IRceL CH4 NDIR CH4 Sensor Description Miniature infrared sensor with on-board EEPROM and thermistor IRceL CH4 NDIR CH4 Sensor Key Features & Benefits: * Integrated thermistor for accurate temperature compensation * EEPROM programmed with sensor specfic performance characteristics * Compact Size IRceL CH4 NDIR CH4 Sensor Technical Specifications * Operating Principle: Non-Dispersive Infra-Red * Measurement Range: 0-5% vol. Methane * Accuracy (-20'C to +50'C): Within ± (0.1% vol CH 4 + 4% of concentration)â?? * Response Time (T90): < 35 Seconds * Supply Voltage: 3-5 VDC, 3.3 V to utilise EEPROM calibration * MTBF: > 5 years -
MICROceL CF Carbon Monoxide Sensor (CO sensor) Description MICRO 3-electrode carbon monoxide sensor with inboard filter. MICROceL CF Carbon Monoxide Sensor (CO sensor) Key Features & Benefits * A robust carbon monoxide sensor suitable for portable life safety applications * Extremely small size MICROceL CF Carbon Monoxide Sensor (CO sensor) Technical Specifications * Operating Principle: 3-electrode electrochemical * Measurement Range: 0-500 ppm CO * Sensitivity: 0.045 ± 0.01 uA/ppm * T50 Response Time: -
MB7040 I2CXL-MaxSonar-WR High Performance Ultrasonic Precision Rangefinder MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Product Description Weather Resistant (IP67) Sensors, and Optional Chemical Resistance The industrial outdoor I2CXL-MaxSonar-WR sensors have a robust PVC housing designed to meet IP67 water intrusion. The sensors provide short to long distance detection and ranging with a narrow beam pattern. The I2CXL-MaxSonar-WR outdoor ultrasonic sensors have high power output, noise rejection, auto calibration, and factory calibrated beam patterns. In addition to the standard I2CXL-MaxSonar-WR, has developed the Fâ??Option for additional protection necessary in a few hazardous chemical environments. Extremely corrosive gases or liquids can degrade or compromise the operation of the sensing unit. As a result, we offer a more chemically inert seal which allows our sensors to operate in all but the harshest of chemical environments. In addition to the chemical resistance the sensor has improved performance in wet or dust environments. MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Product Specifiations * Resolution of 1 cm * Up to 40Hz reading rate * RoHS Compliant * Operates from 3.0-5.5V * IP67 rated, I2C interface ultrasonic sensor * Maximum range of 765 cm (300 inches) * Operational Temperature from -40'C to +70'C MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Features and Benefits * Low power consumption * Narrow, controlled beam * Easy to use interface * Detects smaller objects * Can be powered by many different types of power sources MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Applications and Uses * People detection * Security * Motion detection * Useable with battery power * Autonomous navigation * Educational and hobby robotics * Collision avoidance -
SONIC-ANEMO-MICRO Ultrasonic Wind Speed Sensor Description: As a result of its very special electronic architecture the SONIC-ANEMO-MICRO shows a very low electrical consumption. It is ideal for remote stations or mobile installation. SONIC-ANEMO-MICRO is an OEM sensor designed for integration in other original Equipment. This sensor shows a very low consumption. It operates from 300µA. SONIC-ANEMO-MICRO is the lowest consumption power solution of all LCJ sensors. SONIC-ANEMO-MICRO Ultrasonic Wind Speed Sensor Specification: Output data format: ASCII format, avaibility Information transmited: Instant. W. Speed, Instant. W. Angle, avaibility Output rate: select. 1 meas. and Tx: every 1,6 or 18 s Wind module sensitivity: 0.12 m/s Wind module resolution: 0.05 m/s Wind module dynamic: 0.12 to 40 m/s Direction sensitivity: +/-1.5 degree Direction resolution: 1 degree Power supply: 3 V to 3.6 V DC Electrical consumption: 200µA avg Op. temp. without icing: -15 degree C to +50 degree C Cable: 50 cm / 4x0.22 mm2 Connection: 4 wires Weight of the head: 100 gr Weight of unit assembly: N/A Mounting: N/A
