide stroke 7000 mm
Cross slide stroke 1300 mm
Total weight 650 kg (depending on engine)
All movements are ball bearing.
The blade shaft is mounted on two conical roller bearings.
Trolley wheels are easily replaceable steel
380 v three-phase electric motor
Petrol engine briggs & stratton
Safety blade front and rear
Simultaneous vertical displacement of the assembly by a single crank
Accident all items can be replaced or repaired, beams, frames, truck, etc ....
Sawing capacity
Logs: maximum diameter of 1.4 m to 2 m and 6 m length maximum
Timber: 25 cm x 25 cm (26 cm x 26 cm optional)
Quarter sawn: 24 or 26 cm wide
Volume of daily flow: from 6 to 12 cubic meters of wood sciépendant as sawing continues on the other station. It allows to increase the daily capacity by eliminating the time-sawing between two logs.)
A portable sawmill ecopro2® includes:
A sawmill with capacity 25 cm x 25 cm x 6 m
A tilting system (this equipment allows to remove the waste and to position a new log without risk of collision logs / lumber mill in the open position while sawing continues on the other station. It increases daily capacity eliminating the time-sawing between two logs.)
A sharpener (sharpener helps sharpen the saw teeth without removing the blade.) (+ link to the video)
A toolbox
A blade diameter 630 mm
Technical Data K5-320 K5-400
Planer
Max. Planer Width mm 320 400
Work Table Length mm 1560 1920
Max. Planing Thickness mm 4 4
Cutter Shaft Speed R/min 5200 5200
Number Of Cutters 3 3
Cutter Shaft Dia. mm 86 86
El. Motor Power kW 2.2 3
Thicknesser
Max. Planer Width mm 320 400
Work Table Length mm 550 690
Max. Planing Thickness mm 180 220
Max. Planing Heigh mm 3 3
Cutter Shaft Speed R/min 5200 5200
Number Of Cutters 3 3
Feeds m/min 8 8
El. Motor Power kW 2.2 3
Boring Device
Table Dimensions mm 400/250 (500) 400/250 (500)
Longitudinal Travel mm 100 (150) 100 (150)
Cross Travel mm 100 (150) 100 (150)
Vertical Travel mm 100 (150) 100 (150)
Max. Drill Dia. mm 16 16
Drill Speed R/min 5200 5200
Spindel Moulder
Spindle Diameter mm 30 (50) 30 (50)
Spindle Speed R/min. 6000 6000
Vertical Stroke of Spindle mm 130 130
Max.Ttool Diameter mm 170 170
Dimensions Of Worktable mm 850 / 450 850 / 450
El. Motor Power kW 2.2 2.2
Circular Saw
Saw Blade Diameter mm 300 300
Saw Blade Speed R/min. 3700 3700
Max. Depth Of Cut mm 85 85
Dimensions Of Worktable mm 850 / 450 850 / 450
Spindle Dia. mm 30 30
El. Motor Power kW 2.2 2.2 or 3
Tenoning carriage
Dimensions of worktable mm 450/750 450/750
Machine dimensions
Net weight of the machine Kg 540 580
Length mm 1600 2000
Width mm 1140 1700
Height mm 1000 1100
Planer
Plate dimensions400 x 2300 mm
Front plate length 1110 mm
Rear license plate size 1110 mm
Max. Planing length 18 mm
Trench slope angle0-45
Blade qty 4
Top spindle speed 4000 rev / min
Top shaft diameter 105 mm
Saw tray
Plate dimensions 550 x 800 mm
Circular saw blade diameter 350-400 mm
Shaft diameter 30 mm
Tray spindle speed 3600
Drill
Plate dimensions 270 x 480 mm
Longitudinal motion 170 mm
Transversely action 135 mm
Vertical movement 160 mm
Drill diameter 20 mm
Machine
Motor force 4 hp
Dead weight 850 kg.
e equipment was manufactured by Jeffrey Rader AB, Sweden in 1995 and it is in very good operational condition. It consist of two heavy duty rolls with removable profilied surfaces which rotate towards each other and presses overzised wood chips between the profiles. Roll drives 2 x 110 kW / 1500 rpm connected with two gearboxes. Hydraulic pump 7.5 kW, capacity 220 m3/h wood chips.
The equipment was manufactured by Jeffrey Rader Inc, Sweden in year 1995, manufacturers type is DynaYield 80-300 and it is in good operational condition. The Chip Conditioner consists of two heavy duty rolls with removable profiled surfaces. They rotate towards each other and pull the oversize chips between them. The profiled surfaces are aligned so that the pyramid apexes on one roll travel in the valleys of the apexes on the adjacent roll. With normal oversize wood, the Conditioner typically generates less than 1% fines and 3% pins
The normal application for the Chip Conditioner is in a chemical pulping process, processing the oversize materials by fissuring the wood chips parallel with the grain to allow the cooking liquors to penetrate the chip, and allow the oversize chip to cook as an acceptable size chip. Another application is in a thermo-mechanical pulping process (TMP), as a preconditioning
An important feature of this machine is its ability to handle small portions of tramp without going off-line. With the so called Dynagage Conditioner, the dynamic roll is allowed to move away from the static roll, and once the tramp is through the unit, the roll automatically moves back to the proper set point without shutting down the flow and together with slow rotation speed enable were low down time and maintenance costs. Roll distance movements are made with a hydraulic system build on the equipment and controlled by 3 position sensors
More information on requests, for spam protection please introduce yourself properly.
