CKM Defense Hydraulic Road Blocker is the most widely used system in areas where entry and exit should be controlled and safe against all kinds of vehicle attacks, such as military facilities, government buildings, embassies, production facilities, oil refineries, hotels, airports, and stadiums.
The system is specifically designed against vehicle impacts, and its components have been reinforced to be effective in all possible attack scenarios.
Thanks to its hydraulic operating system, the CKM Defense Road Blocker System works continuously even in the busiest places. Additionally, CKM Defense Security Road blocker crash tested and certified for IWA 14-1:2013 / PAS 68 (K1) with anti-terror capability.
This system synchronizes with other security systems such as swing barriers, rising bollards, etc., keeping the defense at the highest level in case of attack, while allowing authorized vehicles to safely enter the area. It can be integrated with all kinds of Access Control Systems such as Plate Recognition Systems, HGS (Electronic Toll Collection-Fast Pass) Systems, Card Readers.
CERTIFIED (WITH CRASH TEST) TECHNICAL FEATURES
IWA 14-1:2013 (N3D) / PAS 68-P1 Certificate (Under conditions of 12,375 kg vehicle with 80.9 km/h speed and 0.64 m penetration)
Power: 380 VAC, 3-Phase, 50/60 Hz
Length: 2111�±20 mm / 3111 mm �±20 mm / 4111 mm �±20 mm / 5111 mm �±20 mm / 6111 mm �±20 mm
Height: 2950 mm �±20 mm
Above-ground height: 1100 mm �±20 mm
Under-ground part: 1350 mm �±20 mm
Width: 1550 mm 20 mm
Color-Paint: Yellow-Black (May be painted in different colors)
Collision Unit: Steel sheet and NPU NPI steel bar construction
Number of pistons: Double
Wall thickness (Top part): 10 mm
Wall thickness (front & side sheets): 6 mm
Surface coating: Electrostatic paint
Protection class: Sanding, primer surface paint
Operating Time: 8-10 seconds
Operating Capacity: 1000 times/day
Engine Power: 5.5 kw, 380 VAC, 3-Phase
Crash Level (Certified with crash test): IWA14-1 (PAS68, K12)-P1 crash rated
Operating Temperature: -25 / 50�°C
Operation Type: Hydraulic system
Automation: 220 V two-way solenoid valve
Hydraulic pressure: 80-120 Bars
Hydraulic tank: 40 Lt
An Amphibious Excavator is specially designed to work in swampy, wet land and shallow water. Our well designed Amphibious Undercarriages provides great mobility to work on soft terrains and swampy area.
Standard package of Amphibious Excavator is attached with long reach arm c/w conventional excavator bucket.
Amphibious Undercarriage has proven to work effectively on the following areas:
1) Swamp land clearing at mining, plantation and construction area.
2) Deepening of canal, river channel and river mouth.
3) Building bund for flood prevention and land reclamation.
4) Building bund wall for fish, shrimp ponds and salt making industry.
5) Clearing of lakes, ponds and water reservoir.
6) Digging trenches for oil & gas piping installation.
7) Clearing obstacles at landslide and flood hit area.
8) Water irrigation at paddy field and plantation.
Concrete recycling systems are capable of separating unused concrete into its original aggregate and grey water. The separated aggregate can be reused for future mixing and even recycled or separated from the gray water.
Contact Us Contact UDO to find the ideal concrete recycling solution for you.
Benefits
Fast return on investment
Excellent solid-liquid separation and washing of aggregates
Lower maintenance costs for end users
Low operating costs (low water and energy consumption)
Action
Solid aggregate particles (sand and gravel) larger than 0.3 mm (0.01 inch) in size are separated from the wastewater by an inclined heavy-duty screw.
Our Atom S model is designed for tractors 50 hp and above. Suitable for stripping, loading, etc. Ideal for trailer loading. Thanks to its ergonomic and lightweight structure, it will not tire your tractor. 1 mt or 1.2 mt bucket options are available.
