Sonic-anemo-sdi ultrasonic wind speed sensor description Sonic-anemo-sdi is made from the cv7-v to which a sdi12 protocol and optimizing electrical consumption has been added. Sample rate is 2 hz. This ultrasonic wind sensor operates in a request-response mode. This product is more energy-efficient than standard units. The sonic-anemo-sdi is dedicated to meteorological applications. Sonic-anemo-sdi ultrasonic wind speed sensor available data: - average speed and direction over 10 minutes - minimum wind speed and direction for that period - maximum wind speed (gust 3s) and direction for that period - software version and serial number - data measurement quality rate from the sensor - data for sensor diagnostic (manufacturer use only) Sonic-anemo-sdi ultrasonic wind speed sensor specification: * output data format: sdi-12 v1.3 * information transmited: inst. W. Speed, w. Angle, gust ws/wa, avg, min, max, avaibility * output rate: 2 hz / 30 hz measurement * wind module sensitivity: 0.12 m/s * wind module resolution: 0.05 m/s * wind module dynamic: 0.12 to 40 m/s * direction sensitivity: +/-1.5' * direction resolution: 1' * power supply: 2.7 v to 35 v dc * electrical consumption: 2.9 ma avg. @ 12 v * op. Temp. Without icing: -15'c to +55'c * cable: 5 m / 3 x 0.22 mm2 uv proof * connection: 3 wires * weight of unit assembly: 200 gr with mounting parts.
Mb1003 hrlv-maxsonar-ez0 High performance ultrasonic rangefinder Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder product description The hrlv-maxsonar-ez0 has the widest and most sensitive beam pattern of any unit from hrlv-maxsonar-ez sensor line. This makes the hrlv-maxsonar-ez0 an excellent choice for use where high sensitivity, wide beam, or people detection is desired. Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder product specifiations * resolution of 1-mm * 10hz reading rate * 42khz ultrasonic sensor measures distance to objects * rohs compliant * maximum range of 5000 mm (195 inches) * operates from 2.5v-5.5v * low 3.1ma average current requirement * operational temperature from 0'c to +65'c Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder features and benefits * factory calibrated wide beam width * low operating voltages from 2.5v to 5.5v * all range outputs are active simultaneously * high acoustic sensitivity * detects small targets to longer distances * widest beam width for the hrlv-maxsonar-ez sensors Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder applications and uses * people detection * small target detection * high sensitivity applications * obstacle avoidance.
Mb7137 i2cxl-trashsonar-wr High performance ultrasonic trash bin measurement Mb7137 i2cxl-trashsonar-wr ultrasonic sensor product description The mb7137 i2cxl-trashsonar-wr is a weather resistant sensor designed for trash bin measurement. The mb7137 i2cxl-trashsonar-wr features the i2c communication interface. This allows for up to 127 sensors to be operated on a single bus for a network of trash bins that are monitored by a single control device for multiâ??sensor operation. High output acoustic power combined with continuously variable gain, real-time background automatic calibration, real-time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electric noise sources. The i2cxl-trashsonar-wr sensors are factory calibrated to match narrow sensor beam patterns and provide reliable mid-range detection zones. Mb7139 is the standard version of this sensor. Mb7137 i2cxl-trashsonar-wr ultrasonic sensor product specifiations * resolution of 1 cm * up to 20hz read rate * 42khz ultrasonic sensor measures distance to objects * rohs compliant * operates from 3.0-5.5v * low 3.4ma average current requirement * maximum range of 350 cm (138 inches) * compatible with up to a 400khz i2c bus speed Mb7137 i2cxl-trashsonar-wr ultrasonic sensor features and benefits * real-time calibration, noise rejection and additional filtering provides stable range information * excellent for applications that require consistently accurate outputs * impressive acoustic and electrical noise resistance Mb7137 i2cxl-trashsonar-wr ultrasonic sensor applications and uses * autonomous navigation * environments with acoustic and electrical noise * bin level measurement * tank level measurement
