Portable manure pump that can be driven by a tractor or electrical motor equipped with a special rubber rotor. It is able to pump manure and liquids containing high dry matters up to 5 bars.
Type Drive type Pressure –
Max Capacity – approximately
G120t Power take off- pto 5 bars 70 m³/hour
G240t Power take off- pto 5 bars 140 m³/hour
G120e 7, 5 kw, 3x380 volts-50hz electric motor 3 bars 50 m³/hour
G120e 11 kw, 3x380 volts-50hz electric motor 3 bars 68 m³/hour
G240e 15 kw, 3x380 volts-50hz electric motor 3 bars 111 m³/hour
G240e 22 kw, 3x380 volts-50hz electric motor 3 bars 140 m³/hour
The stone catcher supplied as standard part of the pump protects the pump body and the rotors from the stone or metallic matters.
Supplier: Manure pump, fish pond pump
Supplier: Sludge pumps 1440 rpm for etp and piling columns, non clog semi sludge pumps for sewage treatment, chopper pumps for bio processing of manure, chemical process pumps for chemical pumping, solar range of submersible pumps in v4 and v6 design, dewatering pumps for rain water removal and oily water pumping.
Services: manufacturer
Progressive Cavity Pump is a type of positive displacement pump which has a rotor rotating within a housing called a stator. The rotor is always metallic and the stator is made up of a rubber type of material. It looks somewhat like a screw thread the fluid is between the cavities and the rotary motion of the rotor forces the fluid through from one end to the other. The liquid acts as the lubricant between the pumping elements,� and it should not be run dry. What are progressive cavity pumps used for? � They are helpful in applications of metering and dosing, industrial wastewater, flurries, crude oil, and other similar applications: 1.Petroleum and Natural Gas Industry: It can be used for crude oil transportation, multi phase transportation, drilling sludge transportation, oil-water separation, oil tank cleaning, polymer transportation, etc. 2.Paper Making Industry: It is used for raw material processing, pulp preparation, black liquor and various coatings and auxiliary chemicals industry, etc. 3.Mining Industry: It is used for coal water slurry, ore slurry, bentonite transportation, liquid explosive transportation, coagulant addition, etc. 4.Chemical Industry: Chemical fiber transportation, PP / PE catalyst transportation, coagulant preparation, transportation of various chemicals, etc. 5.Food Industry: Dairy Milk transportation, beverage preparation, dipping preparation, wine preparation, meat transportation, dough transportation, chocolate preparation, etc. 6.Construction Industry: Concrete, building additives, etc. 7.Environmental Protection Industry: Sewage, sludge treatment, coagulant transportation, dry sludge transportation, activated carbon dosing, lime milk transportation, other chemical agent transportation, etc. 8.Biogas Industry: Biogas transportation, biogas slurry mixing, animal manure, kitchen waste, plant straw, etc. 9.Shipbuilding and marine sewage transportation, oil-water separation, mud transportation, etc.
Flow: 10m3/h Head: 10m Power: 0.75kw Material: cast iron Medium: clean water Outlet dia: 50mm Speed: 2900r/min Voltage: 380V Phase: 3 phase/50Hz Color: Yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries
Flow: 35m3/h Head: 5m Power: 0.75kw Material: cast iron Outlet dia: 80mm Speed: 2900r/min Voltage: 380V Phase: 3 phase/50Hz Color: Yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries
Lakto-ak cluster designed for high yielding cows. Main target on design is minimizing the vacuum fluctuation at teat end, thus accomplished by large claw volume “490 cc” and large liner-claw connection diameter. The inner diameter of the connection to claw 14 mm transfers the milk from liner and the teat immediately to the claw in order to eliminate physical pumping of the milk back in to teat during massage phase. Thanks to patent pending heterogenic design of the liner walls thus starts collapsing from teat top to teat end consecutively, just like hand milking or a suckling calf. Ergonomically designed claw fits perfectly in hand that helps milker for easy attachment or detachment of the cluster. All these features helps for an easy, healthy milking; with the help of lakto-puls pulsators significant yield improvement and remarkable somatic cell count drop should be expected right after start using lakto-ak clusters.
Good price cow dung dewatering machine pig manure dewater machine for sale Product Description Equipment Introduction Screw press solid liquid separator is mainly consist of motor,reducer,screen,screw,pipe,pump, control cabinet.It is widely use in farm,especially for manure dewatering for cow,pig,horse,chicken,etc. Spiral extrusion type solid-liquid separator is a new mechanical dewatering equipment developed by our company by referring to various advanced dewatering equipment at home and abroad and combining with our own dewatering equipment and manufacturing experience.Spiral extruding solid-liquid separator is mainly composed of control cabinet, pipeline, body, screen, extruding jiaolong, reduction motor, counterweight, unloading device and other parts, this equipment is widely used, and has been recognized by the majority of users in the market. Working Principle The principle of solid-liquid separator is spiral extrusion solid-liquid separation technology.The main components are: body, screen, extrusion and stranding, reduction motor, unloading device and other components. After the cutting feed pump pumps the mixture to the solid-liquid separator through the pipeline, the separator starts, and the mixture is gradually pushed forward to the front of the body by squeezing the stringer. At the same time, the pressure of the leading edge is constantlyincreased, forcing the water in the material to extrude the screen and flow out of the drain pipe.The work of the extruder is continuous, the material is continuously pumped into the body, the leading edge of the pressure is increasing, when to a certain extent, the discharge port will be opened, extrusion extrusion port, to achieve the purpose of extrusion.In order to grasp the speed and water content of the discharge, the control device in front of the main engine can be adjusted to achieve a satisfactory and appropriate discharge state. Features 1.With 304stainless steel cover,which is easy to take off and observe. 2.Screw and screen adopt high quality 304SUS,Which is preservative,can use long time. 3.Easy operate,small dimension,low noise,work stable. 4.Low moisture content after press,you can't press out water by hand.After press the moisture content is around 60%,of course it is not water weight 60%. 5.Screw is full welding,which is more durable.
The rabbit manure organic fertilizer production line is complete set of equipment for organic fertilizer, which makes use of rabbit manure as raw materials. First the rabbit manure in the excrement can be pumped into the equipment by sludge pump. Then the materials are dehydrated by dewatering equipment with some 40% of water content. The straw, rice chaff( contain N\P\K) and other crops can be used as packing material. Then add biological bacterium agent to the material. Mix 1 kg of bacterial agents with 20 kg of water into the materials, then 1 ton of raw material can be fermented. Once fermentation with 1 to 2 days. The materials can be thoroughly decomposed in 7 to 10 days.
The horse manure organic fertilizer production line is complete set of equipment for organic fertilizer, which makes use of horse manure as raw materials. First the horse manure in the excrement can be pumped into the equipment by sludge pump. Then the materials are dehydrated by dewatering equipment with some 40% of water content. The straw, rice chaff( contain N\P\K) and other crops can be used as packing material. Then add biological bacterium agent to the material. Mix 1 kg of bacterial agents with 20 kg of water into the materials, then 1 ton of raw material can be fermented. Once fermentation with 1 to 2 days. The materials can be thoroughly decomposed in 7 to 10 days.