HTG3535CH Humidity and Temperature Sensor Module with voltage output DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3535CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. FEATURES * Voltage Supply: 5 Vdc * Nominal Output @55%RH: 2.401 - 2.559 V * Humidity Average Sensitivity: +26 mV/%RH * Current consumption: 1.2 mA dc * Humidity Measuring Range: 0 - 100 %RH * Humidity Operating Range: 0 - 100%RH * Temperature Operating Range: -40 - 110'C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25'C * Humidity calibrated within +/- 3% RH @ 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations APPLICATIONS * Automotive * Home Appliance * Printers -
Frequency Output Temperature and Humidity Sensor HTF3226LF DESCRIPTION Based on the rugged HS1101LF humidity sensor, HTF3226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a miniature connector for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the moduleâ??s linear frequency output. FEATURES * Full Lead free product * Calibrated within +/-5% @55%RH * Small size and very cost effective * Miniature connector (JST) * 10kOhms +/-3% NTC temperature sensor (1% optional) * The best combination of cost effectiveness and performance * Stable, linear proportional frequency output from 10% to 95%RH * Stable and reproducible characteristics with temperature * High reliability and long term stability Humidity Sensor Specific Features * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Not affected by water immersion * Patented solid polymer structure Temperature Sensor Specific Features * High quality thermistor * Stable * High sensitivity APPLICATIONS * Printers * Home Appliance -
Voltage Output Temperature and Humidity Sensor HTG3515CH DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. FEATURES * Voltage Supply: 5 Vdc * Nominal Output @55%RH: 2.401 - 2.559 V * Humidity Average Sensitivity: +26 mV/%RH * Current consumption: 1.2 mA dc * Humidity Measuring Range: 0 - 100 %RH * Humidity Operating Range: 0 - 100%RH * Temperature Operating Range: -40 - 110'C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25'C * Humidity calibrated within +/- 3% RH @ 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations APPLICATIONS * Automotive * Home Appliance * Printers -
Temperature and Relative Humidity Sensor Module Description: Based on the rugged HS1101LF humidity sensor, HTF3000LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the module's linear frequency output. Features: * Small size product * Compliant with RoHS recommendations and most of Lead Free Soldering Process * Humidity calibrated within ±3% @55%RH at 5Vdc * Stable, proportional frequency output from 0 to 100% RH * High quality thermistor * One of the smallest humidity/temperature modules on the market * High reliability and long term stability * Not affected by water immersion * Stable characteristics with temperature * Part could be washed with distilled water Humidity Sensor Specific Features: * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Patented solid polymer structure Temperature Sensor Specific Features: * 10kΩ ±1% NTC temperature sensor * Stable * High sensitivity APPLICATIONS: * Printers * HVAC controller -
MB7589 SCXL-MaxSonar-WRMT Self Cleaning Precision Ultrasonic Rangefinder Product Description The weather resistant SCXL-MaxSonar-WR selfâ??cleaning sensor is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4-inch PVC pipe fittings. MB7589 Features and Benefits * Factory calibrated beam width * Low operating voltages from 2.7V to 5.5V * All range outputs are active simultaneously * Superior clutter rejection MB7589 Applications and Uses * Bin Level Measurement * Tank Level Measurement z
