Screen Size: 65 inches Interface Type: Composite A/V, DISPLAYPORT, LAN, Separate Video, Toslink, USB, VGA, Component Video, Digital Audio, support HDMI input, WiFi Resolution: 4K(3840*2160), HD(1366*768), HD1080(1920*1080), 1366*768,1920*1080P,3840*2160 Receiving System: NTSC, PAL, SECAM Refresh Rate: PAL(50Hz) ANT in (IEC terrestrial/cable): None Standard VESA: 300X300 Brand Name: CCTO Model Number: MS-650D Type: LCD Backlight Type: LED Wide Screen Support: Yes Display Format: 1080P (Full-HD) Use: Kitchen TV Place of Origin: China Product name: China LED TV Aspect ratio: 16:9 Panel Size: 65 inch Panel Grade: A+,A,A- Solution: ATV,DTV,Smart TV TV System: PAL,SECAM,NTSC,DVB-T Brightness: 1800-250 nits Light source: LED Resond Time: 5 ms Minimum order: 500 SETS Lead Time: 500sets, negotiable
Screen Size: 55 Inches Interface Type: Composite A/V, DISPLAYPORT, LAN, Separate Video, Toslink, USB, VGA, Component Video, Digital Audio, support HDMI input, WiFi Resolution: 4K(3840*2160), HD(1366*768), HD1080(1920*1080), 1366*768,1920*1080P,3840*2160 Receiving System: NTSC, PAL, SECAM Refresh Rate: PAL(50Hz) ANT in (IEC terrestrial/cable): None Standard VESA: 300X300 Brand Name: CCTO Model Number: E9 series smart tv 55 inch Type: LCD Backlight Type: LED Wide Screen Support: Yes Display Format: 1080P (Full-HD) Use: Kitchen TV Place of Origin: China Product name: 4k tv Aspect ratio: 16:9 Panel Size: 55 inch Panel Grade: A+,A,A- Solution: ATV,DTV,Smart TV TV System: PAL,SECAM,NTSC,DVB-T Brightness: 180-250 nits Light source: LED Resond Time: 5 ms Minimum order: 500 SETS Lead Time: 500sets, negotiable
Screen Size: >70inches Interface Type: Composite A/V, DISPLAYPORT, LAN, Toslink, USB, VGA, Component Video, Digital Audio, support HDMI input, WiFi Resolution: 4K(3840*2160), HD(1366*768), HD1080(1920*1080), 1366*768,1920*1080P,3840*2160 Receiving System: NTSC, PAL, SECAM Refresh Rate: PAL(50Hz) ANT in (IEC terrestrial/cable): None Standard VESA: 300X300 Brand Name: CCTO Model Number: X01 series android tv Type: LCD Backlight Type: LED Wide Screen Support: Yes Display Format: 1080P (Full-HD) Use: Kitchen TV Place of Origin: China Product name: 75 inch tv Aspect ratio: 16:9 Panel Size: 75 inch Panel Grade: A+,A,A- Solution: ATV,DTV,Smart TV TV System: PAL,SECAM,NTSC,DVB-T Brightness: 200-250 nits Light source: LED Resond Time: 5 ms Minimum order: 500 SETS Lead Time: 500sets, negotiable
Screen Size: >70inches Interface Type: Composite A/V, DISPLAYPORT, LAN, Toslink, USB, VGA, Component Video, Digital Audio, support HDMI input, WiFi Resolution: 4K(3840*2160), HD(1366*768), HD1080(1920*1080), 1366*768,1920*1080P,3840*2160 Receiving System: NTSC, PAL, SECAM Refresh Rate: PAL(50Hz) ANT in (IEC terrestrial/cable): None Standard VESA: 300X300 Brand Name: CCTO Model Number: 49DK series Type: LCD Backlight Type: LED Wide Screen Support: Yes Display Format: 1080P (Full-HD) Use: Kitchen TV Place of Origin: China Product name: TV smart 4K Aspect ratio: 16:9 Panel Size: 75 inch Panel Grade: A+,A,A- Solution: ATV,DTV,Smart TV TV System: PAL,SECAM,NTSC,DVB-T Brightness: 200-250 nits Light source: LED Resond Time: 5 ms Minimum order: 500 SETS Lead Time: 500sets, negotiable
Screen Size: 50 inches Interface Type: Composite A/V, DISPLAYPORT, LAN, Separate Video, Toslink, USB, VGA, Component Video, Digital Audio, support HDMI input, WiFi Resolution: 4K(3840*2160), HD(1366*768), HD1080(1920*1080), 1366*768,1920*1080P,3840*2160 Receiving System: NTSC, PAL, SECAM Refresh Rate: PAL(50Hz) ANT in (IEC terrestrial/cable): None Standard VESA: 300X300 Brand Name: CCTO Model Number: 49E6 series Type: LCD Backlight Type: LED Wide Screen Support: Yes Display Format: 1080P (Full-HD) Use: Kitchen TV Place of Origin: China Product name: led tv 4k Aspect ratio: 16:9 Panel Size: 50 inch Panel Grade: A+,A,A- Solution: ATV,DTV,Smart TV TV System: PAL,SECAM,NTSC,DVB-T Brightness: 180-250 nits Light source: LED Resond Time: 5 ms
