Two tier Galvanized double deck bike rack/bicycle rack For all types of bicycles 2 tier bike rack can accommodate all types of bicycles, such as mountain bikes and town bikes, and any bicycles can also be chained for extra security. Once placed, the bicycle is well supported by wheel channels and the back wheel is stabilised by a gutter to lock the bicycle firmly. The lower rack has a sloping wheel channel, so the user does not have to bend between the levels which makes the cycle parking system simple and easy to use for all ages. This 2 tier bicycle rack is excellent for space saving as the cycle stands are compact with a centre to centre distance of around 370 mm. There is also the option to have the powder coated in any of the 192 RAL colours. Double deck bicycle rack features: 1.This double deck bicycle rack can park 2 bikes per set(one up, one down). 2.assembled in underground garage. 3.used for public place such as hosipital, school etc. 4.beautify the environment. 5.can Save space and prevention of theft.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Rattan is a type of climbing palm that is very long with a slender stem which maintains an almost uniform diameter throughout its length. It grows in a manner similar to a vine, but has an inner core and is not hollow like bamboo. The outer portion of the stem is extremely hard and durable, while the inner portion of the stem is softer and porous. The shade in the rain forests is very dense and climbing on tree limbs is the most practical way for the rattan vines to reach the light above the forest canopy. This makes Rattan ideal for continuous strips of reed and it is considered to be one of the strongest woods available ideal for weaving.
RATTAN NATURAL CORE Rattan is a type of climbing palm that is very long with a slender stem which maintains an almost uniform diameter throughout its length. It grows in a manner similar to a vine, but has an inner core and is not hollow like bamboo. The outer portion of the stem is extremely hard and durable, while the inner portion of the stem is softer and porous. The shade in the rain forests is very dense and climbing on tree limbs is the most practical way for the rattan vines to reach the light above the forest canopy. This makes Rattan ideal for continuous strips of reed and it is considered to be one of the strongest woods available ideal for weaving. The straight rattan is usually steamed and then bent into the desired shape through the use of specialized shapers. Once the rattan has dried, it will retain its shape forever. These rattan poles are often used to form the frames of what will become rattan/ wicker/ woven conservatory furniture such as chairs, tables and sofas. Rattan is incredibly durable and can withstand extreme heat without splitting or drying out so is the ideal solution in conservatories.