Ts318-1B0814 Infrared Temperature Sensor

For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. • 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb • Wattage: 10W • Blue UV light • Lumen: 900-1000lm • Color Temperature (CCT): 6500K • Input Voltage: AC 90-130V & 220v-240V • With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.

Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass

INFRARED SENSOR WITH SILICON LENS SMTIR9902SIL Typical Applications * Contactless measurement of surface temperatures * Temperature measurement of moving objects * Remote measurement due to small angle of view * Climate control * Medical instruments Introduction The Smartec infrared sensor type SMTIR9902SIL is a standard Smartec SMTIR9902 sensor equipped with a silicon lens for measuring radiation temperatures within a small angle of view (7.27'). The SMTIR9902SIL contains a NI1000 temperature sensor for measuring the temperature of the sensor itself. The temperature range of this internal sensor is -20 to 100 'C. The sensor is mounted in a modified TO-05 encapsulation.

TSEV01CL55 Thermopile Sensor Module Description TSEV01CL55 is a contact-less temperature measuring system for OEM use based on the detection of infrared radiation. TSEV01CL55 is equipped with an infrared sensor (Thermopile) in front. The Thermopile Sensor has to be pointed at the target object of interest. The basic working principle is: Detection of infrared radiation with a Thermopile sensor, which turns incoming radiation to an analogue voltage Determination of sensor temperature using a thermistor Further analogue signal processing and conditioning Calculation of ambient and object temperature using a processing unit Providing the ambient and objects temperature at digital output bus (I2C) The TSEV01CL55 is suitable for a wide range of application where non-contact The TSEV01CL55 is equipped with a silicon lens (back focal length = 5.5mm) to narrow the field of view. I2C pull-up resistors are provided on the sensor. The I2C interface does not block the clock for clock-stretching. FEATURES * 0'C - 300'C Measurement Range * 4V - 16V Supply Voltage Range * Up to 1.5% Accuracy * 2mA Current Consumption APPLICATIONS * Contact less Temperature Measurement * Climate Control * Industrial Process Control * Household Applications -

Place of Origin: original Brand Name: original Model Number: OTP-638D2 Usage: Other Theory: Other Output: Other Description: OTP-638D2 Color: Original Color Shipping Term: DHL/TNT/FEDEX Payment: Union.Paypal TT Delivery time: 3 working days Quality: original

INFRARED SENSORS SMTIR9901/02 Typical applications * contactless measurement of surface temperatures or infrared radiation * temperature measurement on moving objects * continuous temperature control of manufacturing * thermal alarm systems * climate control * medical instruments * home appliances Features High accuracy High sensitivity (110 V/W) Low resistance (50 Kohm) and therefore Very good signal-to-noise-ratio Good response time (40 ms) Low cost thin film technology Introduction The Smartec infrared sensors SMTIR9901 and SMTIR9902 are sophisticated full silicon infrared sensors which can be used in measuring the radiation temperature without any contact. For the different radiation temperature ranges various filters are available. The sensor type SMTIR9902 contains a temperature sensor for measuring the temperature of the sensor itself. The temperature range of the sensor-element is between - 40 to 100 'C. The sensor is available in a standard TO-05 encapsulation and with a 5.5. µm. high pass filter. Easy and accurate measuring of the sensors temperature by means of a built-in temperature sensor (only for type SMTIR9902).

PSC-CX Digital, two wire, loop powered infrared temperature sensor for OEM applications PSC-CX Infrared Temperature Sensor Description The PSC-CS self-Contained, 2-wire loop powered IR temperature sensor with 4-20 mA output features: * High-performance, great value * Simple 2-wire installation * Wide range of -30'C to 900'C (adjustable with PSC Connect Software) * Optical resolution of 22:1 * Optional USB programming interface * Alarm output (0-30 V / 500 mA) * Real-time 2-wire output and digital communication * Versatile power requirements: 5-30 VDC PSC-CX Infrared Temperature Sensor Specifications * Temperature range (scalable via software): -30 - 900'Câ?? * Spectral range: 8 -14µmâ?? * Optical resolution: 22:1â?? * CF-Optics (optional): 0.6mm @10 mmâ?? * Outputs/analog: 4 - 20 mAâ?? * Environmental rating: IP 65 (NEMA-4)â?? * Ambient temperature: -20 - 75'Câ?? * Relative humidity: 10-95%, non condensing

PSC-SSS (Smart Small Sensor) Precise non-contact temperature measurement from -50'C to 975'C PSC-SSS-LT Infrared Temperature Sensor Description The PSC-SSS IR temperature sensor series is a highly versatile low cost solution for reliable temperature measurement. It features a temperature range of -50 to 1800'C which is fully scalable by an operator via programming keys, or by use of the included, no cost PSC Connect software. Other IR sensor parameter adjustments include peak picking, valley hold, average, and extended hold function with threshold and hysteresis. The sensor head can be installed in higher ambient temperature, and a full line of rugged industrial accessories is available for its protection and optimum operation. Its small size facilitates temperature measurement in not easily accessible areas and simplifies integration into existing manufacturing systems. All PSC-SSS Sensors feature a choice of outputs including 4 to 20 mA, thermocouple, and linear voltage. Optional digital outputs include USB, RS-232, RS-485, CAN, Profibus DP and Ethernet. Programmable functional inputs for external emissivity adjustment, ambient temperature compensation and trigger reset of hold functions are provided. PSC-SSS-LT Infrared Temperature Sensor Features * One of the smallest infrared sensors worldwide with 22:1 optical resolution * Rugged and usable up to 180'C ambient temperature without cooling * Separate electronics with easy accessible programming keys and LCD backlit display * Selectable analog output: 0/4-20 mA, 0-5 V, 0-10 V, thermocouple type K or J * Optional USB, RS485, RS232 interface, relay outputs (2 x optically isolated), CAN-Bus, Profibus DP, Ethernet * Installation of up to 32 sensing heads PSC-SSS-LT Infrared Temperature Sensor Specifications * Temperature Range: -50 to 975'C * Spectral Response: 8 - 14µm * Optics Type: Laser Accessory * Min. Spot Size: 1.2 mm * Response Time: 150 ms * Power Supply: 8-36 V DC * Environmental rating: IP 65 (NEMA-4) * Relative humidity: 10 - 95%, non condensing