Screen Size: 32 Inches Interface Type: Composite A/V, DISPLAYPORT, LAN, Separate Video, Toslink, USB, VGA, Component Video, Digital Audio, support HDMI input, WiFi Resolution: 4K(3840*2160), HD(1366*768), HD1080(1920*1080), 1366*768,1920*1080P,3840*2160 Receiving System: NTSC, PAL, SECAM Refresh Rate: PAL(50Hz) ANT in (IEC terrestrial/cable): None Standard VESA: 300X300 Brand Name: CCTO Model Number: SLT-315x01 Type: LCD Backlight Type: LED Wide Screen Support: Yes Display Format: 1080P (Full-HD) Use: Hotel TV Place of Origin: China Product name: tv led 32 inch Aspect ratio: 16:9 Panel Size: 32" Panel Grade: A+,A,A- Solution: ATV,DTV,Smart TV TV System: PAL,SECAM,NTSC,DVB-T Brightness: 230 nits Light source: LED Resond Time: 5 ms Minimum order: 500 SETS Lead Time: 500sets, negotiable
Screen Size: 40 Inches Interface Type: Composite A/V, DISPLAYPORT, LAN, Toslink, USB, VGA, Component Video, Digital Audio, support HDMI input, WiFi Resolution: 4K(3840*2160), HD(1366*768), HD1080(1920*1080), 1366*768,1920*1080P,3840*2160 Receiving System: NTSC, PAL, SECAM Refresh Rate: PAL(50Hz) ANT in (IEC terrestrial/cable): None Standard VESA: 300X300 Brand Name: CCTO Model Number: X01 series universal led tv 40 inch Type: LCD Backlight Type: LED Wide Screen Support: Yes Display Format: 1080P (Full-HD) Use: Kitchen TV Place of Origin: China Product name: universal led tv 40 inch Aspect ratio: 16:9 Panel Size: 40 inch Panel Grade: A+,A,A- Solution: ATV,DTV,Smart TV TV System: PAL,SECAM,NTSC,DVB-T Brightness: 200-250 nits Light source: LED Resond Time: 5 ms Minimum order: 500 SETS Lead Time: 500sets, negotiable
Whether you're gathering evidence, recording traffic violations or interrogating a suspect, a quality recorder means everything for police officers and law enforcement personnel. For law enforcement officials, stakes are high and time is precious. Interviewing victims, suspects and witnesses is a complex process and accuracy is utmostly important. Cuckoo-HR1 LTE Tri-proof Law Enforcement Recorder is developed based on Android system, which offers real-time recording and live audio and video transmission for long distance, and enhances the security features and trouble free integration with exisiting IFLY Emergency Communciation system. Product Highlights Easy to Use - For All Applications one-button record mechanism for easy operation IP67 durable housing design protects from dust and water damage, and work normally in -20°C~+80°C temperatures. illuminated 2.8" front-facing screen - proven to reduce conflict and aggression - and a 140 degree wide-angle viewing behind camera for event recording to ensure incidents are not missed. The rechargeable battery provides an operating time of up to 100 hours in standby mode or 8 hours in full recording mode. Live Transmission The transmission function enables a remote command center's connection to a body worn camera in the field, allowing an operator to view live video, communicate with the wearer and understand their position via GPS. Alternatively, the wearer of the device can send an alert back to a control room, monitoring station or command centre with their live video, GPS location details and a request for assistance.
