Techwin single-mode CW fiber lasers with high power output
www dot techwin-china dot com
We will try our best to provide products similar to keopsys fiber laserï¼? NKT Photonics fiber laserï¼?NP Photonics fiber laserï¼?IPG Photonics fiber laserï¼?BKtel Photonics fiber laser.
Techwin 1.0μm single-mode CW fiber lasers of are a highly integrated continuous Yb-doped fiber laser system with high power output. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser. The output power can be up to 20W and near diffraction-limited beam quality is achieved at the same time. They can be widely used in the areas of scientific research, experimental teaching and device testing.
Techwin 1.0μm single-mode CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, Techwin can offer modularized package according to the user`s requirements.
Techwin 1.0μm Single Mode CW Fiber Lasers for Test and Measure www.techwin-china.com we try to supply fiber laser similar to keopsys fiber laser,NKT Photonics fiber laser,NP Photonics fiber laser,IPG Photonics fiber laser,BKtel Photonics fiber laser Product Overview: Techwin 1.0μm single-mode CW fiber lasers of are a highly integrated continuous Yb-doped fiber laser system with high power output. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser. The output power can be up to 20W and near diffraction-limited beam quality is achieved at the same time. They can be widely used in the areas of scientific research, experimental teaching and device testing. Techwin 1.0μm single-mode CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, Techwin can offer modularized package according to the user`s requirements. Features: � High output power�up to 50W � Excellent beam quality � High Stability and reliable performance � Single-mode output�PM optional Applications: � Test and measure � Scientific research � Spectroscopy analysis � Other lab applications
Techwin CW fiber laser for science research www dot techwin-china dot com We will try our best to provide products similar to keopsys fiber laser, NKT Photonics fiber laser, NP Photonics fiber laser, PG Photonics fiber laser, BKtel Photonics fiber laser. Techwin CW fiber lasers Product Description: Techwin 1.5μm CW fiber lasers are eye-safe high power fiber lasers. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser. The output power can be up to 10W and near diffraction-limited beam quality is achieved at the same time. They can be widely used in the areas of scientific research, experimental teaching and device testing. Techwin 1.5μm CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, our company can offer modularized encapsulation according to the user`s requirements. Application of Techwin single-mode fiber laser: � Fiber optical communication � Free-space communication � Fiber optical sensing � Test and measure � Science research Techwin single-mode fiber lasers Feature: � High output power�up to 10W � excellent beam quality � high Stability and reliable performance � All-fiber structure � Single-mode output�PM optional
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
POM regrind black color full container available POM plastic possesses the same priority features as other plastic polymers, some of the highlights of the special resin: High hardness Bearing good Low friction number High resistance to abrasion High temperature resistant Less water intake Has anti-static ability Dimensional stability, little change Less smoke burns when burning High glossy surface High crystallization In addition to the priority points, POM plastic also has some limited formats such as: Quality acid resistance and alkali High hatch rate when changing secretions Operation mode Heat range MATERIAL: POM regrind black color full container available CATEGORY: POM TYPE: Regrind GRADE: Black color SPECIFICATION: 1 full container available Origin: Tunisia LOADING WEIGHT: 23 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days
Vidhya Ispat Udyog offers a diverse range of CNC laser cutting parts crafted with precision and expertise to meet the exacting standards of modern industrial applications. Utilizing state-of-the-art CNC technology, our laser cutting process ensures unparalleled accuracy and consistency in every component produced. Our CNC laser cutting parts are manufactured from premium-grade materials, guaranteeing superior durability, strength, and precision. Whether you require intricate designs, complex shapes, or high-volume production, our CNC laser cutting capabilities enable us to deliver solutions tailored to your specific requirements. From sheet metal components to structural elements, our CNC laser cutting parts find applications across various industries, including automotive, aerospace, electronics, and more. Trust Vidhya Ispat Udyog for high-quality CNC laser cutting parts that deliver exceptional performance, reliability, and efficiency in every application.
1080nm cw fiber laser, 300w for metal cutting, welding, drilling, 3d pringting, ets. Features and advantages: 1.Extremely high power stability (power fluctuation less than 0.4%) 2.Good beam quality:m2
Olympus CV-170 Video Processor and LED Light Source You can only treat what you can see. HD videoscopes have quickly become the standard in many ENT procedures due to the ability to examine mucosal patterns with greater clarity than traditional fiber or SD videoscopes. For the first time ever, HD laryngoscopy is now available to the patients who need it most at the point where it is most valuable: diagnostic laryngoscopy in the office. With LED light, HD scope support, and Narrow Band Imaging (NBI) built into one, compact box, the CV-170 provides physicians with exceptional diagnostic tools at an affordable price for any office.
Techwin pulsed fiber laser for LiDAR and 3D scanning wwwdottechwin-chinadotcom We will try our best to provide products similar to keopsys fiber laser, NKT Photonics fiber laser, NP Photonics fiber laser, PG Photonics fiber laser, BKtel Photonics fiber laser. You probably see us at following exhibitions: Laser Korea, OPTO Taiwan, SPIE Photonics West USA, Photomix Japan and so on. Product Description: Techwin CKLID series 1030nm pulsed fiber laser is a laser source delivering high peak power and high pulse energy. Using MOPA configuration and all- fiber optimized design, the laser can offer the high peak power and the near diffraction-limited quality output beam. Techwin CKLID series 1030nm pulsed fiber laser employs module package with compact and rugged design, integrated with external trigger and synchronization output monitor. It is easily deployed and maintenance-free, ensuring a long- life and cost-effective operation. The user also can adjust pulse width and repetition rate of the laser by connecting computer. It is quite suitable for system integration. Features: � High peak power: up to 4kW � Average power: up to 1W � Repetition rate adjustable � Pulse energy: up to 10μJ � Excellent beam quality Applications: � LiDAR � 3D scanning � Range finding � Target detection � Telemetry