Motor Power:11 Kw. Reductor motor Output pull out motor power: 1,5 Kw Reductor Brand: Yılmaz Speed Control: 22 Kw Straightening system: Runners and roller system Speed: 0 - 80 cycle speed control (Maximum Speed 2000 m./hr) Requires air supply (4 bars) Highest qualitymotor Strong body structure Separate straightening unit to ensure perfectly straight output Requires only one worker to feed in material. Output is pulled out by automatic motor and rolls Easy adjustments 2 years warranty for mechanical defects Dimension(Length*Width*Height): 180 x200 x140 cm Weight: 2000 kg Roller diameter: 160 x 36 mm. Roller Amount: (4 pieces) rollers for 6x12,12x12, 14x14, 16x16 (4 pieces.) Rollers for 20x5, 20x10, 30x5,30x10,40x5,40x10 Lama (2 pieces.) Double line roller 30x10-5 Lama (2 pieces.) Double line roller 40x10 -5 Lama (1 piece.) Flat roller (4 pieces.)
Engine power: 3 kw System: hydraulic pneumatic End rolling material: 6x12, 10x10, 12x12, 16x8, 20x10, 20x5, 30x10, 30x5 Automatic and manual rolling function with hydraulic pistons Capacity: 500 pieces / 8 hour Dimensions: (length*width*height): 120 x60 x150 cm Weight: 350 kg
Engine power: 3 kw System: hydraulic Capacity: average 2000 pcs/hour. Clamp variations (12, 18, 24, 36) Dimension(length*width*height): 80*70*170 Weight: 400 kg
Engine power: 3 kw System: hydraulic Capacity: 1 piece / second Clamp variations (12.18, 24) Dimension: (length*width*height): 100*70*170 cm Weight: 450 kg
Country of origin: republic of turkey Engine power: 5.5 kw System: reductor engine (40 output) Material: steel material Weight: 500 kg Capacity: average 800 pcs/hour Materials: (6x12 cold), (12x12, 20x5, 30x5, 40x5 hot) Roll diameter: 160 mm Roll width: 100 mm Roll steel quality: 2379 60 hrc hardness Dimensions (length*width*height): 100*80*150 Note: Ultra long molds lifetime High quality steel used for molds
Capacity 8/h 2.250/2.500 pcs.Hollow brick CE-Standard (Certifiled) ADVANTAGES, Robust and aesthetic quality .. It makes production on smooth concrete Onsite watered-site dry Palette does not require You do not need much energy 1 operator with 1 auxiliary elements Practical work ..
Capacity 8/h 1.450 to 1.600 pcs Soil-Brick ( interlock productions ) Standard Brick in size 240 x220x115 mm and weight 10 kg Single pressing with twin hydraulic piston graded Compression power max 8 tons by 250 BAR Easy operating pressure..75 BAR Hyd.Unit 120 lt oil-tanks Pump and walves Bosch-Rexroth Engine power Diesel or Petrol 5.5 HP Cycle 12 to 15 sec. Work system semi-automatic with hydraulic handling Control ON-OFF with directly to give start Mobile machine weight..1.100 kg on steel frame trailer Machine in size (L=2.30 cm W= 1.30 cm H= 1.30 cm
Roll Magnetic Separator is a kind of dry magnetic separator with high intensity, permanent magnet, roll-type. Roll Magnetic Separator is used for enrichment and purification of materials with a grain size of 0.1 to 25 mm and at the low magnetic sensibility. Magnets made from an alloy of rare earth elements used in the production are more powerful as compared. The magnet with this feature and the special magnet sequence on the magnetic roll consists of high gravitational forces. The resulting high magnetic attraction forces make it possible separation with high efficiency magnetic minerals with low magnetic sensitivity and very fine sizes.
In heavy media-based plants and iron ores, magnetic material / ferro silicon improve usually Wet Magnetic Drum Separators are used. These separators by pulling the magnetic material from the product stream, increase product purity and plant productivity. For applications where a high level of purity of the product required; in Wet Magnetic Drum Separator high magnetic field intense models that can separete even very thin and weak magnets from intensive materials are available. In addition, the Wet Magnetic Drum Separators can be used for coal washing and enrichment. Wet Magnetic Drum Separators in current productions with their special design are easily installed without interrupting the production. These machines save energy and work force with their structure of minimum energy consumption and not require work force. Wet Magnetic Drum Separators, according to enriched ore are designed different types of flow.
Eddy Current Separator facilitates the separation of non-ferrous metal ones (diamagnetic), neutral materials (glass, plastic, wood and so on.) and iron components from waste materials namely 3 different materials in completely separate containers. It is a type of separator that allows the minimization of environmental damage by giving diamagnetic materials that industrial waste
It is used for deferrization of ceramic raw materials and industrial raw materials, operation of ore enrichment also be used. In addition, it is used for cleaning of high-quality quartz, magnesite enrichment, evaluation of the beach or mineral sands,cleaning of limestone dolomite, cleaning of foundry sands, cleaning of refrakter raw material, enrichment of boron, enrichment of chromite, bauxite, feldspar cleaning, clay cleaning, glass sand cleaning.
