Digital relative humidity and temperature sensor htu20d description Htu20d(f), is a new digital humidity sensor with temperature output of meas. Setting new standards in terms of size and intelligence, it is embedded in a reflow solderable dual flat no leads (dfn) package with a small 3 x 3 x 0.9 mm foot print. This sensor provides calibrated, linearized signals in digital, i2c format. Htu20d(f) digital humidity sensors are dedicated humidity and temperature plug and play transducers for oem applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensor are designed for high volume and cost sensitive applications with tight space constraints. Digital relative humidity and temperature sensor htu20d features * full interchangeability with no calibration required in standard conditions * instantaneous desaturation after long periods in saturation phase * compatible with automatized assembly processes, including pb free and reflow processes * individual marking for compliance to stringent traceability requirements Digital relative humidity and temperature sensor htu20d applications * home appliance * medical * printers * humidifier * multimedia: smartphone, tablet,
Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor MisIR Summary NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. Based on GSS patented solid state IR sensor technology and innovative optical designs, MISIR is configured to meet the requirements of the HVAC and Demand Led Ventilation markets. Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor MisIR Characteristic * Low Power 20mW * Measurement ranges from 0 to 1% * Low noise measurement
Low power carbon dioxide sensor nrid co2 gas sensor cozir-a description Cozir is an ultra low power (3.5mw), high performance co2 sensor, ideally suited for battery operation and portable instruments. Based on patented ir led and detector technology and innovative optical designs, cozir is the lowest power ndir sensor available. Optional temperature and humidity sensing are available. Cozir is a third generation product from gas sensing solutions ltd ? leaders in ir led co2 sensing. With measurement ranges of 0-2000ppm, 0-5000ppm and 0-1% the cozir ambient sensor is suitable for applications such as building control and horticulture. * ultra-low power 3.5mw * measurement ranges from 0 to 1% * low noise measurement
Ac/ dc operated carbon monoxide (co) alarm Vst-c598ih Carbon monoxide (co) alarm vst-c598ih features and benefits * ac/dc operated carbon monoxide alarm * non-radioactive technology for environmental friendly * co concentration threshold: Varying time-to-alarm depending on concentration * with quick fix mounting bracket for easy installation and simple ac connector for easy installation * fitting and battery tamper resist feature * inter-connectable up to 40 co, heat and/or smoke alarms * 3 color led indicator (fault and alarm and ac power indicator) * low-battery and battery missing warning indicator * hush/test button * auto-reset when co clears * ce approved, comply with en50291-1:2010
Fiber Optic Pressure Sensor FOP-M description The FOP-M is a fiber optic pressure sensor designed mainly for applications where high temperature conditions can be found such as in aerospace and defense.It is also a useful tool for general industrial applications in harsh and hazardous environments Fiber Optic Pressure Sensor FOP-M Specification: Pressure range: 0-5, 0-50, 0-150 and 0-1,000psi Resolution:
Luminox ppm fluorescence o2 sensors features * fluorescenceâ??based optical technology * contains no hazardous materials; rohs & reach compliant * factory calibrated * high accuracy * maintenance free * long life, non-depleting technology - can be stored in any oxygen % Luminox ppm fluorescence o2 sensors benefits * low power, long life due to non-depleting sensing principle * compact footprint Luminox ppm fluorescence o2 sensors technical specifications Supply voltage (vs) : 8-30v dc Supply current (ls) :
