Material: SAE1006/1008 acc. to ASTM A510M Tensile strength: 350-450 N/mm2 Size tolerances: acc DIN 177, Bales of 5/10/20 coils, tied up with three iron signode and wrapped with extensible foiltrapped with iron hoo signode and wrapped with extensible foil,
Iron ore 58.5% - 61% Fe Contracts of 60.000 tons x 12 offered
Iron ore.
Iron ore, uncrushed, fe 49%.
Iron casting
Physical composition (on natural basis) Below 10 mm 90% min Over 10 mm 10% max Below 150 micron 40% max Quantity : 40, 000 wmt (+/- 10%) at sellerÆs option
Ironing boards 2 pcs one packed
Iron ore 20 mm to 40 mm %64 fe Bulk
Zinc ore chrome ore iron ore Zinc sulfate 38, 6 degree and arsenic 0, 5
Iron pellet Specification: Fe min 55, feO 1, 81, fe2O3 78, 36, SiO 6, 94, Al2O3 1, 26, Cao5, 97, Mgo 0, 55, Mn 0, 07, S0, 6, p 0, 145, Cu 0, 092, Cr 0, 002, Ni 0, 017, TiO2 0, 11, Na2O 0, 04, k2O 0, 12, Pb 0, 0015, Zn 0, 076, V2o5 0, 009 Granulometric distribution: 13 mm 11 10mm 68 5 mm 16 5 mm 5 Specific weight 3, 47g/cm3 Bulk density 2, 16g/cm3 Porosity 30, 3 Reducibility 82, 3 Damping point under pressure 1049 celsius Rezistance to crushing 150kg min/pellets
Hello We can offer iron Scrap Good condition The price 0.14 usd per ton
Iron ore Terms : FOB, CIF, Payment DLC / SBLC BG For minerals: payment 95% at loading Port after SGS, remaining 5% at destination Port after inspection. IMPORTANT: NO advance payment are request
Iron Ore Lumps Physical Size 3 " to Fines below 3 " min 95 % above 3 " max 5 % Fe basis 62 % (rejection below min 55.00 %) SIO2 max 8.00 % Al2O3 max 1.00 % P max 0.07 % S max 0.70 % Moisture max 8.00 % 5,000 Dry Metric Tons revolving by weekly spots
Iron ore with Fe2O3 content 70%. Fe2O3 - 70,03%, SiO2 - 22,08%, Al2O3 - 3,25%, P - 0,099%, FeO - 1,10%, CaO - 0,29%, MgO - 0,47%, TiO2 - 0,101%, MnO - 0,034%, S - 0,03%, Humidity - up to 5,00%. Iron ore with Fe2O3 content 60%. Fe2O3 - 60,29%, SiO2 - 35,54%, Al2O3 - 1,03%, P - 0,042%, FeO - 1,09%, CaO - 0,17%, MgO - 0,34%, TiO2 - 0,036%, MnO - 0,051%, S - 0,081%, Humidity - up to 5,00%. As a further step we are ready to provide you with product samples via DHL courier service and arrive to your place for negotiations at any time convenient for you.
Foundry Cast Iron : L1-L6 according to GOST 4832-95; SR EN 10001 L1-L6 according to GOST 4832-95; SR EN 10001 Ingot : 12-18 kg
We are selling titanium sponge, located in Rotterdam. We have 90 tons at the moment Ti: 98% min O: 0.10% max, N: 0.10% max C: 0.10% max CI: 0.15% max Si: 0.04% max F: 1.9% max Mg: 0.001% max Ni: 0.010% max Size: 5-30mm
Hot-rolled steel channels This type of channel is produced according to GOST 535-88 with parallel flanges and sloping flanges: 10, 10P and etc. The slope of inner flanges must not exceed 10%. Assortment of the steel hot-rolled channel corresponds to GOST 8240-89. The number of the channel corresponds to its size (distance between the inner flanges) expressed in cm. For example: Channel #10 - distance between the inner flanges equals 10cm. All other parameters: flange width, wall thickness and etc. according to GOST. Channel that has letter A at the end of the number (14A) is a channel with sloping inner flanges, it means the flanges are wider and hence the weight of each meter is larger than ordinary channel. There are special types of hot-rolled channel: special channel for automotive industry - GOST 19425-74 (18S, 20S); special channel for wagon production - GOST 5267.1-90 (8W, 14W, 18W).
I-BEAM- double flanged - this type of products include hot rolled double flanged beams (I-beams), produced according to GOST 535-88. I-Beams are separated into several types: I-Beams with parallel flanges normal (20B, and etc.) wide flanges (20Sh and etc.) column (20K and etc.) I-Beams with sloping edges of flanges normal (edge slope 6-12%) GOST 8239-89 (â??10, 12, 16 and etc.) Assortment of such I-Beams corresponds to GOST 8239-89. Special (M and C): M - for hanging rails (edge slope not more than 12%): 18M, 24M, 30M and etc.; C - for reinforcement of mine shafts (edge slope not more than 16%): 14S, 20S and etc. Assortment of such double flanged beams corresponds to GOST 19425-74. The number of the I-beam is its conventional size (height) in cm.
Assortment corresponds to GOST 8509-93. Precision classes: A - high precision; B - ordinary precision. The number of equal flange steel corresponds to flange width, expressed in mm. For example: Angle 25 -flange width 25mm. All other sizes (wall thickness and etc.) according to GOST (shown in the table of GOST book of reference).
Hot-rolled flat bar - the most sought-after type of strip. Distinguish rolled dimensional (length 0.6 and 1.2 m), a multiple of the measured length and unmeasured (length 0.2 - 0.6 m). At the same time, a bar with a thickness of up to 4.5 mm is produced with a width of all sizes provided for by GOST. In accordance with GOST 103-76, the size of this product may vary in the range:length - 2-10m; width - 20 200 mm;thickness - 4 - 40 mm.