Material is poured into magnetic drums. Non-magnetic parts spills down from the middle section not being affected by the magnetic field. Magnetic parts are kept by the magnetic field force into the drums and trown out on the both sides of chute that the magnetic field ends.
Capacity 8/h 2.800 to 3.000 pcs Soil-Brick (Standard productions) Standard Brick in size 240x220x 115 mm brick weight 10 kg Double pressing with twin hydraulic pistons graded Compression power max. 15 tons by 250 BAR Easy operating pressure..75 BAR Hyd.Unit 170 lt double oil-tanks Pump and walves Bosch-Rexroth Engine power Diesel or Petrol 10 HP Cycle 10 to 12 sec. Control ON-OFF with directly to give start Work system semi-automatic with hydraulic handling Patterns within the frame-mounted from speciall steel Feeding to into mould by bucket Flat masa for rest of stock front side Machine about weight..1.500 kg on steel frame trailer Machine dimension (L=2.30 cm W= 1.90 cm H= 1.70 cm
Homogenizers are designed to lyse the particles in food products (oil and protein particles) to acquire a homogenized end-product. These units are most commonly used in milk, cream and yoghurt facilites. Homogenization application enhances consumption features, quality and shelf life of the products while also increasing the production output. Capacity: 1500-10000 lt/h
Lakto-ak cluster designed for high yielding cows. Main target on design is minimizing the vacuum fluctuation at teat end, thus accomplished by large claw volume “490 cc” and large liner-claw connection diameter. The inner diameter of the connection to claw 14 mm transfers the milk from liner and the teat immediately to the claw in order to eliminate physical pumping of the milk back in to teat during massage phase. Thanks to patent pending heterogenic design of the liner walls thus starts collapsing from teat top to teat end consecutively, just like hand milking or a suckling calf. Ergonomically designed claw fits perfectly in hand that helps milker for easy attachment or detachment of the cluster. All these features helps for an easy, healthy milking; with the help of lakto-puls pulsators significant yield improvement and remarkable somatic cell count drop should be expected right after start using lakto-ak clusters.
Lakto-puls pulsator has a very simple design that can fit all brands. Provides perfect milking quality, doesn’t influenced by environmental temperature or vacuum level. Due to indirect valve control by pilot valves, enables using low powered coils (only 0, 11 amps.) and design on cooling effect of the air intake on the coils prevents disorder on pulsation even on long runs due to overheating. Lakto-puls2 can milk two clusters at a time for economical pulsation requirements. Central pulsation controlling unit controls up to 16 pulsators. Pulsation rate and ratio can be adjusted according to farmer and animal needs and displayed on lcd display. Controller has cascade ability for reducing the vacuum fluctuation in the milking system due to pulsators. The pulsation controller powered by external switch mode power supplier for protecting the pcb from voltage fluctuations that may happen at network.
It is completely hot dip galvanized. On the application area, it can be installed to the roof trusses with chain, easily. Polluted air is removed through the air corridor created inside the barn or in the milking parlor waiting area. High capacity can be reached by low power consumption and low rpm. This low rpm (340 rpm) also decreases fan blade noise. It is located with intervals of 18-22 meters when min air speed is 3 meters/sec. Fan performance table: Motor power Blade angle Capacity 1, 1 kw 32º 77.300 m³/hour 1, 5 kw 36º 89.500 m³/hour 2, 2 kw 39º 98.000 m³/hour 3 kw 43 º 110.000 m³/hour
Portable manure pump that can be driven by a tractor or electrical motor equipped with a special rubber rotor. It is able to pump manure and liquids containing high dry matters up to 5 bars. Type Drive type Pressure – Max Capacity – approximately G120t Power take off- pto 5 bars 70 m³/hour G240t Power take off- pto 5 bars 140 m³/hour G120e 7, 5 kw, 3x380 volts-50hz electric motor 3 bars 50 m³/hour G120e 11 kw, 3x380 volts-50hz electric motor 3 bars 68 m³/hour G240e 15 kw, 3x380 volts-50hz electric motor 3 bars 111 m³/hour G240e 22 kw, 3x380 volts-50hz electric motor 3 bars 140 m³/hour The stone catcher supplied as standard part of the pump protects the pump body and the rotors from the stone or metallic matters.
Lakto-pak jetters are designed for heavy duty conditions and for industrial parlors. Swinging mechanism prevents the jetter cups from dirt during milking.
Og cip automatic washing unit controls the entire milking system via preprogramed plc. Addition to og-cip1, the user can create own washing cycles, add or remove wash steps etc. Large lcd display shows every step during operation and settings. Starting up the system is much easy as all the time settings can be entered by alpha-numeric key board. The service is very easy, all the services can be checked during milking, thus allows service man to provide maintenance to all out puts/services connected to og-cip2 during milking, this allows less time for technician for maintenance.