CV7-V Ultrasonic Wind Speed Sensor Description The CV7 is easily integrated into measurement and monitoring systems. The CV7-V is powered by 8-30 VDC power supply and it outputs RS232/RS422 (5V level signal) / NMEA0183. CV7-V Ultrasonic Wind Speed Sensor Application Static wind sensor A conventional wind vane/anemometer features mechanical rotating parts. These moving parts expose the sensor to failure. CV7 series was extensively tested in Marine applications for both precision and robustness. Configurable wind sensor CV7-V can be programmed and configured for : angle correction, smoothing time constant, units of measurement and interface format. CV7-V connexion CV7-V can be used connected to a PC and any systems featuring an NMEA® input port and specific pieces of equipment using conventional formats. In PC mode, this bidirectional sensor can be set up for angle correction, damping, measure units and interface format. Quality All LCJ Capteurs are designed and manufactured in the Nantes region in France where they are fully tested throughout the manufacturing process. CV7-V Ultrasonic Wind Speed Sensor Specification: Output data format: NMEA0183; MWV, XDR Information transmited: Instant. W. Speed, Instant. W. Angle, avaibility Output rate: 2 Hz / 30 Hz measurement Wind module sensitivity: 0.12 m/s Wind module resolution: 0.05 m/s Wind module dynamic: 0.12 to 40 m/s Direction sensitivity: +/-1.5 degree Direction resolution: 1 degree Power supply: 8 V to 30 V DC Electrical consumption: 9 mA Op. temp. without icing: -15 degree C to +55 degree C Cable: 25 m / 4x0.22 mm2 Connection: 4 wires Weight of the head: 100 gr Weight of unit assembly: 200 gr with mounting part Mounting: Vertical ; 300 aluminium arm, 16 mm
MB1444 USB-ProxSonar-EZ4 High performance USB ultrasonic proximity detection sensor MB1444 High Performance USB Ultrasonic Sensor Product Description The USB-ProxSonar-EZ4 has a detection zone of ~1 feet and will allow for 15+ simultaneous sensors. These ultrasonic proximity sensors detect objects in a calibrated detection zone. The USB-ProxSonar-EZ sensors report when an object (such as a person) enters the detection zone. The target is released after leaving the USB-ProxSonar-EZ detection zone. MB1444 High Performance USB Ultrasonic Sensor Product Specifications * USB interface * ~2.5 second target acquire time* * ~1.5 second target release time* * Automatic multi-sensor operation * People sensor * Resolution of 1 inch * Maximum Range of 125 inches (318 cm) * Detection zone range of 12 inches (30 cm) * 42kHz Ultrasonic sensor measures distance to objects * RoHS compliant * Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches * Small, light weight module * Designed for easy integration into your project or product * Short range detection
1. Biolight Adult Finger clip Spo2 sensor,7pin 2. Connector: Round 12 pins; 3. Compatble models: Biolight digital monitor M7000,M8000, M9000,M9500 4. Cable materials: TPU 5. We also can offer Biolight digital monitor A3,A5,A6,A8. 6. Types:Adult finger clip SpO2 sensor, Adult Silicone Soft Rubber SpO2 sensor, Pediatric Clip SpO2 sensor, Pediatric Silicone SpO2 sensor, Neonate Wrap SpO2 sensor, Neonate Y type SpO2 sensor, Adult Ear Clip SpO2 sensor, Animal ear clip SpO2 sensor; 7. Related Products:Spo2 sensor, Spo2 Extension Cable, ECG Cable with leadwires, IBP Cable, Disposable Transduer, NIBP Cuff, NIBP Tube, Temperatrue Probe.