Sic uv photodiode sg01m-5lens Concentrator lens sic based uv photodiode avirtual = 11.0 mm2 Properties of the sg01m-5lens sic uv photodiode * broadband uva+uvb+uvc, ptb reported high chip stability, for very weak radiation * radiation sensitive area a = 11.0 mm2 * to5 hermetically sealed metal housing with concentrator lens, 1 isolated pin and 1 case pin * 10âµw/cm2 peak radiation results a current of approx. 140 na Specifications Typical responsivity at peak wavelength: 0.130/aw Wavelength of max. Spectral responsivity: 280 nm Responsivity range (s=0.1*smax): 221 - 358 nm Sensitive area (chip size = 0.20 mm2): 11.0 mm2 Dark current (1v reverse bias): 0.7 fa Capacitance: 50 pf Short circuit (10uw/cm2 at peak): 140 na Temperature coefficient: < 0.1 %/k Operating temperature: -55 - +170 'c Storage temperature: -55 - +170 'c Soldering temperature (3s): 260 'c Reverse voltage: 20 v
High speed carbon dioxide sensor ndir co2 sensor sprintir summary Sprintir is a high speed (20 hz) co2 sensor, ideally suited for applications which require capture of rapidly changing co2 concentrations including metabolic assessment and analytical instrumentation. Fast, accurate carbon dioxide sensor The sprintir carbon dioxide sensor is the fastest, most accurate co2 sensor on the market. A breakthrough in ndir technology, the sprintir uses advanced solid state indium antimonide ledâ??s and detectors to offer a robust sensor with no moving parts, no heated filaments, and incredibly low power requirements. The sensor comes in four versions - from 0% to 100% - all capable of the same high-speed co2 measurement. This makes the sprintir especially useful in biological applications. * high speed sensing (20hz) * measurement ranges from 0 to 100% * 3.3v supply * low power requirement 35mw * flow through adaptor (optional) High speed carbon dioxide sensor ndir co2 sensor sprintir specifications Measurement range: 0-5%, 0-20%, 0-60%, 0-100% Accuracy: â±70 ppm +/- 5% of reading Measurement noise:
INFRARED SENSORS SMTIR9901/02 Typical applications * contactless measurement of surface temperatures or infrared radiation * temperature measurement on moving objects * continuous temperature control of manufacturing * thermal alarm systems * climate control * medical instruments * home appliances Features High accuracy High sensitivity (110 V/W) Low resistance (50 Kohm) and therefore Very good signal-to-noise-ratio Good response time (40 ms) Low cost thin film technology Introduction The Smartec infrared sensors SMTIR9901 and SMTIR9902 are sophisticated full silicon infrared sensors which can be used in measuring the radiation temperature without any contact. For the different radiation temperature ranges various filters are available. The sensor type SMTIR9902 contains a temperature sensor for measuring the temperature of the sensor itself. The temperature range of the sensor-element is between - 40 to 100 'C. The sensor is available in a standard TO-05 encapsulation and with a 5.5. µm. high pass filter. Easy and accurate measuring of the sensors temperature by means of a built-in temperature sensor (only for type SMTIR9902).
FS5001B series mass flow sensors are designed for general purpose flow monitoring and control applications. The sensors directly measure mass flow in the designed channel with trace flow detection capability. The lowest flow it can detect is 20 uL/min. These sensors can readily be applied for manifold flow assembly, leak detection, HVAC control, clean room air flow or nitrogen flush monitoring and control, environmental equipments such as air sampler, analytical instrumentation such as GC spectrometer. FS5001 can be configured to measure flow full scale from 100 sccm to 1000 sccm (1 SLPM). With a full spectrum of customizable adaptors, it can be plug-and-play in many applications. Features and Applications - Low mass flow detectable from 0 ~ 200 sccm up to 0 ~ 1000 sccm - Outstanding accuracy of 2.0% - Response time < 10 ms - Pressure rating up to 5 bar (73 psi) - Output: analog or both analog and digital