Cv7-e ultrasonic wind speed sensor description The cv7-e is easily integrated into measurement and monitoring systems. Detects gusts with great responsiveness and low latency. The cv7-e is powered by 8-30 vdc power supply and it outputs rs232 / rs422 / 5 v level signal / nmea0183. The cv7-e shows a data rate twice faster than the cv7 and cv7-v with a data output 4 per second. The small size of this sensor makes it very discreet. Like every lcj capteurs products, cv7-e is energy efficient. Cv7-e has proved its value with universities â??laboratories, scientific and wind tunnels successful tests. It can be used connected to a pc and to any system featuring a nmeaâ® input port. Cv7-e ultrasonic wind speed sensor specification: * output data format: nmea0183, mwv, xdr * information transmited: instant. W. Speed, instant. W. Angle, avaibility * output rate: 4 hz / 60 hz measurement * wind module sensitivity: 0.12 m/s * wind module resolution: 0.05 m/s * wind module dynamic: 0.12 to 40 m/s * direction sensitivity: +/-1.5' * direction resolution: 1' * power supply: 8 v to 30 v dc * electrical consumption: 9 ma * op. Temp. Without icing: -15'c to +50'c * cable: 25 cm / 4 x 0.22 mm2, 20 g/m * connection: 4 wires * weight of the head: 100 gr * weight of unit assembly: 200 gr with mounting parts.
Y504-a dissolved oxygen sensor description The sensor is based on optical fluorescence lifetime quenching technique. Its technical procedure meets astm d888-09 standard for optical sensing of dissolved oxygen. This online sensor is developed to integrate with yosemite wireless monitoring system. Its rugged design and large measurement range make it ideal for sampling, flow cell, ground water and waste water measurements. Y504-a dissolved oxygen sensor applications Fish farmer, waste water plant, river, stream, and ocean monitoring Y504-a dissolved oxygen sensor feature , 0-20mg/l or 0-200% saturation , 0~50'c; ip68 rating , membraneless, no electrodes design , no oxygen consumption , flow independent , automatic temperature compensation , no h2s interference , low drift, fast response, and more accurate , low maintenance, low operating cost , easy sensor cap replacement , rs-485; modbus protocol compatible Y504-a dissolved oxygen sensor technical specifications , range, : 0-20mg/l or 0-200% saturation, , response time: 10 sec , housing ip rating: ip68, , accuracy: 1%, , drift:
Fecs40-1000 for the detection of carbon monoxide Figaro's carbon monoxide sensor fecs40-1000 is a unique electrochemical-type carbon monoxide sensor. Its most notable feature is its unique leak-proof structure, making it ideal for co monitors and detectors in various fields. Fecs40-1000 carbon monoxide (co) sensor features: * high sensitivity/selectivity to co * quick response to co * linear output * long life * stable baseline * unique leak-proof structure Fecs40-1000 carbon monoxide (co) sensor applications: * portable and fixed installation co monitors * co detectors * ventilation control for indoor parking garages Fecs40-1000 carbon monoxide (co) sensor specifications: Detection gas: carbon monoxide Detection range: 0 ~ 1000 ppm Maximum overload: 1500 ppm Output signal: 70±15 na/ppm Repeatability: ±2% Resolution: 1 ppm
3SP_O3_5 P O3 Sensor DESCRIPTION SPECâ??s printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. SPECâ??s printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size. 3SP_O3_5 P O3 Sensor BENEFITS * Small Size with Low Profile (20x20x3 mm) * Long Life (10 years expected life) * Fast Response (< 15 seconds) * Low Power Consumption * Individually Calibrated (NIST Traceable) * ROHS Compliant * Improved stability and ppb performance 3SP_O3_5 P O3 Sensor APPLICATIONS * Air Quality Monitoring * Industrial Safety * Air Purification Control 3SP_O3_5 P O3 Sensor SPECIFICATIONS * Measurement Range: 0 to 5 ppm * Lower Detection Limit: < 20 ppb (instrumentation dependent) * Resolution: < 20 ppb (instrumentation dependent) * Response Time: < 15 seconds typical * Sensitivity nA/ppm @ 5ppm: -60 +/- 10 nA/ppm * Expected Operating Life: > 5 years (10 years @ 23+/-3'C; 40+/-10% RH) * Operating Temperature Range: -30 to 50'C (-20 to 40'C continuous) * Operating Humidity Range - non-condensin: 0 to 100% RH (15 to 95% continuous) * Power Consumption: 10 to 50 uW (circuit & ambient O3 dependent)
