Narrow Linewidth CW fiber laser for spectrum combination www dot techwin-china dot com We will try our best to provide products similar to keopsys fiber laser, NKT Photonics fiber laser, NP Photonics fiber laser, PG Photonics fiber laser, BKtel Photonics fiber laser. Brief Introduction of Techwin 1.0m Narrow Linewidth CW fiber laser : Techwin 1.0m Narrow Linewidth CW fiber lasers are specific designed for high demanding applications such as spectrum combination. This MOPA designed fiber laser features narrow spectrum width, say less than 0.1nm, cascaded multi-stage all fiber amplifiers generate high power output and maintain high output beam quality, singlemode output. Narrow Linewidth CW fiber lasers Advantages: The seed laser is unique, Techwin has the all fiber technology for generating narrow spectrum width seed laser, it keeps broadband spectrum content, this is the key advantage to eliminate non-linear effects during high power amplification, such as SBS. Techwin 1.0m narrow linewidth CW fiber lasers are ideal for power scaling without SBS effect. Besides, Techwin 1.0m narrow linewidth CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, our company can offer modularized encapsulation according to the users requirements. Techwin 1.0m Narrow Linewidth CW fiber lasers Features: High output powerup to 100W excellent beam quality, singlemode high Stability and reliable performance All-fiber structure PM optional And Where are the Narrow Linewidth CW fiber laser applied? Seed laser for high power fiber lasers Spectrum combination Coherent combination (PM version) Test and measurement Science research
Product Name: Solar Power Battery Wifi Camera Resolution: 1280*960 (1.3mp) IR LEDs: 6pcs 850nm LEDs, Battery: 6800mAh Lithium Battery Storage: with TF Card Slot (support 8G/16G/32G/64G) Audio: built-in Mic for two-way audio function Connection: Wi-Fi (IEEE 802.11b/g/n 2.4GHz) Remote Monitoring: Smart Phone APP Record: Mobile APP Local Record and Device Record on TF Cards (start record once camera wake up) Camera Wake up: Wake up by Mobile Phone or PIR Push up time: normally push to mobile within 2 - 8 seconds Motion Detection: PIR Motion Detection, Sensibility Adjustable (high, middle, low), IP Grade: IP66 Weatherproof for Outdoor
orignal Reci laser tube
500W/750W/1000W/1500W/2000W and more
IPG/ RAYCUS/ MAX
Techwin single-mode CW fiber lasers with high power output www dot techwin-china dot com We will try our best to provide products similar to keopsys fiber laser� NKT Photonics fiber laser�NP Photonics fiber laser�IPG Photonics fiber laser�BKtel Photonics fiber laser. Techwin 1.0μm single-mode CW fiber lasers of are a highly integrated continuous Yb-doped fiber laser system with high power output. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser. The output power can be up to 20W and near diffraction-limited beam quality is achieved at the same time. They can be widely used in the areas of scientific research, experimental teaching and device testing. Techwin 1.0μm single-mode CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, Techwin can offer modularized package according to the user`s requirements.
