An Amphibious Excavator is specially designed to work in swampy, wet land and shallow water. Our well designed Amphibious Undercarriages provides great mobility to work on soft terrains and swampy area.
Standard package of Amphibious Excavator is attached with long reach arm c/w conventional excavator bucket.
Amphibious Undercarriage has proven to work effectively on the following areas:
1) Swamp land clearing at mining, plantation and construction area.
2) Deepening of canal, river channel and river mouth.
3) Building bund for flood prevention and land reclamation.
4) Building bund wall for fish, shrimp ponds and salt making industry.
5) Clearing of lakes, ponds and water reservoir.
6) Digging trenches for oil & gas piping installation.
7) Clearing obstacles at landslide and flood hit area.
8) Water irrigation at paddy field and plantation.
Sunton amphibious undercarriage for drill rig The midsection is flat, no sleeve ring is required. Load capacity from 40 to 50 ton. The rig will be used in deeper water. The pontoon size shall be l*w*h=11m*3m*2m and the steel wall plate of the pontoon is reinforced and much thicker than the normal pontoons in order to stand the large torque force during the drill rigs being working. The weight of the undercarriage reaches about 40tons and the total buoyancy will be 90tons at least to provide a payload about 50 tons. Underwater weed harveste Each pontoon will have 4 chains tracks being equipped with special material wearing plate and 2 sets doosan tm60vc motors. Main specification is as below: The lifting load of the crane is 10tons. Water hyacinth harvester The platform payload is also 10tons. Pipe is made of steel, length 12m. Total buoyancy of the platform will be 41.3tons. The pontoon size will be l*w*h=10.2m*1.8m*1.8m, doosan tm60vc motors. Complete new type tracks and chains system for heavy duty applications. Suitable for long distance travelling on both swamp lands, solid lands and deep water. Vibration chute for gold mining Pontoons are treated with special wearing materials and paintings from wearing and corrosions from seawaters.
Standard Amphibious Undercarriages- Small and Medium Size Product Features 1) Pontoon Construction High Strength Weathering Cor-Ten plate steel is used in the fabrication of the pontoons. Cor-Ten steel is marine grade and corrosion resistance steel that has 5 to 8 times the atmospheric corrosion resistance and 20% more tensile strength than similar size 16Mn Q345B structural plate steel. In the pontoon, there are many supporting steel bars which reinforcing pontoon strongly. Each pontoon has 2 bulkheads, providing 3 independent watertight compartments with inspection plugs located on the outside of the pontoons. Each compartment of the pontoon has 1x25mm drain hole at bottom and 1x25mm inspection hole on side of pontoon near the top. Service man manholes on each pontoon are optional, made for easy maintenance and field servicing. Pontoons are shot blasted to ensure that the surface is thoroughly clean and free from contaminants and rust. In addition, this process presents the steel with a surface texture that provides excellent adhesion of prime coat of paint. Interior Metal Finish is coated with Zinc chromate rust inhibitor or Rust Inhibitor priming paint. Exterior Metal Finish is 2 part organic zinc epoxy base coat Primer, Epoxy topcoat. The bottom of the pontoon is reinforced for rough terrain operations. Especially the chains runway channels or paths are made of 3-layers steels, 2-part HD70 high tension steel plus the spring steel wear plate, which highly prolong the pontoon's service life. SUNTON Pontoon shape is quite uniquely designed that could reduce the resistance of the water or mud during its moving. The hydraulic hoses or pipes are shielded with steel from being damaged during operations. 2) Track Chains and Track Shoes Each SUNTON pontoon could be equipped with two, three or four strands of heavy-duty track chains. The chain link pads and track pads are all made of high tension steel HD70. The design and size of SUNTON track chain rollers and pins or bushes are all different from others with larger sizes. Tensile strength of link pads could reach 680Mpa. The chain roller paths/channels are lined with high strength abrasion-resistant steel and spring steel that matches the hardness of the chain rollers. Track shoes/cleats/pads are fabricated with heavy duty steel, which makes it less prone to cracking, due to the wider spread between yield strength and ultimate tensile strength. Track pad steel tensile strength reaches 620Mpa. Customer could select much harder steels, whose tensile strength could reach 860Mpa, but cost is higher. Track shoes are box-shaped, welded or bolted to the chains and fully covering the pontoons. UHMW wear plate or HDPE or HDMP plate, is the optional design to meet the challenge of wearing when machine often moves on stiff or tough ground. Usually there are two Ultra High Molecular Weight trackwear pads per cleat.
There are four models, zd120/zd200/zd210/zd240 for different upper parts, we can also custom according to your requirements. Length*width*height(mm)+total weight of undercarriage(ton) Zd120:6900*1400*1600+12.4 Zd200:8000*1600*1700+16 Zd210:8600*1800*1700+20.2 Zd240:9500*1800*1700+21.6
Supplier: Amphibious excavator & amphibious undercarriage, parts
Supplier: Amphibious excavator, pontoon, amphibious undercarriage, long reach arm, aquatic, harvester, long boom
Supplier: Amphibious excavators, amphibious pontoon undercarriages, marsh buggy undercarriages, wetland excavator undercarriages
Supplier: Amphibious excavator, swamp buggy, swamp excavator, pontoon undercarriage, submersible pump, dredging pump, long reach boom, bucket