DGS-CO 968-034 Digital CO Sensor Module DESCRIPTION Easily add Carbon Monoxide sensing to your IoT application with our digital CO sensor module that provides a calibrated and temperature compensated output. 0 to 1000 ppm Carbon Monoxide sensor with digital output DGS-CO 968-034 Digital CO Sensor Module BENEFITS * Low Power - 1 mW @ 1 minute sampling * Fast Response - 15 seconds typical * Calibrated & Temp. Compensated Output * Simple Digital UART Interface * Integrated T & RH Sensors * Robust 10-year Estimated Lifetime * ROHS Compliant * Small form Factor * UART to USB adapter provided * Lightweight (< 2 oz.) DGS-CO 968-034 Digital CO Sensor Module APPLICATIONS * Life Safety Levels * Air Quality Levels DGS-CO 968-034 Digital CO Sensor Module MEASUREMENT PERFORMANCE CHARACTERISTICS Based on Standard Conditions 25'C, 50% RH and 1 atm * Measurement Range: 0 to 1000 ppm * Resolution: 0.1 ppm * Zero Accuracy:± 1 ppm * Measurement Accuracy: 15% of reading * Measurement Repeatability:
FECS41-250 for the Detection of Nitric Oxide Figaro's Nitric Oxide Sensor FECS41-250 is a unique electrochemical-type nitric oxide sensor. Its most notable feature is its unique leak-proof structure, making it ideal for NO monitors and detectors in various fields. FECS41-250 Nitric Oxide (NO) Sensor Features: * High sensitivity/selectivity to NO * Quick response to NO * Linear output * Long life * Stable baseline * Unique leak-proof structure FECS41-250 Nitric Oxide (NO) Sensor Applications: * Portable and fixed installation NO monitors * NO detectors * Ventilation control for indoor parking garages FECS41-250 Nitric Oxide (NO) Sensor Specifications * Detection Gas: Nitric Oxide * Detection Range: 0 ~ 300 ppm * Maximum Overload: 1000 ppm * Output Signal: 400 ± 80 nA/ppm * Repeatability: ±2% * Resolution: 0.5 ppm
VPA.8000.1003 Dew Point Sensor Product Description VPInstruments' dew point transmitters are designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible. The calibrated transmitters can be instantly incorporated into VPVision or they can be connected to your air or gas management and control system. Maintaining the dew point of your air or gas system will prolong the life of your equipment. Permanent monitoring enables you to detect and prevent problems in time. VPA.8000.1003 Dew Point Sensor Features and benefits 2-wire loop powered connection Dew point or ppm moisture content IP66 (NEMA 4X) Excellent sensor protection Fast response time VPA.8000.1003 Dew Point Sensor Application Extreme dry air
VPA.8000.1013 Dew Point Sensor Product Description VPInstruments' dew point sensors are designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible. The calibrated transmitters can be instantly incorporated into VPVision or they can be connected to your air or gas management and control system. Maintaining the dew point of your air or gas system will prolong the life of your equipment. Permanent monitoring enables you to detect and prevent problems in time. We offer various models which meet both moderate dry air (refrigerant dryer) and extreme dry air (dessicant dryer) applications. VPA.8000.1013 Dew Point Sensor Features and benefits For moderate dry air 3-wire loop powered connection Dew point or ppm moisture content IP66 (NEMA 4X) Excellent sensor protection Fast response time VPA.8000.1013 Dew Point Sensor Application Moderate dry air (refrigerant dryer) PA.8000.1013 Dew Point Sensor Specifications Dew point range: -40 ~ +60'C (-40 ~ 140'F) dew point Temperature: -30 ~ +70'C (-22 ~ 158°F) Humidity: 0 ~ 95% RH (non-condensing) Pressure: 20 barg maximum Output: 4 - 20 mA 3-wire Power supply: 8 - 30 VDC