MB1444 USB-ProxSonar-EZ4 High performance USB ultrasonic proximity detection sensor Product Description The USB-ProxSonar-EZ4 has a detection zone of ~1 feet and will allow for 15+ simultaneous sensors. These ultrasonic proximity sensors detect objects in a calibrated detection zone. The USB-ProxSonar-EZ sensors report when an object (such as a person) enters the detection zone. The target is released after leaving the USB-ProxSonar-EZ detection zone. Product Specifications * USB interface * ~2.5 second target acquire time * ~1.5 second target release time * Automatic multi-sensor operation * People sensor * Resolution of 1 inch * Maximum Range of 125 inches (318 cm) * Detection zone range of 12 inches (30 cm) * 42kHz Ultrasonic sensor measures distance to objects * RoHS compliant * Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches * Small, light weight module * Designed for easy integration into your project or product * Short range detection * Quote Request Form: For orders greater than 100 sensors -
MB1040 LV-MaxSonar-EZ4 High Performance Ultrasonic Rangefinder Product Description The LV-MaxSonar-EZ4 is the narrowest beam width sensor that is also the least sensitive to side objects offered in the LV-MaxSonar-EZ sensor line. The LV-MaxSonar-EZ4 is an excellent choice when only larger objects need to be detected. MB1040 Features and Benefits * Best side object rejection in the LV-MaxSonar-EZ sensor line * Low power consumption * Easy to use interface * Best for large object detection * Can be powered by many different types of power sources * Can detect people up to approximately 4 feet MB1040 Applications and Uses * Landing flying objects * Used with battery power * Autonomous navigation * Educational and hobby robotics * Collision avoidance -
Model TS318-1B0814 Thermopile Sensor * Thermopile IR-Sensor * For Contact less Temperature Measurement * Single Element * Small Package for Ear Thermometer * High Signal * Flat Filter * Accurate Reference Sensor DESCRIPTION Thermopiles are mainly used for contact less temperature measurement in many applications. Their function is to transfer the heat radiation emitted from the objects into a voltage output. FEATURES * High Signal * Ni-RTD Reference Sensor * Small TO-18 Package * 8-14µm Band Pass Filter for measurement distances >0.5m APPLICATIONS * Pyrometers (general) * Industrial Pyrometers -
TSEV01CL55 Thermopile Sensor Module Description TSEV01CL55 is a contact-less temperature measuring system for OEM use based on the detection of infrared radiation. TSEV01CL55 is equipped with an infrared sensor (Thermopile) in front. The Thermopile Sensor has to be pointed at the target object of interest. The basic working principle is: Detection of infrared radiation with a Thermopile sensor, which turns incoming radiation to an analogue voltage Determination of sensor temperature using a thermistor Further analogue signal processing and conditioning Calculation of ambient and object temperature using a processing unit Providing the ambient and objects temperature at digital output bus (I2C) The TSEV01CL55 is suitable for a wide range of application where non-contact The TSEV01CL55 is equipped with a silicon lens (back focal length = 5.5mm) to narrow the field of view. I2C pull-up resistors are provided on the sensor. The I2C interface does not block the clock for clock-stretching. FEATURES * 0'C - 300'C Measurement Range * 4V - 16V Supply Voltage Range * Up to 1.5% Accuracy * 2mA Current Consumption APPLICATIONS * Contact less Temperature Measurement * Climate Control * Industrial Process Control * Household Applications -
UV-A Sensor GUVA-C32SM GENERAL DESCRIPTION GUVA-C32SM supports integrated functions of ultraviolet light sensors such that can be easily configured and used in user applications. GUVA-C32SM comprises photodiodes, amplifiers, ADC, digital control logic and I2C interface circuit.GUVA-C32SM receives UVA and outputs digital count according to the intensity. Power consumption can be minimized by proper use of power management mode. FEATURES - UVA sensing with 16-bit resolution - Support UV index measurement (0 - 16) - Programmable gain and integration time - I2C slave interface up to 400KHz - Power management modes - Shutdown current : 0.8uA typical - Supply voltage of 2.2V to 3.6V - 2.0mm x 2.3mm x 1.4mm ,4-pin COBpackage APPLICATIONS Smartphone, Wearable devices, IoT, watch, weather station, bicycle navigation, gaming, accessary -