Key Features Hasselblad 20MP / UHD 4K Gimbal Camera 1" CMOS + f/2.8-f/11 Adjustable Aperture Fly More Kit Accessory Bundle 1 Year of DJI Care Refresh Included DJI Mavic 2 Pro Performance Maximum Takeoff Weight 2.00 lb / 907 g Maximum Horizontal Speed 44.7 mph / 72 km/h (S-Mode) Maximum Ascent Speed 16.4 ft/s / 5 m/s Maximum Descent Speed 9.8 ft/s / 3 m/s Maximum Wind Resistance 23.6 mph / 38 km/h Flight Ceiling 3 mi / 6000 m Maximum Flight Time 31 Minutes Maximum Hover Time 29 Minutes Maximum Tilt Angle 35° Hovering Accuracy ±0.33' / 0.1 m Vertical with Vision Positioning ±1.64' / 0.5 m Vertical with GPS ±0.98' / 0.3 m Horizontal with Vision Positioning ±4.92' / 1.5 m Horizontal with GPS Flight Control System GNSS Support GPS, GLONASS 3D Object Detection Operating Range 36.1 to 131.2' / 11.0 to 40.0 m Required Object Reflectivity >20% Vision System Vision System Downward, Forward, Backward, Left, Right Operating Range 1.6 to 131.2' / 0.5 to 40.0 m Obstacle Sensory Range 36.1 to 131.2' / 11.0 to 40.0 m Forward Field of View 40° (Horizontal) 70° (Vertical) Backward Field of View 60° (Horizontal) 77° (Vertical) Operating Environment Surface with Clear Patterns at >15 lux Remote Controller / Transmitter Operating Frequency 2.4 GHz (2.400 - 2.483) 5.8 GHz (5.725 - 5.850) Maximum Operating Distance 4.97 mi / 8000 m at 2.4 G 4.97 mi / 8000 m at 5.8 G Transmitter Power 26 dBm (2.4 G) 26 dBm (5.8 G) Connectivity 1 x Lightning 1 x Micro-USB 1 x USB Type-C Battery Type 1 x Built-In Battery Chemistry Lithium-Ion Battery Capacity 3950 mAh Battery Configuration 1 S / 3.83 V Mobile Device Compatibility Devices up to 6.30" / 160 mm Wide and 0.3" / 7.62 mm Thick Operating Temperature 32 to 104°F / 0 to 40°C Camera Sensor 1" CMOS Effective Pixels 20 MP Lens Field of View 77° Aperture f/2.8 - 11 Minimum Focusing Distance 3.3' / 1.0 m Photo ISO Range 100 - 3200 (Auto) 100 - 12,800 (Manual) Video ISO Range 100 - 6400 (Auto) Electronic Shutter Speed 8 - 1/8000 Second Photo Resolution 3:2: 5472 x 3648 Photo Format JPEG, DNG Video Format 3840 x 2160p at 24/25/30 fps 2688 x 1512p at 24/25/30/48/50/60 fps 1920 x 1080p at 24/25/30/48/50/60/120 fps Recording Media microSD (up to 128 GB) Photo Modes Auto-Exposure Bracketing (AEB), Burst Shooting, Interval, Single Shot Gimbal Number of Axes 3 (Pitch, Roll, Yaw) Control Range Pitch: -90 to 30° Yaw: -75 to 75° Angular Speed Pitch: 120°/s Flight Battery Battery Chemistry Lithium-Ion Polymer (LiPo) Capacity 3850 mAh / 59.29 Wh Battery Configuration 4 S / 15.4 V Maximum Charging Power 80 W Charging Temperature 41 to 104°F / 5 to 40°C Weight 10.48 oz / 297 g Charger AC Input Power 100 to 240 VAC, 50 / 60 Hz at 1.8 A Output Voltage 17.6 V, 3.41 A 17 V, 3.53 A 5 V, 2 A Power Rating 60 W
Key Features Micro Four Thirds Sensor with MFT Mount DCI 4K (4096 x 2160) Video Capture 16MP Still Photos Over 12 Stops of Dynamic Range Equip your DJI Inspire 1 with Micro Four Thirds imaging performance and the benefits of an interchangeable lens system with the Zenmuse X5R RAW Camera and 3-Axis Gimbal with 15mm f/1.7 Lens. This 4K camera system features an integrated 3-axis brushless gimbal that provides stabilization and enables the camera to move independently of the aircraft. In addition to video, the camera can take 16-megapixel still photos with the option for burst and time-lapse modes. 12.8 stops dynamic range for enhanced highlight and shadow detail H.264 and Cinema DNG RAW video recording Records video and stills to micro-SDHC/SDXC cards or SSD Drives (SSD required for RAW video capture) Single shot or take bursts for 3, 5, or 7 frames Time-lapse mode captures photos at stepped intervals between 3 and 60 seconds Program, Aperture Priority, Shutter Priority, and Manual exposure modes IN THE BOX DJI Zenmuse X5R RAW Camera and 3-Axis Gimbal with 15mm f/1.7 Lens DJI Zenmuse X5R RAW Camera and 3-Axis Gimbal DJI 512GB SSD for Zenmuse X5R Camera DJI MFT 15mm f/1.7 ASPH Prime Lens
With the iBubble Premium Edition, get everything you need to make your trips unforgettable. With its exclusive Premium Explorer Pack, including a dedicated remote and 100m/300ft of cable, you will be able to explorer further into the depths. Travel anywhere in the world with the iBubble hardcase and dive all day long with 2 extra batteries and 2 battery chargers.