1.4 frequencies selectable for long distance and stacking installation 2.Double-precision digital display signal strength 3.Interruption time adjustable, user can adjust it according to environment and scenes 4.Intelligent heating function, effectively eliminate ice and frost, adapt to harsh environment 5.Progressively infrared signal processing functions (comparable with AGC function) to ensure the item work in wind,frost,snow,fog,moisture,direct sunlight and other bad weather etc. 6.Digital CPU control circuit to control the transmitter and receiver 7.Optional assisting equipment for alignment infrared beam, improving the efficiency 8.Wide range voltage design, power supply between AC/DC12-24V,easy for centralized power supply. 9.A variety of applications C relay outputs 10.Tamper switch, open if the cover is removed 11.Waterproof grade: IP65 12.Alignment angle horizontally ±90ï¼?vertically ±10
Innovative Weather Monitoring Especially ideal for mobile installations, Magellan MX Weather Stations combine the convenience of an all-in-one multi-parameter weather sensor with an internal compass and GPS. Four different models offer sensor options including: * Ultrasonic wind speed and direction measurement * A combined temperature, pressure, humidity instrument mounted inside three double louvered, naturally aspirated radiation shields * Optical rain gauge provides measurements based on the size and number of drops MX600: rain gauge, ultrasonic wind speed and direction, temperature, relative humidity, air pressure, compass, GPS MX500: ultrasonic wind speed and direction, pressure, temperature, relative humidity, compass, GPS MX300: pressure, temperature, relative humidity (no compass or GPS) MX200: ultrasonic wind speed and direction only, compass, GPS Magellan MX Weather Stations Feature * Weather-protected sensor unit designed for maximum portability and utility * GPS for compensated wind speed * Automatic self-alignment of wind direction using internal compass * No mechanical components means virtually no maintenance * Low power consumption ideal for battery or solar-powered installations * One-year warranty Sensor Specifications Temperature Range: -40 to +70'C (-40 to +185'F) Accuracy: ±0.3'C (20'C); ±0.54'F (68'F) Resolution: 0.1'C (0.18'F) Units: 'C, 'F Barometric Pressure Range: 8.85 - 32.48 inHg (300 - 1100 hPa) Accuracy: ±0.015 inHg (±0.5 hPa) @ 77'F(25'C) Resolution: 0.003 inHg (0.1 hPa) Units Available: kPa, hPa, mbar, inHg Wind Speed Range: 0-134mph (0-60 m/s) Accuracy: ±3% 0.02 mph to 90 mph (±3% 0.01m/s to 40 m/s), ±5% above 90 mph and up to 134 Resolution: 0.02 mph (0.1 m/s) Units Available: knots, mph, km/hr, m/s Wind Direction Range: 0 to 359' Accuracy:± 3' 0.02 mph to 90 mph (0.01 m/s to 40 m/s), ±5' above 90 mph and up to 134 mph (40 m/s and up to 60 m/s) Resolution: 1.0' Relative Humidity Range: 0 to 100% Accuracy: ± 2% @ 68'F (10%-90% RH) Resolution: 1.0% Precipitation Accuracy:±2% at
Features * oxygen pressure range 2 mbar - 3bar * zirconium dioxide (zro2 ) sensing elements * non-consumption technology * integral heating element * no need for temperature stabilisation * no reference gas required * high accuracy * linear output signal * operates with external interface boards Specifications Heater voltage: Porous cap (15mm): 4.35v dc +/- 0.1v dc (1.85a) Stand by: 2v dc (0.85a) Pump resistance @ 700'C: < 6kOhm Permissible gas temperature: -100 to 250C Gas flow rate: 0 to 10 m/s Repetitive permissible acceleration: 5 g Incidental permissible acceleration: 30 g