Punching marking making machine iron aluminum plate punching making machine Specification: Dimensionï¼?200cmx190cmx175cm Weightï¼?350KG This machine is designed as customered with different dot or pictures. Packingï¼? Main machine is nude, the computer control box is packed with wooden frame. Main machine is nude in the container, the computer control box is packed with wooden packaging. This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug. Botou Xinbo Machine Making Company mainly produce and sell All kinds of machines and cnc machining services. roll forming machines,C Z purlin machine, deck floor machinesï¼?stud &track light keel machine, T grid machine, downpipe machine,EPS and Rockwool sandwich panel machines for the building structure and all kinds of CNC machining services.
Hardware Specifications Chipset: RK3328 Quad-Core 64bit Cortex-A53 GPU: Penta-Core Mali-450 Up to 750Mhz+ FLASH: EMMC 32GB(16GB option) SDRAM: 4GB DDR3(2GB option) Power Supply Specifications Power Supply: DC 5V/2.5A Power Indicator (LED): Power ON :blue; Standby :Red Main Features OS: Android 9.0 Support Decoder format : 4K VP9 Video decoder, H.265/H.264 video decoder,1080P other video decoders (VC-1, MPEG-1/2/4, VP6/8) Support Media format: Avi/Ts/Vob/Mkv/Mov/ISO/wmv/asf/flv/dat/mpg/mpeg Support Music format: MP3/WMA/AAC/WAV/OGG/DDP/HD/FLAC/APE Support Photo format: HD JPEG/BMP/GIF/PNG/TIFF HDR: HDR10 and HLG modes USB: 1 High speed USB 3.0 and 3 High speed USB 2.0 Card reader: SD cards HDD file system: FAT16/FAT32/NTFS Support Subtitle: SRT/SMI/SUB/SSA/IDX+USB High Definition video output: 4K (4096x2160 pixel ) OSD type of languages: English/French/German/Spanish/Italian/ etc multilateral languages LAN Ethernet:100/1000 standard RJ-45 Wireless: 2.4G /5G dual-band Wifi, Built in Antenna with 2T2R BT: V4.1 Mouse/Keyboard: Support mouse and keyboard via USB;Support 2.4GHz wireless mouse and keyboard via 2.4GHz USB dongle HD: HD 2.0a for 4k@60Hz AV: Support SPDIF/IEC958: Coaxial Software Specifications Network Function: Neflix,Vudu,Skype chatting,Picasa,Flicker,Youtube,Facebook,Online movies,etc Other feature: Free Internet searching,thousands of android applications,many kinds of games,etc. Certification: CE,FCC,ROHS Accessories: Power adaptor,HD cable,user manual ,remote Option: Support mouse and keyboard via USB;Support 2.4GHz wireless mouse and keyboard via 2.4GHz USB dongle
Techwin 1.0μm Single Mode CW Fiber Lasers for Test and Measure www.techwin-china.com we try to supply fiber laser similar to keopsys fiber laser,NKT Photonics fiber laser,NP Photonics fiber laser,IPG Photonics fiber laser,BKtel Photonics fiber laser Product Overview: Techwin 1.0μm single-mode CW fiber lasers of are a highly integrated continuous Yb-doped fiber laser system with high power output. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser. The output power can be up to 20W and near diffraction-limited beam quality is achieved at the same time. They can be widely used in the areas of scientific research, experimental teaching and device testing. Techwin 1.0μm single-mode CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, Techwin can offer modularized package according to the user`s requirements. Features: � High output power�up to 50W � Excellent beam quality � High Stability and reliable performance � Single-mode output�PM optional Applications: � Test and measure � Scientific research � Spectroscopy analysis � Other lab applications
The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing. 1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high. 2. NC controller and touch screen are used for easy operation and fault detection. 3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing. 5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping. 6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding. 7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment. Model ZG-360NC Cutting Angle 90° Cutting ability mm 110 105Ã?105 175Ã?50 90 80Ã?80 Machine motor 5.5HP 4P Saw blade 2850R.P.M Feed servo motor 1KW Blade size Tungsten steel blade with blade tip Ï?305ã??405Ã?Ï?25.4mm Operating air pressure 6-8kg/cm2 Machine dimension 2000Ã?1100Ã?2006 Machine weight 960kg
The DJI Zenmuse X7 Camera features a detachable 3-axis gimbal that provides stabilization and enables the camera to move independently of the aircraft. This camera system offers multiple recording options, including 6K video at 17:9 and 16:9 aspect ratios, DCI 4K at 30 fps, and UHD 4K at 60 fps in Cinema-DNG format; it also supports DCI and UHD 4K in ProRes and H.265/H.264. In addition to video, the Zenmuse X7 shoots 24MP still images, which can be captured in various photo modes, including individual or bursts. The Zenmuse X7 supports both microSD and DJI CINESSD cards.