3SP_NO2_5F C NO2 Sensor DESCRIPTION SPEC's printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. SPEC's printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size. 3SP_NO2_5F C NO2 Sensor BENEFITS * NEW Onboard Filter Removes Ozone!!! * NEW More Stable with T & RH!!! * Small Size with Low Profile (20x20x3 mm) * Long Life (10 years expected life) * Fast Response (< 15 seconds) * Low Power Consumption * ROHS Compliant 3SP_NO2_5F C NO2 Sensor APPLICATIONS * Air Quality Monitoring * Industrial Safety * Air Purification Control 3SP_NO2_5F C NO2 Sensor SPECIFICATIONS * Measurement Range: 0 to 5 ppm * Resolution: < 20 ppb (instrumentation dependent) * Repeatability: < +/- 3 % of reading * Response Time T90: < 300 ( 200 seconds typical) * Sensitivity -25 mV bias: -30 +/- 15 nA/ppm * Expected Operating Life: > 5 years (10 years 23+/-3'C; 40+/-10% RH) * Operating Temperature Range: -40 to 50'C (-20 to 40'C recommended) * Operating Humidity Range - non-condensing: 0 to >95% RH (15 to 95% continuous) * Power Consumption: 10 to 50 uW (circuit & ambient NO2 dependent)
HTM226LF Temperature and Humidity Sensor Module DESCRIPTION Based on the rugged HS24LF resisitive humidity sensor, HTM226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the nodule's linear voltage output. HTM226LF Temperature and Humidity Sensor Module FEATURES * Full Lead free product * Calibrated within +/-5% @55%RH at 5Vdc * Small size and very cost effective * Miniature connector (JST) * 50kOhms +/-3% NTC temperature sensor @25'C * The best combination of cost effectiveness and performance * Stable, linear proportional voltage output from 0% to 95%RH * Stable and reproducible characteristics with temperature * High reliability and long term stability HTM226LF Temperature and Humidity Sensor Module APPLICATIONS * Air condition, Humidifier, Dehumidifier * Humidity controller, Humidity transmitter * Hygrometer, Hygro-recorder * Copying machine * Clock, Weather-forecast barometer
HM1520/HM1520LF Relative Humidity Sensor Description Based on the rugged HS1101LF capacitive humidity sensor, HM1520LF is a dedicated humidity transducer designed for measurements at low humidity. Direct measurement of dew point or water concentration can be easily obtained in really cost effective conditions. Direct interface with a micro-controller is made possible with the module's linear voltage output. HM1520/HM1520LF Relative Humidity Sensor Main features * Tubular form for through wall mounting * Not affected by water condensation * Full interchangeability * Typical 1 to 1.6 Volt DC output for 0 to 20% RH at 5 V DC supply * Calibrated, linear voltage for easy electronic interface * Controlled temperature dependency * Ratiometric to voltage supply Humidity sensor specific features * No affected by long period at low humidity values. * Patented solid polymer structure. * High resistance to chemicals. * Fast response time. HM1520/HM1520LF Relative Humidity Sensor Applications * telecommunication environment * Automotive cabin air control * Home appliances * Agriculture and environment protection * Industrial process control systems
Htm2500/htm2500lf relative temperature and humidity sensor * hermetic housing * humidity calibrated within +/-2% @55%rh * temperature measurement through ntc 10koohms +/-3% direct output * small size product * typical 1 to 4 volt dc output for 0 to 100%rh at 5vdc Htm2500lf relative temperature and humidity sensor description Based on the rugged hts2010 humidity / temperature sensor, htm2500 is a dedicated humidity and temperature transducer designed for oem applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage output. Htm2500lf relative temperature and humidity sensor features * full interchangeability * high reliability and long term stability * not affected by water immersion * ratiometric to vlotage supply * suitable for 3 to 10 vdc supply voltage Humidity sensor specific features * instantaneous de-saturation after long periods in saturation phase * fast response time * high resistance to chemicals * patented solid polymer structures Temperature sensor specific features * stable * high sensitivity Htm2500lf relative temperature and humidity sensor applications * industrial * process control * hygrostat * data logger