Technical data:
Model: RDY 80-300
Manufacturing year: 1995
Capacity (throughput): 220 m3/h loose wood chips
Press roll diameter: 915 mm
Roll length: 2440 mm
Roll motors: 2 x 110 kW / 1500 rpm / 690 V – 50Hz
Press distance between the rolls: 2.2 mm
Gearboxes: 2 x Kipo Benzler TV 512
Hydraulic pump: Rexroth 200 bar with Mecman syliders
Electric motor for hydraulic pump: ASEA 7.5 kW
Weight: 33 000 kg
Length: 5083 mm
Width: 2550 mm
Height: 2400 mm.
Sliding table saw
Technical data
Fixed table size mm 1580-800
Fixed table size cut mm 1280
Fixed table from floor mm 850
Carriage diemension mm 680
Lateral table saw mm 1150
Vlade arbor diameter mm 30
Max. Depth of cut mm 250
Blade tilting 45'-90'
Max. Depth of cut mm 65
Motor power hp 4
Motor speed rpm 1500-3000
Blade speed rpm 3000-6000
- Control system - Digitally controlled
- Gluing Speed - 24 m/min
- Application Roller - Rubbed With Grooves
- Application Roller Diameter - 200 mm
- Inlet Traction Rubber Rollers - Yes
- Max Working Width - 300 mm
- Working Thickness - From 8 to 20 mm - Adjustable
- Adjustable Glue Application Thickness - Yes
- Dedusting Brushes - Inlet type â?? one brush up + one down
- Brushes Hood Outlet - 2x100 mm
- Total Power - 0.55 kW
- Dimensions - Cc. 585x555x1175 mm
- Weight - Cc. 180 kg
-> Speed Conveyors are controlled wood Carrier (size 130 x 60 cm)
Fhgkkx9sw
-> Adjustable Height Blade (the desired wood shaving thickness can be adjusted)
-> Wood Carrier is Konvi Speed Controls (wood shaving Size is set at the desired figure)
-> Machinery Spare Parts is our standard production can be obtained from anywhere.
-> blower fan
-> Can be used for horse or chicken.
Technicial Specifications
Model : 4 YT - 60
Number of Rollers : 4
Blade Length : 60 cm
Number of Blades : 7 x 4 = 28
Motor Powers : 4 * 7,5 KW = 30 KW -
Total Engine Power : 33 KW
Cutting Setting : 0.5 mm - 2 mm
Machine Weight : 2400 KG
Production Capacity : 900-1250 kg / h
380V- 50 HZ
Drying complex or drying chamber (dryer for firewood, wood dryer) is designed for quick drying of technical wood or fuelwood (firewood with a moisture content
What is the difference between a wood chipper and a wood chipper shredder?
Wood shredder machine are designed specifically to process large pieces of wood, such as branches and logs, into smaller, uniform wood chips. These chips can be used for various applications, including landscaping, composting, or even as fuel. On the other hand, shredders, also known as garden shredders or garden chipper, excel at handling a wider range of materials, including leaves, twigs, and smaller branches. Shredders pulverize the waste into finer pieces, creating a mulch-like consistency that is perfect for composting or as a protective ground cover. While wood chippers are ideal for heavy-duty tasks and larger wood pieces, shredders offer versatility and efficiency when dealing with a broader range of garden waste. A wood chipper and shredder machine will combine the functions of the two in one, which commonly used for efficient landscaping, gardening, composting, or biomass production purposes.
What you can put into a great circle chipper and shredder?
Dive into our collection, and you'll see firsthand. Wood chippers? They're the workhorses, designed to tackle the robust stuff logs, thick branches and break them down into consistently sized wood chips. Whether you're sprucing up your landscape, aiming for prime compost, or looking at fuel sources, these chips have got you covered. Shredders, sometimes labeled as garden shredders or garden chippers, handle the more varied terrain leaves, twigs, the smaller branches. They grind them down into a fine mulch, perfect for composting or as a rugged ground cover. So, if you're navigating through greatcircleus.com thinking where heavy-duty meets versatility, remember: our great circle usa wood chipper manage the bulk, while shredders offer adaptability for various garden challenges. And for those wanting the full arsenal? We ve got hybrid machines that roll both strengths into one. Gear up and get your garden in top shape.
What is the best rated wood chipper for sale?
When it comes to top-tier performance, both electric and gas-powered great circle chipper shredder from our signature brands Landworks, GreatCircleUSA, and SuperHandy stand out in a league of their own. These machines are earning respect from homeowners and professionals alike. Engineered for efficiency, they effortlessly mulch branches and blitz through yard debris, making them the go-to choice for everything from casual yard cleanups to major garden overhauls. Whether you're impressed by the whisper-quiet operation of the electric models or the raw power of the gas variants, you can count on low maintenance and steadfast performance across the board. Their razor-sharp blades paired with a user-centric design ensure that your wood chipping tasks aren't just done, but done right. As you gear up for your next purchase, keep an eye on those standout reviews and ratings especially for our brands. Here, quality isn't just promised; it's delivered.
17 Wood Working Machinery Tools Suppliers
Short on time? Let Wood Working Machinery Tools sellers contact you.