The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing. 1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high. 2. NC controller and touch screen are used for easy operation and fault detection. 3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing. 5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping. 6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding. 7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment. Model ZG-360NC Cutting Angle 90° Cutting ability mm 110 105Ã?105 175Ã?50 90 80Ã?80 Machine motor 5.5HP 4P Saw blade 2850R.P.M Feed servo motor 1KW Blade size Tungsten steel blade with blade tip Ï?305ã??405Ã?Ï?25.4mm Operating air pressure 6-8kg/cm2 Machine dimension 2000Ã?1100Ã?2006 Machine weight 960kg
Be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, PVC profiles, plastics, PVC, Bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, CPU, hard pan, MP3 aluminum case, U disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles. 1ã??Accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency. 2ã?? Stamp foot switch to auto press and saw materials, which is safe and easy. 3ã?? Down-to-up hidden sawing mode: high security, single or multi cutting available. 4ã?? Pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing). 5ã?? Be able to set pressing height and speed and cutting height and speed according to material size and thickness. 6ã?? Precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade. 7ã?? 0~45 angle cutting available. Angle adjustment is easy and accurate. Model ZG-510SA Sawing angle +45° ~ 0°~ -45° Blade size 20"x1" Inner hole Saw blade 3000R.P.M. Machine motor 5 HP Pressure required 4-6kg/cm² Size of Table 920x650mm Table height 900mm NW/GW 570 / 640kgs Machine dimension ( LxWxH ) 1200x1090x1780mm Packing dimension ( LxWxH ) 1320x1210x1980mm
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and Windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile. 1. accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency. 2. only foot switch, automatic mechanical pressure, automatic saw material is safe and easy 3. hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time 4. the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure) 5. press height and speed and saw cutting height and speed can be set according to material size and thickness. 6. precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life 7. can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate. Model ZG-610SA Sawing angle +45° ~ 0°~ -45° Blade size 24"x1" Inner hole Saw blade 2000R.P.M. Machine motor 7.5 HP Pressure required 4-6kg/cm² Size of Table 1130x800mm Table height 1030mm NW/GW 790 / 870kgs Machine dimension ( LxWxH ) 1330x1200x2000mm Packing dimension ( LxWxH ) 1450x1320x2180mm
High spindle rotation. Cut two 45° (one 45°at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45°saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum â?¦â?¦ ). 1. Double-pole synchronous saw cutting: cut two 45° (one 45°at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting. 2. Stamp foot switch to auto press and saw materials, which is safe and easy. 3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp. 4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming. 5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform). Model ZG-350SA2 Sawing angle 45Ã?2 Max. sawing width 90mm Max. sawing height 140mm Spindle speed 3300R.P.M Saw blade tungsten steel head; alloy saw blade Dimension of work surface 870Ã?190Ã?800mm Machine motor 2HPÃ?2 Air pressure 6kg/cm2 Machine dimension 1410Ã?900Ã?1300 Packing dimension 1500Ã?980Ã?1420mm,2500*150*100 NW/GW 390/460kg
What is the cold laser therapy wrist watch device treatment range: Hypertension , Hyper viscosity , hyperlipemia , diabetic complication , hyper lipidemia , is chemic heart and cerebral vascular disease caused by cardiovascular and cerebrovascular diseases. ( 11 laser beams illuminate the acupoint of the wrist to treatment these diseases and purify bloodï¼?Our wristwatch has one pair nasal probe) It` s also has good curative on the Rhinitis, allergic rhinitis, acute rhinitis, chronic rhinitis, sinusitis and nasal polyps. COZING-11C +ear diode could treat Otitis media,ear deaf ,tinnitus etc. What's the Indications of The Laser Therapy Device ? 