Optomax Industrial Glass Series Liquid Level Switches Description The Optomax Industrial Glass range liquid level switches can operate in aggressive environments due to their stainless steel and glass construction while offering industrial supply voltages and outputs that can directly drive loads. The microcontroller based Optomax Industrial Glass Range liquid level switches are solid state, incorporating an infra-red LED and phototransistor which are optically coupled by the tip when the sensor is in air. When the sensing tip is immersed in liquid, the infra-red light escapes making the output change state. The sensor can detect the presence or absence of almost any liquid type; oil or water based. It is insensitive to ambient light and is not affected by foam when in air or by small bubbles when in liquid. A range of N and P type output configurations can sink or source up to 1A at supply voltage ranges from 4.5 to 15.4Vdc or 8 to 30Vdc and can be configured to output a high or low signal in either a wet or dry state. Options for connecting to inductive loads or digital interfaces are also available. With housing threads suitable for external sensor mounting and for use in two operating temperature ranges; Standard (-25 to 80'C) or Extended (-40 to 125'C). LLG210D3-00x Liquid Level Switches FEATURES * Liquid level switches that can detect almost any liquid type; oil or water based * Suitable for harsh environments; robust stainless steel housing and glass tip * Choice of mounting threads LLG210D3-00x Liquid Level Switches BENEFITS * High power * Industrial supply voltage * Direct load drive
MB1004 LV-ProxSonar-EZ0 High Performance Ultrasonic Rangefinder MB1004 LV-ProxSonar-EZ0 Ultrasonic Rangefinder Product Description These ultrasonic proximity sensors detect objects in a calibrated detection zone. The LV-ProxSonar-EZ sensors report when an object (such as a person) enters the detection zone. The target is released after leaving the LVâ??ProxSonarâ??EZ detection zone. The LV-ProxSonar-EZ0 has a detection zone of ~7 feet and will allow for 6+ simultaneous sensors. MB1004 LV-ProxSonar-EZ0 Ultrasonic Rangefinder Product Specifications * Resolution of 1 inch * ~2.5 second target acquire time * ~1.5 second target release time * Automatic multi-sensor operation * People sensor * Maximum reported range of 254 inches (645 cm) * ~7 foot proximity detection zone (84 inches or 213 cm) * Run up to 6+ sensors in the same environment * Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial * 42kHz Ultrasonic sensor measures distance to objects * RoHS Compliant * Read from sensor outputs: Serial and Pulse Width * Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches * Operates from 2.5-5.5V * Low 2.0mA average current requirement * Small, light weight module * Designed for easy integration into your project or product * Longest detection zone
ToughSonic 14 Level & Distance Sensor PC or Button Setup, Waterproof, Two Selectable Outputs TSPC sensors and SenixVIEW software put the power of ultrasonics in your hands yet retain the simplicity of push-button TEACH setup. You can quickly adjust, optimize, save and clone your applications without calibration! ToughSonic sensors contain a rugged transducer potted in a stainless steel housing for long life. Outputs respond to measured distance and non-contact technology means nothing touches your materials. Many applications exist in all industries. Non-Contact Ultrasonic Distance & Level Measurement TSPC-30S1 Series Ultrasonic Level & Distance Sensor Features Distance Measurements * Long range, short dead band * Unaffected by optical factors like color and transparency * PC or button "teachable" setup * Narrow beam with adjustments to optimize performance * Temperature compensated Packaging & Performance * Quick mounting * Durable sealed housing for wet or dirty applications * Short & overload protected I/O * Multi-sensor synchronization * Adjustable sensitivity * Rear status indicators (3) Free Functionality using adjustable interface features like switch hysteresis and time delays to build complete solutions such as pump or material flow controllers. Save cost by eliminating PLCs, delay circuits and time delay relays!