FS7002 series mass flow/clog sensors can be used for open air space flow measurement or applied for clog sensing in an open space configuration. The sensor can measure air flow up to 10 m/sec with a fast response. The compact design make the installation an easy task. Examples are clog sensing in LCD projector; HVAC air flow monitoring, air fresher and fan status monitoring. Features and Applications - Measure open space air flow up to 10 m/sec - Fast response < 20 msec - Compact miniature design - Excellent sensitivity - Bi-direction capability - Additional customization available
FS1015CL series mass flow sensors are specially designed for medical equipment flow monitor and control applications, and are made with world leading proprietary MEMS mass flow designed channel with a low pressure loss. The current models can be readily applied to ventilators and anesthesia equipments. These sensors can also be sterilized in medical liquids for reuse or hygienic purposes. FS1015 Series can measure a flow up to 150 SLPM. ISO-15mm connection model is readily applicable to ventilators and/or anesthesia equipments. Features and Applications - MEMS thermal mass flow sensor - Excellent rangeability with integrated multiple sensing elements - High stability at null and full scale - Fast response - Low power consumption - Low pressure loss
FS4003/08 series mass flow sensors are designed for general purpose flow monitor and control applications, and are made with world leading proprietary MEMS mass flow sensors and the smart electronic control system. The sensors directly measure mass flow in the designed channel with a low pressure loss. These sensors can readily be applied for electronics flow meters for anesthesia equipments, clean room air flow or nitrogen flush monitor and control, environmental equipments such as air sampler, analytical instrumentation such as GC spectrometer. FS4008 can be configured to measure flow up to 50 SLPM. It can be applied for gas flow measurement and/or control equipments. Applications include electronic flow meter for anesthesia equipments, clean room gas flow monitor, air sampler, and gas analyzer. Features and Applications - Designed for 3 and 8 mm package - Mass flow detectable from 0 ~ 2 SLPM to 0 ~ 50 SLPM - Exchangeable connectors for easy installation - Digital and analog output provide easy access for various communications - Compact design ready for multiple channel assembly - Excellent for electronic meters in anesthesia equipment - Fast response and low power consumption - Low pressure loss
FS4001 series mass flow sensors are manufactured using MEMS flow sensor and package technology. The sensors are specially designed for low flow rate range applications from 0 ~ 30 sccm up to 0 ~ 1000 sccm. The maximum flow rate for each model is manufactured via specially designed package as well as smart electronics so that the optimal sensitivity would be achieved. Features and Applications - Low mass flow range from 0 ~ 30 sccm up to 0 ~ 1000 sccm - Outstanding accuracy of ±1.5 % - Fast response (4 ms selectable) - Pressure rating up to 5 bar (73 psi) - Analog and/or digital user interface - Easy installation
INFRARED SENSOR WITH SILICON LENS SMTIR9902SIL Typical Applications * Contactless measurement of surface temperatures * Temperature measurement of moving objects * Remote measurement due to small angle of view * Climate control * Medical instruments Introduction The Smartec infrared sensor type SMTIR9902SIL is a standard Smartec SMTIR9902 sensor equipped with a silicon lens for measuring radiation temperatures within a small angle of view (7.27'). The SMTIR9902SIL contains a NI1000 temperature sensor for measuring the temperature of the sensor itself. The temperature range of this internal sensor is -20 to 100 'C. The sensor is mounted in a modified TO-05 encapsulation.