1. Ftatures - Chip size: 0.4mm, SMD 3528 PKG - Aluminium Gallium Nitride Based Material - Schottky-type Photodiode - Photovoltaic Mode Operation - Good Visible Blindness - High Responsivity and Low Dark Current 2. Application UV Index Monitoring 3. Absolute Maximum Ratings Storage Temperature: -40~90'C Operating Temperature: -30~85'C Reverse Voltage: 3V Forward Current: 1mA Optical Source Power Range: 0.1u~100m W/cm2 Soldering Temperature: 260'C 5. Characteristics (at 25'C) Dark Current: 1nA Temperature Coefficient: 0.1%/'C Responsivity: 0.11A/W Spectral Detection Range: 240~320nm Active area: 0.076mm2 -
MB7052 XL-MaxSonar-WRM1 High Performance Ultrasonic Precision Rangefinder Product Description The XL-MaxSonar-WRM1 ignores smaller targets and only reports the range to target with the largest acoustic return. This is one of our advanced weather resistant sensors designed for target detection and ranging outdoors or in tank or bin applications. The weather resistant XL-MaxSonar-WRM1 is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4â??inch PVC pipe fittings. MB7052 Features and Benefits * Clutter rejection provides range to the largest amplitude reflection within the field of view * Real-time calibration, noise rejection and additional filtering provides stable range information * Excellent for ranging to large objects in the presence of cluttered or noisy environments * Excellent for applications that require consistently accurate outputs * Impressive acoustic and electrical noise resistance * 6.6Hz refresh rate on the MB7052 MB7052 Applications and Uses * Autonomous Navigation * Environments with acoustic and electrical noise *Bin Level Measurement * Tank Level Measurement z
FEATURES * Oxygen pressure range 2 mbar - 3bar * Zirconium dioxide (ZrO2 ) sensing elements * Non-consumption technology * Integral heating element * No need for temperature stabilisation * No reference gas required * High accuracy * Linear output signal * Operates with external interface boards SPECIFICATIONS Heater Voltage Porous Cap (15mm) 4.35V DC ± 0.1V DC (1.85A) Stand by 2V DC (0.85A) Pump resistance @ 700'C < 6k� Permissible gas temperature -100 to 250'C Gas flow rate 0 to 10 m/s Repetitive permissible acceleration 5 g Incidental permissible acceleration 30 g z
1.Features Gallium Nitride Based Material Schottky-type Photodiode Photovoltaic Mode Operation Good Visible Blindness High Responsivity & Low Dark Current 2.Applications UV Index Monitoring UV-A Lamp Monitoring 3. Absolute Maximum Ratings Storage Temperature: -40~90'C Operating Temperature: -30~85'C Reverse Voltage: 5V Forward Current: 1mA Optical Source Power Range: 0.1u~100m W/cm2 Soldering Temperature: 260'C 4. Characteristics (at 25'C) Dark Current: 1nA Temperature Coefficient: 0.08%/'C Responsivity: 0.14A/W Spectral Detection Range: 240~370ã?? Active area: 0.076mm2
1. Features Aluminium Gallium Nitride Based Material Schottky-type Photodiode Photovoltaic Mode Operation Good Visible Blindness High Responsivity & Low Dark Current 2. Applications UV Index Monitoring 3. Absolute Maximum Ratings Storage Temperature: -40~90'C Operating Temperature: -30~85'C Reverse Voltage: 3V Forward Current: 1mA Optical Source Power Range: 0.1µ~100m W/cm2 Soldering Temperature: 260'C 4. Characteristics (at 25'C) Dark Current: 1nA Temperature Coefficient: 0.1%/'C Responsivity: 0.11A/W Spectral Detection Range: 240~320nm Active area: 0.076mm2
O2I-Flex Oxygen Sensor Interface Board FEATURES * Provides the electronics necessary to power and control SST's range of zirconium dioxide (ZrO2 ) sensors * Externally triggered automatic or manual calibration. Calibration can also be initiated via an on-board push button * Power and sensor operating LEDs * Removable polarised screw terminals for easy wiring BENEFITS * Adaptive software filtering provides a fast sensor response coupled with a stable oxygen output * High accuracy linear output * Can be calibrated in fresh air (20.7% O2 ) or in any other known O2 concentration TECHNICAL SPECIFICATIONS Supply voltage 24V DC ± 10% Supply current 600mA max. at 24V DC Digital output RS232 Analogue output 4 ~ 20mA; load 100 ~ 600Ω or 0 ~ 10V DC ; load 10kΩ min Temperature limits Storage: -10'C to +70'C Operating: -10'C to +70'C Oxygen pressure limits 1 ~ 1000mbar OUTPUT VALUES Oxygen range (analogue output) 0.1 ~ 25% O2 or 0.1 ~ 100% O2 Oxygen range (RS232 output) 0.1 ~ 100% O2 Accuracy after calibration 1% O2 Repeatability after calibration 0.5% O2 Output resolution: 0-10V DC : 0.01V 4-20mA: 0.01mA RS232: 0.01% O2 Response time (step 10-90%) Fast response sensor connected: < 4s Standard response sensor connected: < 15s Initial warm up time (till stable output) 5 ~ 10mins Output inactive start up delay (heater warm up) 60s