OXY-LC Oxygen Sensor Interface Board Description The OXY-LC Oxygen Sensor Interface Electronics provides the necessary electronics to power and control SST range of zirconium dioxide (ZrO2) sensors. The OXY-LC Oxygen Sensor offers various user configurable output variants RS485, PWM, 0-10Vdc and 4-20mA. The RS485 Modbus RTU Protocol offers various benefits over other output types but most importantly it allows complete control of the sensor operation and access to all available information including sensor diagnostics, barometric pressure and pressure sensor temperature. The adaptive software filtering which enables it to provide a fast response coupled with a stable oxygen output. In addition to this, the OXY-LC Oxygen sensor interface electronics offers a high accuracy linear output for all of our zirconium dioxide oxygen sensors. The built in pressure sensor allows for barometric pressure compensation and the interface mounted screw terminals offers easy wiring with reverse voltage and transient overvoltage. OXY-LC Oxygen Sensor Interface Board FEATURES * Provides the electronics necessary to power and control SST range of zirconium dioxide (ZrO2 ) sensors * Built in pressure sensor for barometric pressure compensation * Interface mounted screw terminals for easy wiring with reverse voltage and transient overvoltage OXY-LC Oxygen Sensor Interface Board BENEFITS * Adaptive software filtering provides a fast sensor response coupled with a stable oxygen output * High accuracy linear outpu t
Oxy-comm zirconia oxygen analyser description The oxy-comm zirconia oxygen analyser is designed for controlled atmosphere applications such as refrigerated transportation containers and fire prevention. The oxy-comm zirconia oxygen analyser combines a high accuracy zirconium dioxide oxygen sensor with a networkable, fault tolerant rs485 interface. The oxygen analyser is mounted under a stainless steel hood to protect it from the environment. The ip65 waterproof die-cast aluminium housing accommodates the electronics and has a 4-pole m12 connector to allow multiple devices to be interconnected. The oxygen sensor inside oxy-comm uses a unique closed loop measurement system. While oxy-comm continuously measures the oxygen level, a heartbeat signal is also generated providing an immediate warning of any failures. Due to the innovative design, the oxy-comm zirconia oxygen analyser does not require a reference gas. Low drift means these products do not require frequent calibration but when they do, it is an extremely simple process which can be performed in fresh air which means there is no need for expensive calibration gases. The oxy-comm zirconia oxygen analyser has an 8 to 15vdc supply voltage range with reverse polarity and transient overvoltage protection. The oxygen analyser is barometric pressure compensated and can be calibrated in fresh air (20.7% o2) or to any other known o2 concentration. Oxy-comm-rs485 zirconia oxygen analyser features * 8-15v dc supply voltage with reverse polarity and transient overvoltage protection * networkable, fault tolerant rs485 interface, short circuit and overvoltage protection * can be calibrated in fresh air (20.7% o2 ) or to any other known o2 concentration * barometric pressure compensation Oxy-comm-rs485 zirconia oxygen analyser applications * refrigerated transportation containers * protecting historical artefacts against oxidation * fire prevention in facilities such as server rooms, or document storage