Properties;
Lifting Load Max. 3.5 m.
Discharge Height Max. 2.6 m.
Weight 300-325 kg.
Height 170 cm.
Width 125 cm.
Bucket Width 100-120 cm.
Bucket Volume 0.30-0.35 m³
Number of Hydraulic Hoses 3
Required Power 35-60 hp
Load Capacity Maximum it can handle 800 kg.
Attaches that can be installed:
Pop-up Bucket Attachment, Roll Bale Attachment, Skewer Square Bale Attachment
This product is suitable with strong formula for cleaning concrete .
Usage area of maintenance construction industry mainly.
Products are packaged in politilen drums of 30 kg.
An excavator grapple and dig bucket all-in-one, the NG Grab Bucket is the perfect tool for land clearing and demolition jobsites. Features dual thumb cylinders on the bucket for greater gripping force that follows the bucket throughout the entire curl cycle. The thumb is mounted directly to the bucket giving you superior machine versatility by allowing you to drop the entire thumb and bucket assembly as one piece.
NG Hydraulic Shear is suitable for various operations, including breaking the steel structure, scrap steel processing and other applications, cut iron material, steel, tank and tube etc, unique design and innovative ways to ensure the efficient operation and powerful cutting force.
NG BUCKET - NG ATTACHMENTS / Innovation Meets Excavation
Complete range of standard and reinforced digging buckets for excavators and loaders, rear and front quick couplers. Line of special buckets, with wear-proof equipment and larger thicknesses, conceived for the extractive sector in quarry and mining for excavators up to 200 t.
NEW JAW CRUSHERS READY AT STOCK
NEW MODEL TOP QUALITY FROM 100 to 150 tph capacity.
900 x 650 mm feeding dimension
25 Cr + 2% Mo Casting parts
90kW Motor Power
Features
Heavy-duty base frame is submerged, arc-welded, then thermally stress relieved.
Oversized, heavy-duty spherical, self-aligning roller bearings. Large diameter, drop-forged chrome-nickel steel pitman shaft.
Large flywheels to ensure the inertia is maintained to crush even the hardest materials.
HYDRAULIC SYSTEM
2 YEARS WARRANTY FREE OF CHARGE SPARE PARTS
30 m3/h mobile & compact full automatic concrete batching plant from constmach
Ideal solution for africa countries
Most economic concrete plant in the market.
Advantages of our mobicom 30 concrete plant:
Unlike classical mobile concrete plants, our mobicom 30 concrete plant can be shipped within only 1 pcs 40ft container.
It requires minimum site preparation and does not require a mobile crane for the installation. Only a loader is enough.
If you supply the cement in bags, you can use this plant without investing in a cement silo.
The plant can be shipped by a truck between your jobsites easily.
Mixer capacity: 0.5 m3
Aggregate hopper: 4 x 5 m3, total 20 m3
Control type: full automatic
Cement weighing hopper capacity: 300 kg
Water weighing hopper volume: 200 lt
Additive weighing hopper volume: 15 lt
Cement opening bag & cement screw conveyor is included.
Power:55hp
Weight:9, 000kg
Tyre condition:100%
Colour:beige
Bucket volume:1 m3
Chain status:100%
Assembly & training is included in the price.
Warranty : 2 years.
Full Automatic Stationary Concrete Plant
Capacity : 120 m3/h
Mixer : 3 m3 Wet Concrete Volume
Cement Hopper : 1800 kg
Water Hopper : 1000 kg
Admixture Hopper : 50 kg
Control Cabinet : Included in the price.
Cement Silos : Excluded. Optional.
ASSEMBLY & TRAINING IS INCLUDED IN THE PRICE.
WARRANTY : 2 YEARS.
R-Steel® Wire Loops and Boxes manufactured by R-Group Finland Oy are steel parts consisting of a high strength steel wire and a steel box. R-Steel® Wire Loop boxes are very easy to use on site, with proven no tool tear off tape that releases the flexible loops.
