Chocolate Coating Machine

PNC Chocolate Coating Machine QUALTY : All parts of the machine are produced from 304 qualty stainless steel materials SYSTEM : Electronic materials Panasonic & Simens Chocolate is on the tranfer Drum system Control panel pnc display , Movement reducer POWER : Wire tape 0,75 kW mixer 1,1 kW output transfer drum 0,75 kW DIMENSION : Width1 mt - Height 150 cm - Length 7 mt WEIGHT : 950 kg CAPACITY : 250 kg/h

You can position the top coating unit both horizontally and vertically to achieve a perfect coating process. You can coat all, half or only the bottom and edges of your product. It is designed for perfect coating over the entire belt width with calibrated blowing fan, base stripping shafts, precise top and bottom coating units. The lower coating unit is water-walled and circulates precisely tempered water. The blowing fan is equipped with a speed controller, heater and cooler unit and can be adjusted as desired regardless of the outside temperature. The special mixer of the chocolate bowl is surface refreshing and ensures that your chocolate always remains the same. The laser sensor adjusts the chocolate level precisely. There is an additional chocolate pump for cleaning or for discharging tempered chocolate. During its design, all surfaces that may cause contamination have been minimized to ensure optimum hygiene conditions. The deburring unit not only works very effectively with its slim design, but can also be dismantled in minutes. Optionally, it can also be supplied with flavor coating, temper breaker, biscuit reversing and top pressing device, wave and line decorating machines, additional hood.

Xm65/25 plastic extruder 1. The application of the equipment: For the production of plastic extrusion. : the material of pvc, ldpe, xlpe, lshf, tpu ext. 2. Technical parameters 1) production scope: the diameter of the conductor: 1-10mm Finished diameter size: 2.5-13mm 2) extrusion capacity: max 80kg/hr 3) motor power: 15kw(frequency conversion) 4) heating power: 16kw(three section heating with air cooler) 5) center height of the machine: 1000 mm 6) pay-off spool specification: diameter 630mm(pn 400-630mm) 7) take-up spool specification: diameter 630mm(double spool) 3. Composition of the equipment 1) 630mm no-spool pay-off 2) elevating tension straightening machine 3) sj65 extruder with auto feeding. 4) water cooling sink 5) dry-printing device 6) diameter measure device 7) 600 mm/ 350mm wheel traction machine 8) 630mm double spool take-up machine 9) control box Standard package.

Coated Paper Coating Machine Application: Used in conversion coating of coated paper, single-sided or double-sided coating. Technical Parameters: Basis Weight: 48-120 g/? Speed:100-450m/min Net Width:1092-2400m/m Capacity:10-100t/d Structure and Characteristics: 1. Unroll(Automatic paster)+Scraper+ Suspension dryer+Scraper(back)+ Suspension dryer+Towing cylinder+ Scraper+ Suspension dryer +Scraper(back)+ Suspension dryer+ Horizontal paper winding machine. Finishing Section: 1.Supercalender 2.High-speed slitting machine 3.Re-reeling machine 4.Paper cutting machine Coating Preparation Part: 1.High-speed dispersion tank 2.Degelatinize tank, 3.Dispensing tank 4.Electric motor tank 5.Vibrating screen. Transmission Part: 1.Fractional driving with Frequency control. 2.Hard-teeth reduction gear.

Supplier: Customize CNC machine parts, bent, 3D printing etc, Customize finishing, eg: Anodize, paint, passivate, each kinds of heat treatment etc.
Services:

1600/100 box board coating machine is suitable for kraft paper, box board paper, suitable paper for 100 ~ 250g/m2 of all kinds of original paper. Main technical parameters of 1600mm / 100 box sheet paper 1. Production varieties: carton board paper, kraft paper, 2. Quantity of original paper: 100-250 g/m2 3. Quantitative paper: 150-300 g/m2 4. Width of original paper: 1650mm 5. Net paper width: 1600mm 6. Design speed: 100m/min 7. Work speed: 50-80m/min 8. Nominal output: 25 days/ton 9, theoretical yield: 26.8 t/d (according to the 200 g / ã?¡ - 20-70 - m/h/d min26.8 tons) 10. Coating form: air knife + scraper 11. Cloth quantity: (max) 10 -- 30g/m squared 12. Coating solid content: (max) 62% 13. Steam heating: 0.7mpa 14, drying oven working temperature: 140 â?? 15. Paper method: manual manual 16. Electric control mode: ac frequency conversion transmission 17. The drying oven temperature is adjusted by manual control. Refund paper coating machine by the hydraulic frame, air knife, scraper, hot air drying oven, hot air system, frame, the seasoning cylinder, soft calender, cold roll, roll machine, driving system, frequency converter, frequency conversion cabinet, electrical work station system composition and so on.

Supplier: Metal, stamping, cnc machining, metal coating
Services:

1. Product information Product: Electrostatic Powder Coating Machine Moodel : RY-M101 Input volate: 220V/50HZ or 110V/50HZ (customized) Application: Normal products powder coating Output voltae: 0~100kV Output current: 0~150A Protection grade: IP-54

This production line adopts polyethylene (PE) material extrusion machine for film coating. The PE material is absorbed to material canister by automatic drying and material absorbing device. Then the material would be melted, after filter, the melted PE is distributed evenly onto the T shape mould. And finally it can be coated onto base material evenly. Features: This is the advance model of PE coating machine. It has multi-extrusion mould, multi- working station, The coating and compouding can be done by one step. Our machine are using Siemens PLC for easy setting and operation, all parameter can be set by the touch screen.