FOT-L Temperature Sensors Fiber Optic Temperature Sensors The FOT-L-SD and FOT-L-BA are fiber optic temperature sensors perfectly suited for harsh environmental conditions such as in cryogenics, nuclear, microwave, and strong RF applications. The FOT-L temperature sensors combine all the desired characteristics you would expect from the ideal sensor. These temperature sensors offer accuracy and reliability in extreme temperature and hostile environments. Features: Intrinsically safe Up to 300'C (572'F) High accuracy Miniature and rugged sensor Applications: Microwaves and RF; Medical applications; Nuclear environments; In-situ process monitoring; Harsh and hazardous environments; High temperature environments Aerospace applications Specifications: 1) Temperature range: FOT-L-SD -40'C to 300'C ( -40'F to 572'F) FOT-L-BA - 40'C to 250'C ( -40'F to 482'F) 2) Resolution (*1) : 0.1'C 3) Accuracy (*2) : ±1'C 4) Response time: FOT-L �1.5 second FOT-L-BA �0.5 second 5) Connector type: ST connector *1. Signal conditioner dependent. *2. ±0.5'C is attainable when using a reduced temperature range of 20'C to 85'C (68'F to 185'F).
MinIR is an ultra low power (3.5mW4 ), high performance CO2 sensor, ideally suited for battery operation and portable instruments. Based on patented IR LED and Detector technology and innovative optical designs, MinIR is a third generation product from Gas Sensing Solutions Ltd - leaders in IR LED CO2 sensing. Ultra-low Power 3.5mW Measurement ranges from 0 to 100% 3.3V supply. Peak current only 33mA. Compact 20mm diameter package
Ultra Low Power NDIR CO2 Sensor Carbon Dioxide Sensor 0-100% VOL Summary COZIR is an ultra low power (3.5mW4), high performance CO2 sensor,ideally suited for battery operation, portable instruments and HVAC. Based on GSS IR LED and Detector technology, and innovative optical designs, the COZIR offers the lowest power NDIR sensor available.Optional temperature, humidity and light sensing are available. COZIR is a third generation product from GSS - leaders in IR LED CO2 sensing. Specification 1) Ultra-low Power 3.5mW 2) Measurement ranges from 5% to 100% 3) 3.3V supply. 4) Peak current only 33mA. 5) Optional Temperature and Humidity Output 6) Can be made by analog output ( this option can not together with temperature & humidity output)
SE564 ORP Sensor Heavy duty ORP sensor providing high reliability and precision Heavy duty ORP electrode designed for highly contaminated media and high-pres- sure applications with pressure fluctuations. The state-of-the-art polymer electrolyte of the reference system provides good long- term stability. The 2-hole junction prevents blocking also in waste water containing solid impurities. The platinum electrode is insensitive to oxidizing acids even at elevated temperatures. Facts perfect galvanic isolation thanks to Memosens technology no influence of humidity in the connector digital data transfer integrated sensor diagnostics state-of-the-art polymer electrolyte integrated temperature detector 2-hole junction - no blocking for industrial sewages for processes with large pressure fluctuations suitable for solvent-containing processes Applications Process industry, chemistry, industrial sewage, high-pressure applications Specifications ORP: -1500 mV ~ +1500 mV Temperature: 0 ~ 130 'C Pressure: up to 10 bars Temperature detector NTC 30 kohms Sensor material: platinum Reference system: Ag/AgCl, polymer electrolyte Junction: hole (2x) Length: 120 mm / 225 mm Sensor cap: Memosens ATEX certificate: II 1 G Ex ia IIC T3 / T4 / T6