1. High blood pressure, high blood fat, high blood sugar, diabetes 2. high blood viscosity, cerebral thrombosis, stroke, sudden death 3. pain relief, sport injury, wound, joint pain, fracture, arthritis and all kinds of body pain 4. rhinitis, allergic rhinitis, acute rhinitis, chronic rhinitis, sinusitis and nasal polyps 5. hyperviscosity, hyperlipemia, hyperlipidemia, hypertension, cardiovascular and cerebrovascular diseases nose ear probe What is the Clinical test of the Home use red laser light therapy device? After about 30 min irradiation treatment, blood red cells wil be activated, become single, active, health and normal. After about 30 days treatment, headache, dizziness, chest tightness, numbness and other symptoms will disappear. After about 3 months treatment, you can do blood detect, or CT detect, high blood pressure, high blood viscosity, high cholesterol will get back to a normal level. What's the Characteristics of the Laser therapy device ? 1 . Physical therapy with low level laser therapy , no side effect, no trauma 2 . Small size, easy to carry, it could be use at anywhere 3. It`s adopt the non-invasive laser acupuncture, to ensure the treatment efficiency 4. The treatment efficiency is around 90% 5. Imported laser diode , to ensure the laser output quality and durable 6. It could also connect to the ear treatment probe, oral&throat treatment probe and pain relief probe(that`s all the extra parts) 7. The exterior shell is stainless steel, show the high class , and help the main device heat output. 8. The wrist part shape is coordinate with the wrist shape, the humanized design. 9. This technological has been proved,and got a CE certification.
What is the cold laser therapy wrist watch device treatment range: Hypertension , Hyper viscosity , hyperlipemia , diabetic complication , hyper lipidemia , is chemic heart and cerebral vascular disease caused by cardiovascular and cerebrovascular diseases. ( 11 laser beams illuminate the acupoint of the wrist to treatment these diseases and purify bloodï¼?Our wristwatch has one pair nasal probe) It` s also has good curative on the Rhinitis, allergic rhinitis, acute rhinitis, chronic rhinitis, sinusitis and nasal polyps. COZING-11C +pain relief diode could treat : pain relief, Knee arthritis, Rheumatoid Arthritis, Athletic system injuries, Soft tissue injuries, 2 Diminish inflammations, Wounds & Ulcers, Osteoarthritis, Acupuncture, Rehabilitation therapy Joint & soft tissue injuries Neck & Back arthritis Strains & sprains Frozen shoulder Tennis/Golfer Elbow Sciatica Knee/ foot pain Achilles Tendonitis What's the Indications of The Laser Therapy Device ? 1. High blood pressure, high blood fat, high blood sugar, diabetes 2. high blood viscosity, cerebral thrombosis, stroke, sudden death 3. pain relief, sport injury, wound, joint pain, fracture, arthritis and all kinds of body pain 4. rhinitis, allergic rhinitis, acute rhinitis, chronic rhinitis, sinusitis and nasal polyps 5. hyperviscosity, hyperlipemia, hyperlipidemia, hypertension, cardiovascular and cerebrovascular diseases What is the Clinical test of the Home use red laser light therapy device? After about 30 min irradiation treatment, blood red cells wil be activated, become single, active, health and normal. After about 30 days treatment, headache, dizziness, chest tightness, numbness and other symptoms will disappear. After about 3 months treatment, you can do blood detect, or CT detect, high blood pressure, high blood viscosity, high cholesterol will get back to a normal level. What's the Characteristics of the Laser therapy device ? 1 . Physical therapy with low level laser therapy , no side effect, no trauma 2 . Small size, easy to carry, it could be use at anywhere 3. It`s adopt the non-invasive laser acupuncture, to ensure the treatment efficiency 4. The treatment efficiency is around 90% 5. Imported laser diode , to ensure the laser output quality and durable 6. It could also connect to the ear treatment probe, oral&throat treatment probe and pain relief probe(that`s all the extra parts) 7. The exterior shell is stainless steel, show the high class , and help the main device heat output. 8. The wrist part shape is coordinate with the wrist shape, the humanized design. 9. This technological has been proved,and got a CE certification.
Be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, PVC profiles, plastics, PVC, Bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, CPU, hard pan, MP3 aluminum case, U disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles. Accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency. Stamp foot switch to auto press and saw materials, which is safe and easy. Down-to-up hidden sawing mode: high security, single or multi cutting available. Pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing). Be able to set pressing height and speed and cutting height and speed according to material size and thickness. Precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade. 0~45 angle cutting available. Angle adjustment is easy and accurate. Standard accessories: alloy