Our wire loop box range includes: Single wire loop boxes and Double wire loop boxes. Highly effeâ?¢cient product available for both precast and cast in situ structure. It is mainly used in the connection of slabs, walls and columns.
Quality control of the wire rope loops is done according to the requirements of the Finnish Code of Building Regulations and the instructions according to the quality and environment system of the R-Group Finland Oy (ISO9001 and ISO 14001). R-Group Finland Oy has a quality control contract with Inspecta Sertifiointi Oy.
The steel box and the wire rope are zinc coated. Zinced products are passivized with min. 1 month of storage.
R-Steel Loop is a flexible wire rope is bent to loop and held together by compression sleeve. R-Steel® Loop may be used e.g. to tie concrete wall elements to the building frame with ribbed steel bars installed through the wire rope loop.
The wire boxes have the advantage of ease of casting and protection of the loop, however the R-Steel® loops can be used in thinner panels and can also be used for lifting.
Single Wire Loop Boxes
For Single Boxes available standard wire lengths of 60 mm, 80 mm, 100 mm, 120 mm and 140 mm.
Double Wire Loop Boxes
Double Wire Loop Box offers unique solution for joining double walls to precast elements. Design resistances can be achieved in all directions.
Wire lenghts of 80 mm and 100 mm are available for double wire loop.
Thickness of the steel plate of the box is 0,7 mm, according to SFS-EN 12385.
Yoncalik Casting - Concrete Spare Parts LTD is a leading company of producing well-known companies such as (Putzmeister, Schwing, Cifa, Sermac, Junjin, etc.) and Truck Mixers (Imer, Stetter, Baryvall, Intermix etc.) Besides that we produce our own Concrete Pump and Truck Mixer Spare Parts,
Batching Plant Spare Parts, Cement Truck Cement Parts but we also sell genuine spare parts by offering attractive prices
Over the 17 years of experience Yoncalik Casting Co. has two factory facilities in Konya, Turkei produce more than 1.000 kinds of spare parts and so far export to 35 different countries.
Our Company's main goals are providing International standards, customer satisfaction, after sales follow-up. At quality department each part specifically controlled by Quality Control Engineers before delivery experienced engineers. Therefore, we believe that Yoncalik Spare Parts increases the productivity as well as the performance confirming EU Standardsâ?? with competitive prices.
Yoncalik Casting - Concrete Spare Parts LTD is a leading company of producing well-known companies such as (Putzmeister, Schwing, Cifa, Sermac, Junjin, etc.) and Truck Mixers (Imer, Stetter, Baryvall, Intermix etc.) Besides that we produce our own Concrete Pump and Truck Mixer Spare Parts,
Batching Plant Spare Parts, Cement Truck Cement Parts but we also sell genuine spare parts by offering attractive prices
Over the 17 years of experience Yoncalik Casting Co. has two factory facilities in Konya, Turkei produce more than 1.000 kinds of spare parts and so far export to 35 different countries.
Our Company's main goals are providing International standards, customer satisfaction, after sales follow-up. At quality department each part specifically controlled by Quality Control Engineers before delivery experienced engineers. Therefore, we believe that Yoncalik Spare Parts increases the productivity as well as the performance confirming EU Standards with competitive prices.
YONCALIK has the advantage of short time pattern making for its customers: New projects will be implemented shortly.
As a result, sample production takes less time compared to other foundries.
We can produce patterns according to technical drawings, customer samples and 3D Data. Suppliying of 3D files from customers reduced our pattern production time.
In patternmaking there are many options as raw material.
Pattern material is chosen according to the quantity of parts. (Small quantity, medium quantity and large quantity)
The patterns are manufactured according to samples or drawings by wood, epoxy or Alminum.
Our customer patterns then stored with begin of serie in our foundries
1881 Construction Equipment Machinery Suppliers
Short on time? Let Construction Equipment Machinery sellers contact you.