Dust Sensor Module DSM501B Description Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor. PWM output of the sensor can be directly connected to μ-com to control fan speed or ventilation and also to display the level of particles. Detectable size of particle is limited to minimum 0.7 μm, and the application for smoke or fire alarm is prohibited. Dust Sensor Module DSM501B Type: DSM501A : 2mm pitch connector type (20010WR-05). DSM501B : 2.5mm pitch connector type (S5B-EH). Dust Sensor Module DSM501B Electrical characteristics: Supply voltage: DC5V +/- 10% Power consumption: 90mA Operating temperature range: -10~ +65'C Operating humidity range: 95%RH or less (without dew condensation) Recommend storage condition: -20~ +80'C Dimension: W59 * H45 * D20 (mm) Detectable particle size: approx. 1um (minimum) Detectable range of concentration: 0 ~ 1.4mg/m3 Output signal: PWM (pulse width modulation) Time for stabilization: 1 minute after power turned on Sensor characteristics: To be maintained in between the upper limit and lower limit of the standard dust sensor unit Dust Sensor Module DSM501B Features: * PWM output * Easy installation * Single power supply * Compact size and lightweight Dust Sensor Module DSM501B Application: * Ventilator etc * Air conditioner * Air quality monitor * Air cleaner or Air purifier
MB7389 HRXL-MaxSonar-WRMT High Performance Ultrasonic Precision Rangefinder High Performance Ultrasonic Precision Rangefinder MB7389 Product Description The HRXL-MaxSonar-WRMT ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications. High Performance Ultrasonic Precision Rangefinder MB7389 Features and Benefits * Factory calibrated beam width * Low operating voltages from 2.7V to 5.5V * All range outputs are active simultaneously * Superior clutter rejection High Performance Ultrasonic Precision Rangefinder MB7389 Applications and Uses * Bin Level Measurement * Tank Level Measurement
Water Leak Detection Sensors are widely used in Telecommunication Outdoor Base Stations, Elevator Shafts, Electric Vehicle Charging Stations and Electric Distributors. When leakage happen in the above equipment and the 2 electrodes of the sensor are immersed in water at the same time, the sensor will trigger the alarm system with which is connected. Application:underground,plant room,etc,used for detecting water leakage. Setup:on ground/wall with screw Detection:Water leakage with LED lamp Materials:Nylon fibre/Alluminium Alloy Origin:China
What's the introduction of Micro Oval Gear Flow Meter ? Micro Oval Gear Low Flow Meter is a kind of oval gear flow meter ,along to positive displacement flow meter. there is thousands of manufacturers who can produce oval gear flow meter. but only several manufacturer who have technology to produce micro liquid flow meter. Micro Oval Gear Flow Meter offer the highest accuracy and measure for various viscosity liquid. special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro Oval Gear Low Flow Meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, Adhesive control ,Hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of Micro Oval Gear Flow Meter? 1) Anti-dust,anti-vibration,anti-corrosive&explosion-proof. 2) Max accuracy up to 0.2% 3) Min flow : 0.1ml/min 4) Max temperature: 200C 5) Max pressure: 1000bar 6) Viscosity liquid:0.3~10000cps.
What's the introduction of Micro Oval Gear Flow Meter ? Micro Oval Gear Low Flow Meter is a kind of oval gear flow meter ,along to positive displacement flow meter. there is thousands of manufacturers who can produce oval gear flow meter. but only several manufacturer who have technology to produce micro liquid flow meter. Micro Oval Gear Flow Meter offer the highest accuracy and measure for various viscosity liquid. special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro Oval Gear Low Flow Meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, Adhesive control ,Hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of Micro Oval Gear Flow Meter? 1) Anti-dust,anti-vibration,anti-corrosive&explosion-proof. 2) Max accuracy up to 0.2% 3) Min flow : 0.1ml/min 4) Max temperature: 200C 5) Max pressure: 1000bar 6) Viscosity liquid:0.3~10000cps.