Key Features Works with Zenmuse Gimbals / Cameras Works with Ronin-MX Gimbal Up to 34 Pound Total Take-Off Weight Integrated Lightbridge 2 Support DJI Matrice 600 Pro Performance Maximum Speed Horizontal (No Wind): 40 mph / 65 km/h Ascent: 16.4 ft/s (5 m/s) Descent: 9.8 ft/s (3 m/s) Maximum Wind Resistance 26.2 ft/s (8 m/s) Maximum Altitude Above Sea Level: 8202.1' / 2500 m Hovering Accuracy P-Mode with GPS: Vertical: ±1.6' / 0.5 m Horizontal: ±4.9' / 1.5 m Maximum Angular Velocity Pitch: 300°/s Yaw: 150°/s Maximum Pitch Angle 25° Hovering Time Six TB47S Batteries: No payload: 32 minutes 13.2 lb / 6 kg Payload: 16 minutes Six TB48S Batteries: No payload: 38 minutes 12.1 lb / 5.5 kg payload: 18 minutes Note: Hovering time is based on flying at 32.8' / 10 m above sea level in a no-wind environment and landing with 10% battery level. Takeoff Weight 34.1 lb / 15.5 kg Flight Ceiling 8202.1' / 2500 m above sea level Flight Control System Model A3 Pro Transmitter (Remote Controller) Frequency 5.725 to 5.825 GHz 2.400 to 2.483 GHz Communication Distance 3.1 miles / 5 km Transmitter Power 13 dBm at 5.8 G 20 dBm at 2.4 G Connectivity 1 x HDMI 1 x SDI 1 x USB Dual User Capability Master-and-slave control Output Power 9 W Operating Temperature 14 to 104°F / -10 to 40°C Battery Type: Built-in Chemistry: Lithium-ion polymer (LiPo) Capacity: 6000 mAh Configuration: 2S Storage Temperature < 3 Months: -4 to 113°F / -20 to 45°C > 3 Months: 72 to 82°F / 22 to 28°C Charging Temperature 32 to 104°F / 0 to 40°C Mobile Device Holder Supports smartphones and tablets Maximum Device Width: 6.7" / 170 mm Gimbal Supported Gimbals Zenmuse X Series: X3, X5 & X5R, XT Ronin Series: Ronin-MX Zenmuse Z30 Zenmuse Z15 HD Series: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4 Flight Battery Model TB47S Chemistry Lithium-ion polymer (LiPo) Capacity 4500 mAh / 99.9 Wh Configuration 6 S Weight 1.3 lb / 595 g Maximum Charging Power 180 W Operating Temperature 14 to 104°F / -10 to 40°C Charging Temperature 41 to 104°F / 5 to 40°C Storage Temperature < 3 Months: -4 to 113°F / -20 to 45°C > 3 Months: 72 to 82°F / 22 to 28°C Charger Model: MC6S600 Voltage Output: 26.1 V Power Rating (Total): 600 W Power Rating (Per Battery): 100 W Motor Model DJI 6010 Propeller Model DJI 2170 General Operating Temperature 14 to 104°F / -10 to 40°C Diagonal Wheelbase 44.6" / 1133 mm Dimensions Propellers, Frame Arms, and GPS Mount Unfolded: 65.7 x 59.8 x 28.6" / 1668 x 1518 x 727 mm (including landing gear) Frame Arms and GPS Mount Folded: 17.2 x 15.8 x 21.8" / 437 x 402 x 553 mm (excluding landing gear) Weight Six TB47S Batteries: 20.9 lb / 9.5 kg Six TB48S Batteries: 22 lb / 10 kg Packaging Info Package Weight 43.7 lb Box Dimensions (LxWxH) 26.614 x 20.709 x 19.291"
