The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing.
1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high.
2. NC controller and touch screen are used for easy operation and fault detection.
3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.
4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing.
5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping.
6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding.
7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment.
Model ZG-360NC
Cutting Angle 90°
Cutting ability
mm
110
105Ã?105
175Ã?50
90
80Ã?80
Machine motor 5.5HP 4P
Saw blade 2850R.P.M
Feed servo motor 1KW
Blade size Tungsten steel blade with blade tip
Ï?305ã??405Ã?Ï?25.4mm
Operating air pressure 6-8kg/cm2
Machine dimension 2000Ã?1100Ã?2006
Machine weight 960kg
The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing. 1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high. 2. NC controller and touch screen are used for easy operation and fault detection. 3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing. 5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping. 6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding. 7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment. Model ZG-360NC Cutting Angle 90° Cutting ability mm 110 105Ã?105 175Ã?50 90 80Ã?80 Machine motor 5.5HP 4P Saw blade 2850R.P.M Feed servo motor 1KW Blade size Tungsten steel blade with blade tip Ï?305ã??405Ã?Ï?25.4mm Operating air pressure 6-8kg/cm2 Machine dimension 2000Ã?1100Ã?2006 Machine weight 960kg
Be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, PVC profiles, plastics, PVC, Bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, CPU, hard pan, MP3 aluminum case, U disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles. 1ã??Accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency. 2ã?? Stamp foot switch to auto press and saw materials, which is safe and easy. 3ã?? Down-to-up hidden sawing mode: high security, single or multi cutting available. 4ã?? Pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing). 5ã?? Be able to set pressing height and speed and cutting height and speed according to material size and thickness. 6ã?? Precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade. 7ã?? 0~45 angle cutting available. Angle adjustment is easy and accurate. Model ZG-510SA Sawing angle +45° ~ 0°~ -45° Blade size 20"x1" Inner hole Saw blade 3000R.P.M. Machine motor 5 HP Pressure required 4-6kg/cm² Size of Table 920x650mm Table height 900mm NW/GW 570 / 640kgs Machine dimension ( LxWxH ) 1200x1090x1780mm Packing dimension ( LxWxH ) 1320x1210x1980mm
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and Windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile. 1. accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency. 2. only foot switch, automatic mechanical pressure, automatic saw material is safe and easy 3. hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time 4. the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure) 5. press height and speed and saw cutting height and speed can be set according to material size and thickness. 6. precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life 7. can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate. Model ZG-610SA Sawing angle +45° ~ 0°~ -45° Blade size 24"x1" Inner hole Saw blade 2000R.P.M. Machine motor 7.5 HP Pressure required 4-6kg/cm² Size of Table 1130x800mm Table height 1030mm NW/GW 790 / 870kgs Machine dimension ( LxWxH ) 1330x1200x2000mm Packing dimension ( LxWxH ) 1450x1320x2180mm
High spindle rotation. Cut two 45° (one 45°at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45°saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum â?¦â?¦ ). 1. Double-pole synchronous saw cutting: cut two 45° (one 45°at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting. 2. Stamp foot switch to auto press and saw materials, which is safe and easy. 3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp. 4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming. 5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform). Model ZG-350SA2 Sawing angle 45Ã?2 Max. sawing width 90mm Max. sawing height 140mm Spindle speed 3300R.P.M Saw blade tungsten steel head; alloy saw blade Dimension of work surface 870Ã?190Ã?800mm Machine motor 2HPÃ?2 Air pressure 6kg/cm2 Machine dimension 1410Ã?900Ã?1300 Packing dimension 1500Ã?980Ã?1420mm,2500*150*100 NW/GW 390/460kg
Be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, PVC profiles, plastics, PVC, Bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, CPU, hard pan, MP3 aluminum case, U disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles. Accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency. Stamp foot switch to auto press and saw materials, which is safe and easy. Down-to-up hidden sawing mode: high security, single or multi cutting available. Pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing). Be able to set pressing height and speed and cutting height and speed according to material size and thickness. Precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade. 0~45 angle cutting available. Angle adjustment is easy and accurate. Standard accessories: alloy
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Application field: Coaxial cable, CATV cable, Tracer wire, Railway cable, Automotive cable,Consumer electronics,, Low voltage power cable Size available: 0.08mm-5mm Temper offered: Hard drawn /Annealed Strength offered: Normal strength ,High strength Standard: ASTM B566 Package: Wire will be loaded on steel spool with 100kgs, 300kgs ,500kgs,750kgs per unit and put on plywood pallets which is suitable for sea transportation. (Both eye to wall and eye to sky is acceptable.)
This co2 laser cutting machine can use for engraving and cutting nonmetal materials. Applicable Materials Glass, organic glass, leather, cloth, acrylic, wood, MDF, PVC, plywood, maple leaf, double-color sheet, bamboo, Plexiglas, paper, leather, marble, ceramics etc. nonmetal materials. Applicable Industries Advertisement, arts and crafts, leather, toys, garments, model, building upholstery, computerized embroidery and clipping, packaging and paper industry. Our Services Rather careful and professional packing way for machine protection. 1 - Film. Put PE film on the machine and some spare parts, then put bubble wrap to the machine. 2 - Free-fumigation wooden case with steel tube support on wooden cover. The humidity-proof paper above the wooden plate. This kind of package could protect the machine very well from dust and humidity etc.
Main feature of cnc oscillating knife cutting machine Cutting by knife not laser, no air pollution, no burnt edge, cutting speed is 5-8 times faster than co2 laser machine. Imported PMI square linear guide and servo motor ensure high precision and fast cutting speed. High performance is guaranteed with the integrated circuit plate. The application of an USD/Ethernet port makes the cutting plotters fast and convenient. Easy operate. This cutting machine was designed easy to install, set-up and operate. Special safety sensory device meets the European standard. The platform detection device regulates the knife pressure automatically, enabling a level platform and perfect cutting.
