Classic Pergola (VENUS PERGOLA) The Venus Pergola is made of special high tenacity aluminum alloy. Produced by electrostatic painting. Produced from different construction carrier, resistant to adverse weather conditions. This is the awning system that makes available areas in winter conditions. TECHNICAL DETAILS German Becker or Somfy Motor Inox construction and connection screws. Black-out resistant and water repellent for all weather conditions Advanced Mehler brand surface material consists of PVC block. Durability wind 90km/h and durability snow height average 30cm. Aluminum rail thickness 145x100cm. Backfurrow size 150x175cm. Dolumn rail thickness 100x160cm. Width range from 300sm to 1100sm, Projection range from 300sm to 1100sm All products have different types, sizes, colors. For more information on our company and products, please feel free to contact our International Sales Team.
Ideal solution for strip cutting from tubular fabric. Standart triple strip cut. (optionally increasable) Cutting different sizes at the same time with adjustable knives. Adjustable diameter of strip rolls. Automatically stop after reaching the required diameter. Save space with 1m2 working area. Easy movement with directional wheels Speed control Low power consumption. Easy maintenance.
Coal Packing Plant
External Fixation Systems consist of various components used to build constructs to treat the indications listed below. External Fixation Systems are modular, therefore, different frame configurations are possible. An individualized configuration should be designed for each case to suit the specific application. All External Fixation System components are for single use only. Each External Fixation System is designed as a system and does not allow the substitution of components from other systems.External Fixation Systems are made from aluminium and stainless steel. It utilizes circular frame and half-pin fixation techniques and procedures for placement of the device. The device is intended to be centered on the axis of rotation. The device allows some adjustability to permit adjustment on the axis.
The mortar mixing machine is a machine that mixes and thicken the acrylic mortar used in the production of 1000 kg jambs.
Bevelling machine 10 wheels as is With washer Min. Dim.: 110x110 mm (40x40 with special device) Thickness: from 3 to 25 mm
Chocolate Coating Machine QUALTY : All parts of the machine are produced from 304 qualty stainless steel materials SYSTEM : The drum system. Push-up roller mixer. Speed control.Control panel. Chocolate thinning fan. Wire tape up to 40 cm POWER : Wire tape 0,75 kW mixer 1,1 kW output transfer drum 0,75 kW DIMENSION : Width 99 cm - Height 108 cm - Length 120 cm WEIGHT : 270 kg CAPACITY : 100 kg
CVS Fuel Protection Systems is produced for prevent fuel theft 100% protection Commercial vehicles mainly working with diesel and gasoline (truck, bus, minibus,midibus, Construction Machinery, generator, motorcycle, Yacht, Boat, etc.) products and systems that prevent diesel theft from vehicle groups.
Automatic stretch blow molding machine APF - 30 to produce PET bottles. Output - 250 bph. Bottle volume - 10.0 - 30.0 L
Automatic stretch blow molding machine APF - 3002 to produce PET bottles. Output - 3000 bph. Bottle volume - 0.2 - 2.0 L
Automatic stretch blow molding machine APF - 6004 to produce PET bottles. Output - 6000 bph. Bottle volume - 0.2 - 2.0 L
Semi automatic stretch blow molding machine APF - 5 to produce PET bottles. Output - for bottle volume 0,2- 3,0 l, bottles/h - 600-800 for bottle volume 5,0 - 6,0 l, bottles/h - 300-350 Bottle volume - 0.2 - 6.0 L
PET Technologies has developed equipment to pack empty PET bottles in plastic bags. The rows of up to 2 L PET bottles can have both chessboard and direct configuration. -Wide range of bottles volumes and dimensions to pack; -Options to push PET bottles into the bag automatically and seal it minimize operators intervention in the machine; -Bag quick fixation system to reduce packing time significantly; Simple equipment operation guarantees empty bottles packing process stability with low investments. This is a perfect supplement for empty PET bottles blow molding line with output 1000 - 3000 bph, in particular, with automatic blow molding machine APF-3002. Output, bph 1000 - 3000 Bottle volume, l 0.3-2.0 Air pressure, bar 6-8 Bottle height range, mm 160-350 Bottle diameter range, mm 60-110 Packing table width, mm 600-1000 Packing table length, mm 1600 Outfeed table dimensions, mm 1000x1260
Automatic stretch blow molding machine APF - 10 to produce PET bottles. Output - 2500 bph. Bottle volume - 3.0 - 10.0 L
It is possible to make stick sugar from granulated sugar by using the machine which is produced by the best-quality materials. It is easy-to-use and produced basing on the standards like cleaning and maintenance. Product statement and capacity information can be acquired by commanding the PLC system. Gold Paketleme Makina GIda San. ve DIS Tic A . is producing the GST-100 Stick Sugar Packaging Machine over 10 years of experience. The paper which was produced with poly-ethylen method, comes printed from the press with the width of 200 mm and weight of 50+15 gr and 70+15 gr, is attached to the machines bobbin attaching section. The paper on the bobbin is transferred to the 4-Blade section in a controlled way by the help of pulleys. In the blade section, the paper with the 40mm width is divided into 5 equal pieces, then transferred to the collar and pillow section. In this section, papers pass on the channels on pillow and wrap around the pipes which the crystal sugar is transferred. The sides of these wrapped paper, are sealed vertically(rigidly) from the back section in the form of A+A, by means of the resistances inside the vertical jaw(rigid claw). After the sealing process, made by the help of vertical jaw, the granulated suga which is on the top side of the machines sugar tank, is transferred into the sealed paper, which can take 1-10 grams, by the help of piston mechanism. The bottom claw group is cutting the length of the packs equally by sealing bottom and top side of the stick packs according to the photocell point on the paper. The stick sugars which were packed and cut, are transferred on the output conveyor for packing. Also, it is possible to make production different than the standard stick sugar pack dimensions. The amount of sugar, to be produced according to the consumer needs, is entered on screen and this provides the machine to stop automatically when the production finishes. The PLC control system is used in this machine. The operating speed of the system can be easily controlled according to the production capacity.