Key Features Compatible with 5.2K Gimbal Cameras CineCore 2.0 Image Processing Includes CinemaDNG/ProRes Record License Advanced Obstacle Sensing DJI Inspire 2 Quadcopter With CinemaDNG And Apple ProRes Licenses Performance Takeoff Weight Maximum: 8.82 lb / 4 kg Maximum Flight Altitude Standard Propellers: 8200' / 2500 m Hi-Altitude Propellers: 16,400' / 5000 m Maximum Flight Time 27 minutes (approx.) with Zenmuse X4S Gimbal Camera Maximum Tilt Angle P-mode: 35° (Forward Vision System enabled: 25°) A-mode: 35° S-mode: 40° Maximum Ascent Speed P-mode/A-mode: 16.4 ft/s (5 m/s) S-mode: 19.7 ft/s (6 m/s) Maximum Descent Speed Vertical: 13.1 ft/s (4 m/s) Tilt: 13.1-29.5 ft/s (4-9 m/s) Maximum Speed 58 mph (94 km/h) GPS Accuracy Vertical: ±1.64' / 0.5 m (±0.33' / 0.1 m, with Downward Vision System enabled) Horizontal: ±4.92' / 1.5 m (±0.98' / 0.3 m, with Downward Vision System enabled) Downward Vision System Velocity Range < 32.8 ft/s (10 m/s) at height of 6.56' / 2 m Altitude Range < 32.8 feet / 10 m Operating Range < 32.8 feet / 10 m Operating Environment Surfaces with clear patterns and adequate lighting (> 15 lux) Upward Infrared Sensor Obstacle Sensory Range 0-16.4' / 0-5 m Field of View &plusm;5° Operating Environment Large-size non-reflective obstacles Forward Vision System Obstacle Sensory Range 2.3-98.4' / 0.7-30 m Field of View Horizontal: 60° Vertical: 54° Operating Environment Surfaces with clear patterns and adequate lighting (> 15 lux) Transmitter Operating Frequency 2.400-2.483 GHz, 5.725-5.850 GHz Maximum Transmission Distance 2.4 GHz: 4.3 mi / 7 km 5.8 GHz: 4.3 mi / 7 km EIRP 2.4 GHz: 26 dBm 5.8 GHz: 28 dBm Battery Type: Built-in Chemistry: Lithium-ion polymer (LiPo) Capacity: 6000 mAh Configuration: 2S Output Power 9 W USB Power iOS: 5.2 VDC, 1 A (maximum) Android: 5.2 VDC, 1.5 A (maximum) Operating Temperature 14 to 104°F / -10 to 40°C Battery Chemistry Lithium-ion polymer (LiPo) Capacity 4280 mAh / 97.58 Wh Configuration 6 S Voltage 22.8 VDC Weight 1.1 lb / 515 g Charger Voltage: 26.1 V Rated Power: 180 W Environmental Charging Temperature: 41 to 104°F / 5 to 40°C Operating Temperature: 14 to 104°F / -10 to 40°C Maximum Charging Power 180 W General Operating Temperature 14 to 104°F / -10 to 40°C Dimensions Diagonal: 23.8" / 60.5 cm (excluding propellers; Landing Mode) Weight 7.25 lb / 3.3 kg (including two batteries, without gimbal and camera) Packaging Info Package Weight 26.2 lb Box Dimensions (LxWxH) 25 x 25 x 12" DJI Zenmuse X5S Packaging Info Package Weight 2.58 lb Box Dimensions (LxWxH) 7.4 x 5.75 x 5.65"
Fiber Laser Cutting Machine Power - 1000watt Table Size: 3000mm * 1500mm Laser Source : IPG - Germany Auto Focusing Cutting Head Cutting Parameter: Carbon Steel - upto 12 mm Stainless Steel : Upto 6 mm Aluminium : upto 3 mm
The product uses German Evonik special DEGAROUTE road marking special resin to optimize the coating formula. It adopts the company's unique two-component marking paint coating technology. The formula design adopts double sparse micro-table technology and the marking coating is introduced. The charge repelling technology improves the dust-repellent performance of the coating and maintains high anti-fouling performance for a long time. This product has obtained a patent certificate, certificate number: ZL 2010 1 0154496.X
