Be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, PVC profiles, plastics, PVC, Bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, CPU, hard pan, MP3 aluminum case, U disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles.
1ã??Accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency.
2ã?? Stamp foot switch to auto press and saw materials, which is safe and easy.
3ã?? Down-to-up hidden sawing mode: high security, single or multi cutting available.
4ã?? Pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing).
5ã?? Be able to set pressing height and speed and cutting height and speed according to material size and thickness.
6ã?? Precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade.
7ã?? 0~45 angle cutting available. Angle adjustment is easy and accurate.
Model ZG-510SA
Sawing angle +45° ~ 0°~ -45°
Blade size 20"x1" Inner hole
Saw blade 3000R.P.M.
Machine motor 5 HP
Pressure required 4-6kg/cm²
Size of Table 920x650mm
Table height 900mm
NW/GW 570 / 640kgs
Machine dimension ( LxWxH ) 1200x1090x1780mm
Packing dimension ( LxWxH ) 1320x1210x1980mm
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Model: GQ50A rebar cutting machine Cutting Diameter: TMT Barâ?¤50 mmï¼?HYSD Barâ?¤40mm Powerï¼?4kw Voltageï¼?380v Motor Speed: 2890 r/min Cutting Frequency: 28 t/min Net Weight: 600 kg Dimension: 1500*530*880mm
This co2 laser cutting machine can use for engraving and cutting nonmetal materials. Applicable Materials Glass, organic glass, leather, cloth, acrylic, wood, MDF, PVC, plywood, maple leaf, double-color sheet, bamboo, Plexiglas, paper, leather, marble, ceramics etc. nonmetal materials. Applicable Industries Advertisement, arts and crafts, leather, toys, garments, model, building upholstery, computerized embroidery and clipping, packaging and paper industry. Our Services Rather careful and professional packing way for machine protection. 1 - Film. Put PE film on the machine and some spare parts, then put bubble wrap to the machine. 2 - Free-fumigation wooden case with steel tube support on wooden cover. The humidity-proof paper above the wooden plate. This kind of package could protect the machine very well from dust and humidity etc.
Main feature of cnc oscillating knife cutting machine Cutting by knife not laser, no air pollution, no burnt edge, cutting speed is 5-8 times faster than co2 laser machine. Imported PMI square linear guide and servo motor ensure high precision and fast cutting speed. High performance is guaranteed with the integrated circuit plate. The application of an USD/Ethernet port makes the cutting plotters fast and convenient. Easy operate. This cutting machine was designed easy to install, set-up and operate. Special safety sensory device meets the European standard. The platform detection device regulates the knife pressure automatically, enabling a level platform and perfect cutting.
The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing. 1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high. 2. NC controller and touch screen are used for easy operation and fault detection. 3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing. 5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping. 6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding. 7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment. Model ZG-360NC Cutting Angle 90° Cutting ability mm 110 105Ã?105 175Ã?50 90 80Ã?80 Machine motor 5.5HP 4P Saw blade 2850R.P.M Feed servo motor 1KW Blade size Tungsten steel blade with blade tip Ï?305ã??405Ã?Ï?25.4mm Operating air pressure 6-8kg/cm2 Machine dimension 2000Ã?1100Ã?2006 Machine weight 960kg
The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing. 1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high. 2. NC controller and touch screen are used for easy operation and fault detection. 3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing. 5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping. 6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding. 7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment. Model ZG-360NC Cutting Angle 90° Cutting ability mm 110 105Ã?105 175Ã?50 90 80Ã?80 Machine motor 5.5HP 4P Saw blade 2850R.P.M Feed servo motor 1KW Blade size Tungsten steel blade with blade tip Ï?305ã??405Ã?Ï?25.4mm Operating air pressure 6-8kg/cm2 Machine dimension 2000Ã?1100Ã?2006 Machine weight 960kg
The fiber laser cutting machine is a high quality, high speed, high precision, high-efficiency CNC laser metal cutting system. It has the advantages of high processing accuracy, fast cutting speed, narrow cutting slit, minimal heat-affected zone, smooth cutting surface and no burr. From the user processing requirements, fiber laser cutting machines can be divided into sheet metal laser cutting machines and pipe laser cutting machines. As the name implies, a sheet metal laser cutting machine is mainly used for processing various types of metal plates. This kind of sheet metal cutting machine is mainly used in the sheet metal industry. Tube laser cutting machine is mainly used for processing various metal tubes, including square and round tubes. This kind of tube laser cutting machine is mainly used in the kitchen, bathroom, fitness industry, and automobile industry. Best Intelligent Equipment is one of the largest and most professional fiber laser cutting machine manufacturers and suppliers . With a group of professional and efficient personnel, we can provide you with a 1000W-40000W fiber laser cutting machine, contact us to get the fiber laser cutting machine price
CNC Metal Laser Cutting Machine Detail Show Raycus/IPG Laser Generator Double head: Au3tech cutting head and co2 laser cutting head Taiwan TBI ballscrew transmission Taiwan lapping 25mm guide rails Delta 750w servo motor and drivers Water chiller Co2 laser tube CNC Metal Laser Cutting Machine Application Fiber laser cutting machine is good at processing on common metal items in daily life such as advertising metal letter, kitchenware, environmental protection equipment. Laser cutting machines are widely used in electronics, electrical, mechanical hardware, new energy lithium, packaging, solar, LED, automotive and other industries. Stainless steel, carbon steel, alloy steel, copper, brass, silicon steel, galvanized steel sheet, nickel titanium alloy, inconel, titanium alloy, etc. Co2 laser cutting machine is used in the industries, such as large area digitalprinting, embroidering, car seat cushion, cloth toy, umbrella, wedding dress, model, handicraft, advertisement decoration, packing and printing, garment, leather, electronics, paper product, etc. Applicable materials: Non-metallic materials, such as wooden ware, paper, leather, cloth, organic glass, epoxy resin, acrylic, woolens, plastic, etc.
TXT-FS-3015 Fiber Laser cutting machine integrates high power fiber laser, optical, mechanical and electrical in one system which adopts latest laser technology, CNC control technology and high-performance laser power system to process all kinds of metal sheets cutting with high speed and efficiency. The cutting range for the Laser Cutting Machine is 3000mm 1500mm. It has high speed and its products have smooth edge, small kerf width and little heat effect. This kind of machine is especially suitable for thin sheet metal cutting.