Why RYD-S? Because Renas RYD-S series liquid filling machines are; more hygienic, faster, more precise than primitive methods such as filling using barrels, kegs and taps; and it requires less workmenship. The fillings you perform are much more professional. What Are The Advantages? Some distinctive properties of Renas RYD-S series liquid filling machines which separates it from similar machines are as follows; Easy To Clean Flange Ferrule System; Thanks to the easy to clean flange ferrule system found on the connecting parts of RYD-S, the product contact surfaces can be demounted and cleaned within a few minutes without requiring and keys or technical equipment. Thanks to this, you never have any trouble with your production regarding hygiene. Anti Bacterial Joints And O-Rings; RYD-S is manufactured using anti bacterial silicone materials with parts such as all joints, o-rings, seals whether located on points which come into contact with the product or not, thanks to this feature, you can ensure maximum hygiene requirements and manufacture in accordance with the GMP conditions. Sensitive dosing Mechanism; Thanks to the sensitive dosing lever with a 0,5 mm pitch interval located on RYD-S, in enables you to work with minimum deviation in various filling intervals, using a single machine. As long as you do not change the dosing setting, it always works with the same measures. Emergency Button; Thanks to the emergency button located on RYD-S, notwithstanding whichever position the machine is in, it retracts the piston and makes it secure. RYD-S is in accordance with the occupational safety law no. 6331. Additional modifications are not required to ensure compliance with the law. Hose Suction System ; By connecting to the reservoir and to the tank drains with clamps, RYD-S can also perform suction from sources such as bins, buckets or jugs using the immersion method. It does not require you to bring the product to the opening of the machine. It also minimizes the time losses by performing the initial suction itself. Automatic and Manual Mode; RYD-S can operate in two different modes according to the speed and the form of your production. Thanks to the pedal switch which comes free with the machine, you can operate the machine in the manual or the automatic mode with time adjustment. Particularly with your serial productions, it automatically works without requiring you to press the pedal. Drip preventing Nozzle ; Thanks to the drip preventing nozzle system, RDY-S does not drip after the filling and the bottles you fill never gets dirty, no wastes occur due to dripping. Honed Product Suction Piston ; RYD-S reduces the loss of filling to a minimum by making very precise dosing even at high weights thanks to the honed product suction piston which is not featured in similar machines. Piston seals have a long service life thanks to their smooth piston surfaces. It does not damage the piston seals in a short time like similar machines... Internal Conditioner and Slide Valve; Thanks to the internal conditioner featured on RDY-S, the machine is protected against water and corrosion damages which may occur in the ventilation installation and which can harm the pneumatic system of the machine. Thanks to the slide valve located on the air opening of the machine, without requiring a separate valve, you can cut the air from the system when your work is done. Other Features Machine Chassis: The chassis or the machine and all metal surfaces are manufactured using SUS 304 Stainless steel. Tee, Clamp and Flange parts of the machine are manufactured using SUS 316 Stainless steel. Electrical System: The body of the machine is protected against all electrical threats thanks to the grounded chassis. Electro Pneumatic System: Thanks to its electro pneumatic system, RDY-S performs more precise dosings and reduces your loss of production to a minimum. Optional Properties 1) RDY-S surfaces which come into contact with the Product, can be manufactured using SUS 316 or different materials according to your needs. 2) RDY-S can be manufactured to enable filling products at high temperatures. 3) For products such as milk, ayran etc. which foam during fast fillings, to increase your production speed, an integrated nozzle which ascends and descends during filling can be added. 