MS5534C Barometer Module SPECIFICATIONS * 10 - 1100 mbar absolute pressure range * 6 coefficients for software compensation stored on-chip * Piezoresistive silicon micromachined sensor * Integrated miniature pressure sensor 9 x 9 mm * 16 Bit ADC * 3-wire serial interface * 1 system clock line (32.768 kHz) * Low voltage and low power consumption Description: The MS5534C is a SMD-hybrid device including a piezoresistive pressure sensor and an ADC-Interface IC. It provides a 16-bit data word from a pressure and temperature dependent voltage. Additionally the module contains 6 readable coefficients for a highly accurate software calibration of the sensor. MS5534C is a low power, low voltage device with automatic power down (ON/OFF) switching. A 3-wire interface is used for all communications with a microcontroller. The MS5534C is fully software compatible to the previous versions (MS5534A and MS5534B). Compared to the previous versions, the ESD sensitivity level has been improved to 4kV on all pins. Features: * Supply voltage 2.2 V to 3.6 V * Low supply current * -40'C to +125'C operation temperature * No external components required Applications: * Mobile altimeter/barometer systems * Weather control systems * Adventure or multi-mode watches * GPS receivers
MS8607-02BA01 PHT Combination Sensor SPECIFICATIONS * Integrated pressure, humidity and temperature sensor * QFN package 5 x 3 x 1 mm3 * Operating range: 10 to 2000 mbar, 0%RH to 100%RH, -40 to 85 'C * High-resolution module: 0.016 mbar, 0.04%RH, 0.01'C * Supply voltage: 1.5 to 3.6 V * Fully factory calibrated sensor * I2C interface DESCRIPTION The MS8607 is the novel digital combination sensor of MEAS providing 3 environmental physical measurements all-in-one: pressure, humidity and temperature (PHT). This product is optimal for applications in which key requirements such as ultra low power consumption, high PHT accuracy and compactness are critical. High pressure resolution combined with high PHT linearity makes the MS8607 an ideal candidate for environmental monitoring and altimeter in smart phones and tablet PC, as well as PHT applications such as HVAC and weather stations. This new sensor module generation is based on leading MEMS technologies and latest benefits from Measurement Specialties proven experience and know-how in high volume manufacturing of sensor modules, which has been widely used for over a decade. FIELD OF APPLICATION * Smart phones and Tablet PCs * HVAC applications * Weather station * Printers * Home Appliance and humidifiers
MS1451 Description: The MS1451 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration. It is intended for high volume applications where small size, light weight, low cost, and compatibility with automated assembly equipment are required. The pressure sensor is available with a gage or absolute pressure sensing chip that is attached to a surface mountable ceramic substrate. A cap is attached to the ceramic substrate, protecting the chip and providing the pressure port. The devices are shipped in plastic anti-static shipping tubes for use with automated production equipment. Caps are also available with a narrow hole or a large hole to interface with the pressure media. Features: * PC Board Mountable Pressure Sensor * 0-60 mV Output * Gage and Absolute Pressure * Low Cost * Surface Mount Package * ±0.25% Pressure Non-linearity * 3 Pressure Port Options * Solid State Reliability * Low Power Applications: Altitude Measurement Barometric Pressure Medical Instrumentation Consumer Appliances Tire Pressure
HS1101LF - Relative Humidity Sensor * Lead free component * High reliability and long term stability * Patented solid polymer structure * Suitable for linear voltage or frequency output circuitry * Fast response time and very low temperature coefficient DESCRIPTION Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications such as office automation, automotive cabin air control, home appliances, and industrial process control systems. They are also useful in all applications where humidity compensation is needed. FEATURES * Full interchangeability with no calibration required in standard conditions * Instantaneous desaturation after long periods in saturation phase * Compatible with automatized assembly processes, including Pb free wave soldering and reflow processes * Individual marking for compliance to stringent traceability requirements * Part may be washed with distilled water. APPLICATIONS * Automotive * Home Appliance * Printers * Meteorology PERFORMANCE SPECS Operating Temperature: -60 to 140 °C Storage Temperature: -60 to 140 °C Supply Voltage (Peak): 10 Vac Humidity Operating Range: 0 to 100 % RH
Humidity Module HTG3513CH Voltage Output Humidity Sensor DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3513CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs. HTG3513CH is designed for high volume and demanding applications. FEATURES * Voltage Supply: 3.3 Vdc * Nominal Output @55%RH: 1.462~1.568 V * Humidity Average Sensitivity: +18 mV/%RH * Current consumption: 1.0 mA dc â?¢ Humidity Measuring Range: 0~100 %RH * Humidity Operating Range: 0~100%RH * Temperature Operating Range: -40 ~110'C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25'C * Humidity calibrated within +/- 3% RH @ 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations APPLICATIONS * Automotive * Home Appliance * Printers