Zirconia O2 Sensors Probe Series - Short Housing The Probe Range of zirconium dioxide oxygen sensors are available in three lengths. Suitable for aggressive and polluted applications such as boiler exhausts. Longer probes are an ideal solution for thicker walled, insulated flue pipes. FEATURES * Zirconium dioxide (ZrO2) sensing elements * Long life, non-depleting technology * Integral heating element * High accuracy * Requires an external interface board to operate BENEFITS * No reference gas required * No need for temperature stabilisation * Compact enclosure TECHNICAL SPECIFICATIONS Heater voltage Operating (standard response) 4V DC ± 0.1V DC (1.7A) Standby 1.65V DC (0.7A) Operating (fast response) 4.35V DC ± 0.1V DC (1.85A) Standby 2V DC (0.85A) Pump impedance at 700'C < 6kΩ Permissible gas temperature -100'C to +250'C Gas flow rate 0 ~ 10 m/s Repetitive permissible acceleration 5g Incidental permissible acceleration 30g OUTPUT VALUES Oxygen pressure range 2mbar ~ 3bar max Accuracy 5mbar max Internal operational temperature 700'C Response time (10 - 90% step) Standard response sensor < 15s Fast response sensor < 4s Warm up time (prior to sensor operation) 60s Warm up time (from standby) 20s Output stabilisation time ~ 180s
SO-E2-960 Limiting Current Type Sensor Oxygen Sensors When voltage is applied to a zirconia electrolyte cell, oxygen is pumped through the zirconia disc from the cathode side to the anode side because the carriers of the current flowing through the zirconia electrolyte are oxygen ions. By attaching a cap with a pinhole on the cathode side of the cell and by increasing the voltage over the cell the current shows saturation due to the rate limiting step in the transfer of oxygen to the cathode. This saturation current is called limiting current and is nearly proportional to the ambient oxygen concentration. Below the advantages of the oxygen sensor: measuring range 1.00 to 96.0 vol.% oxygen High accuracy For many types a more or less linear characteristic Small temperature dependence of the sensor signal Low interference with other gases Long service life In many cases "Single point calibration" necessary only once Applications: Medical Laboratory Food industry Household/Gastronomy Measuring technique Security technology/Monitoring (Electrical-) industry Characteristic Data: Measuring gas: Oxygen concentration Measuring medium: Gaseous atmosphere Measuring principle: Limiting current type sensor Measuring ranges: 1.00 - 96.0 vol.% O2 Response time (t90): 2 to 25 sec. (Depends on: sensor type, gas flow, measuring chamber) Sensor voltage / heating voltage / power consumption / heater cold resistance Sensor voltage: 0.7 to 1.6 Volt Heating voltage: 3.6 - 4.4 Volts Power consumption: 1.3 to 1.8 Watts (depends on application and packaging) Cold resistance: R( 25'C ) = 3.25 ohm ± 0.20 ohm Warm up time: Min. 30 s
Zirconia O2 Sensors Probe Series - Long Housing FEATURES * Zirconium dioxide (ZrO2) sensing elements * Long life, non-depleting technology * Integral heating element * High accuracy * Requires an external interface board to operate BENEFITS * No reference gas required * No need for temperature stabilisation * Two lengths available; 220mm and 400mm TECHNICAL SPECIFICATIONS Heater voltage Operating 4V DC ± 0.1V DC (1.7A) Standby 1.65V DC (0.7A) Pump impedance at 700'C < 6kohm Permissible gas temperature Standard temperature -100'C to +250'C High temperature -100'C to +400'C Gas flow rate 0 - 10 m/s Repetitive permissible acceleration 5g Incidental permissible acceleration 30g OUTPUT VALUES Oxygen pressure range 2mbar - 3bar max Accuracy 5 mbar max Internal operational temperature 700'C Response time (10 - 90% step) < 15s Warm up time (prior to sensor operation) 100s Warm up time (from stand by) 20s Output stabilisation time ~ 180s
MB1240 XL-MaxSonar-EZ4 High Performance Ultrasonic Rangefinder Product Description The XL-MaxSonar-EZ4 has the highest noise tolerance and narrowest beam of any of our indoor sensors. The sensor is designed and calibrated to provide reliable range information to large targets even in environments with strong acoustic or electrical noise sources. MB1240 Features and Benefits * Narrowest beam in the XL-MaxSonar-EZ/AE sensor line * Low power consumption * Easy to use interface * Large target detection * Acoustic noise rejection * 3.3v to 5.5v operational voltage MB1240 Applications and Uses * Great for people detection * Security * Motion detection * Recommended for multi-copters and UAV's * Used with battery power * Autonomous navigation * Educational and hobby robotics * Collision avoidance -
Mb7389 Hrxl-maxsonar-wrmt High performance ultrasonic precision rangefinder Product description The hrxl-maxsonar-wrmt ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications. Mb7389 features and benefits * factory calibrated beam width * low operating voltages from 2.7v to 5.5v * all range outputs are active simultaneously * superior clutter rejection Mb7389 applications and uses * bin level measurement * tank level measurement z