Product model IK-CBL-A001 Image sensor 1/3 Progressive Scan CMOS Processor T10L+SC1235 Built in lens 1.44mm,360 degrees fisheye lens Working temperature 0 -60 Manual video format MP4(1280*960P,storage in mobile) Video frame rate Maximum 25 frames Video compression standard H.264(Storge in TF card ) Alarm action Mobile client push screenshot Audio compression standard G.711(Storge in TF card ) Video playback mode Mobile APP View Angle 360 degrees Supply voltage AC 100ï½?240V Audio input and output Input:built in microphone;output:built-in speaker Net weight 93g Local storage TF card, maximum support 128G User settings Max share to 5 users Support multiple protocols TCP/UDP/IP/HTTP/SMTP/DHCP/DDNS/UPNP/NTP Power consumption
The knife cutting method is ideal to keep balance among pollution free, no smelly work environment, boosting production capacity, saving labour cost and cost effective. With steady smooth edge cutting performance, high flexible, high material utility and reasonable price, knife cutting solution free tailors from prototyping and short run production.
It can be used for non-metal and thin metal processing. Widely used in advertising industry, handicraft industry, toys, clothing, construction, packaging, paper, etc. Applicable materials: stainless steel, carbon steel, acrylic, MDF board, clothing, leather, paper, etc. Working Size: 1300*900mm Laser Type : CO2 Laser Tube Laser Power : 150W/180W/280W/300W Control System : DSP Offline / USB Compatible Software : Autocad/Coreldraw/Photoshop Voltage : 220V/50Hz(110V/60Hz)
It can be used for non-metal and thin metal processing. Widely used in advertising industry, handicraft industry, toys, clothing, construction, packaging, paper, etc. Applicable materials: stainless steel, carbon steel, acrylic, MDF board, clothing, leather, paper, etc. Working Size: 1300*900mm Laser Type : CO2 Laser Tube Laser Power : 150W/180W/280W/300W Control System : DSP Offline / USB Compatible Software : Autocad/Coreldraw/Photoshop Voltage : 220V/50Hz(110V/60Hz)
This machine is suitable for different kinds of textile, especially Seamless bonding fabric. It can do accurate cutting on different kinds of textile, fabrics in random figure. It adopt crawler working table and negative pressure absorb conveyor, make sure the smooth of materials when cutting. Working with auto feeding system, can meet the requirements for continous and automatic batch cutting
It can be used for non-metal and thin metal processing. Widely used in advertising industry, handicraft industry, toys, clothing, construction, packaging, paper, etc. Applicable materials: stainless steel, carbon steel, acrylic, MDF board, clothing, leather, paper, etc.
New design, High quality with competitive price. Widely used for Model industry(construction models, aviation and navigation models and wooden toys), advertising, decoration, arts and crafts, electronics, and electric appliances, etc.