4) It can be manufactured as sensor triggered, if it is required on the Filling Line. 5) As per request, a counter showing the number of fillings made can be added. Products It Can Fill; For example: Fruit juice, water, turnip juice, shampoo at low viscosity, liquid soap, bleach, milk, all liquid oil and mineral oil types, medicine and syrups, thinner, liquid paints etc. all liquids with low viscosity, suitable for suction. We can perform trial fillings for your products expect colorant products or products which cause permanent damage. RYD- S2 Double Nozzle Filling Machine RYD - S2, in addition to all features on RYD - S series, enables you to perform fillings for two products at the same time. If you want, you may produce two different products in two different basis weights with a single machine. Despite having the features of two machines, it is cheaper compared to two separate machines. Production Information and Deadline Production Information: RYD - S is being manufactured on our factory located in Turkey. Our compant manufactures RYD - S series liquid filling machines with standart filling intervals mostly with stocks. You don't have to lose any time with waiting periods after making your decision. Special Productions: Aside from the standard filling intervals, RDY-S can be manufactured for different filling intervals required for your needs. For the non-standard production, the delivery deadline is between 5 to 20 days. The filling orifices located on the filling nozzles can be manufactured in different sizes according to your needs. In cases where you need to operate with 110V or different voltages, the machine can be manufactured according to your needs. Other Comments: Packaging: Our machine packaging is performed to enable delivery to long distance destinations. Transportation: We can deliver your product with our contracted courier company with very reasonable prices. If you wish, we can deliver it using your contracted warehouse or courier. Warranty: Our machine is warranted for a period of 1 year against manufacturing faults. GENERAL PROPERTIES Surfaces 304 Stainless Power Consumption 250 Watt Energy The Products Which The Machine Can Fill: Drinking Water, Fruit Juice, Lemonade, Sports Drinks,Energy Drinks, Pickle Juice, Turnip Juice, Milk, Ayran, Vinegar, Sunflower Seed Oil, Vegetable Oils, Shampoo, Hair Care Oil, Massage Oil.
Technical characteristics * works with pneumatic system. * primes the product from its’ 80 lt. Stainless steel hopper above. * interchangeable nozzle with a code of vns03 for the products with particles inside up to 30 mm diameter like jam, american salad etc. * there is a heigth adjustable platform on the filler to place the packages during the filling process. * the machine is exproof system. * the seals are manufactured from teflon , viton or polyethylene according to the product to be filled. * the parts on the machine are connected by tri –clamps. *the nozzle, main valve and the filling piston are designed for an easy-cleaning .They can be dismantled easily without using any tool. * high surface smoothness and argon arc welding technology prevents bacteria growth. *the machine stands on a stainless steel frame which is supprted by 4 castors, it can be easily move to anywhere. * easy to adjust and record the filling range by the numerator and the hand wheels. * a detailed instruction manual for each model is available. Number of cylinders: 1 Filling range: min:50 ml - max:500 ml Capacity : 1000 packages/hour Materials used on the filler * the parts that contact with the product are 316 l stainless steel. The other parts are aluminium and 304 l stainless steel. Operating temperature : +5º - +90º Filling accuracy : ± %1
Technical specifications * works with pneumatic system. * primes the product from its’ 80 lt. Stainless steel hopper above. * interchangeable nozzle with a code of vns03 for the products with particles inside up to 30 mm diameter like jam, american salad etc. * there is a heigth adjustable platform on the filler to place the packages during the filling process. * the machine is exproof system. * the seals are manufactured from teflon , viton or polyethylene according to the product to be filled. * the parts on the machine are connected by tri –clamps. *the nozzle, main valve and the filling piston are designed for an easy-cleaning .They can be dismantled easily without using any tool. * high surface smoothness and argon arc welding technology prevents bacteria growth. *the machine stands on a stainless steel frame which is supprted by 4 castors, it can be easily move to anywhere. * easy to adjust and record the filling range by the numerator and the hand wheels. * a detailed instruction manual for each model is available. Number of cylinders: 1 Filling range: min:50 ml - max:500 ml Capacity : 1000 packages/hour Materials used on the filler * the parts that contact with the product are 316 l stainless steel. The other parts are aluminium and 304 l stainless steel. Operating temperature : +5º - +90º Filling accuracy : ± %1
Machine that impregnates the wood with the combined action of vacuum and pressure. Highest grade of preservation: this model is especially recommended for the preservation of wood products that are in contact with the ground and salt water.
Machine that dryes the wood with the combined action of high Levels of vacuum and heating plates. With this model you can get the fastest drying rates and Highest drying uniformity. It is especially recommended for the drying of semifinished wood products.
