SONIC-ANEMO-DVC Ultrasonic Wind Speed Sensor Description: As Worldwide Premiere launch, a specific version of the CV7-V which connects directly to the wind sensor input on Davis instruments. This sensor will allow the replacement of mechanical anemometers / wind vanes with no need of anything else but power supply. Itâ??s an exclusive and useful product for both, professionals and well-informed amateurs. SONIC-ANEMO-DVC Ultrasonic Wind Speed Sensor Specification: * Output rat: 2 Hz / 30 Hz measurement * Wind module sensitivity: 0.12 m/s * Wind module resolution: 0.05 m/s (16 bits) * Wind module dynamic: 0.12 to 40 m/s * Direction sensitivity: +/-1.5' * Direction resolution: 1' (9 bits) * Power supply: 2.7 V to 35 V DC * Electrical consumption: 2.6 mA Avg. @ 12 V * Op. temp. without icing: -15'C to +55'C
Y504-A Dissolved Oxygen Sensor Description The sensor is based on optical fluorescence lifetime quenching technique. Its technical procedure meets ASTM D888-09 standard for optical sensing of dissolved oxygen. This online sensor is developed to integrate with Yosemite wireless monitoring system. Its rugged design and large measurement range make it ideal for sampling, flow cell, ground water and waste water measurements. Y504-A Dissolved Oxygen Sensor Applications Fish farmer, waste water plant, river, stream, and ocean monitoring Y504-A Dissolved Oxygen Sensor Feature * 0-20mg/L or 0-200% Saturation * 0~50 'C; IP68 rating * Membraneless, no electrodes design * No oxygen consumption * Flow Independent * Automatic temperature compensation * No H2S Interference * Low Drift, fast response, and more accurate * Low Maintenance, low operating cost * Easy sensor cap replacement * RS-485; MODBUS protocol compatible Y504-A Dissolved Oxygen Sensor Technical Specifications * Range: 0-20mg/L or 0-200% Saturation * Response Time: 10 sec * Housing IP Rating: IP68 * Accuracy: 1% * Drift: -
SONIC-ANEMO-SDI Ultrasonic Wind Speed Sensor Description SONIC-ANEMO-SDI is made from the CV7-V to which a SDI12 protocol and optimizing electrical consumption has been added. Sample rate is 2 Hz. This ultrasonic wind sensor operates in a request-response mode. This product is more energy-efficient than standard units. The SONIC-ANEMO-SDI is dedicated to meteorological applications. SONIC-ANEMO-SDI Ultrasonic Wind Speed Sensor Available data: - Average speed and direction over 10 minutes - Minimum wind speed and direction for that period - Maximum wind speed (gust 3s) and direction for that period - Software version and serial number - Data measurement quality rate from the sensor - Data for sensor diagnostic (manufacturer use only) SONIC-ANEMO-SDI Ultrasonic Wind Speed Sensor Specification: * Output rate: 2 Hz / 30 Hz measurement * Wind module sensitivity: 0.12 m/s * Wind module resolution: 0.05 m/s * Wind module dynamic: 0.12 to 40 m/s * Direction sensitivity: +/-1.5' * Direction resolution: 1' * Power supply: 2.7 V to 35 V DC * Electrical consumption: 2.9 mA Avg. @ 12 V * Op. temp. without icing: -15'C to +55'C -
CV7-OEM Ultrasonic Wind Speed Sensor Description CV7-OEM shows the same features as the CV7 standard: light, compact and low energy consumption. With this OEM version of the Static Wind Transducer CV7, you can add an accurate Ultrasonic Wind Sensor to your own products and installations. It is powered by 8-30 VDC power supply and it outputs RS232/RS422/NMEA0183 signal. CV7-OEM Ultrasonic Wind Speed Sensor Specification: * Output rate: 2 Hz / 30 Hz measurement or *4 Hz / 60 Hz meas. * Wind module sensitivity: 0.12 m/s * Wind module resolution: 0.05 m/s * Wind module dynamic: 0.12 to 40 m/s * Direction sensitivity: +/-1.5 degree * Direction resolution: 1 degree * Power supply: 8 V to 30 V DC * Electrical consumption: 9 mA * Op. temp. without icing: -15 degree C to +55 degree C -
CV7-E Ultrasonic Wind Speed Sensor Description The CV7-E is easily integrated into measurement and monitoring systems. Detects gusts with great responsiveness and low latency. The CV7-E is powered by 8-30 VDC power supply and it outputs RS232 / RS422 / 5 V level signal / NMEA0183. The CV7-E shows a data rate twice faster than the CV7 and CV7-V with a data output 4 per second. The small size of this sensor makes it very discreet. Like every LCJ Capteurs products, CV7-E is energy efficient. CV7-E has proved its value with universities â??laboratories, scientific and wind tunnels successful tests. It can be used connected to a PC and to any system featuring a NMEA® input port. CV7-E Ultrasonic Wind Speed Sensor Specification: * Output rate: 4 Hz / 60 Hz measurement * Wind module sensitivity: 0.12 m/s * Wind module resolution: 0.05 m/s * Wind module dynamic: 0.12 to 40 m/s * Direction sensitivity: +/-1.5 degree * Direction resolution: 1 degree * Power supply: 8 V to 30 V DC * Electrical consumption: 9 mA * Op. temp. without icing: -15 degree C to +50 degree C -
Y511-A Turbidity Sensor Description Automatic cleaning turbidity sensor is complied with ISO 7027 Turbidity Standard. The turbidity sensor can be deployed in-situ and provide very stable data over long period of usage, which helps to ensure the quality of your measurements. Y511-A Turbidity Sensor Typical Applications Water quality monitoring, waste water testing, process water and aquaculture monitoring. Y511-A Turbidity Sensor Features * 0.1~1000 NTU * Accuracy -
IRceL CH4 NDIR CH4 Sensor Description Miniature infrared sensor with on-board EEPROM and thermistor IRceL CH4 NDIR CH4 Sensor Key Features & Benefits: * Integrated thermistor for accurate temperature compensation * EEPROM programmed with sensor specfic performance characteristics * Compact Size IRceL CH4 NDIR CH4 Sensor Technical Specifications * Operating Principle: Non-Dispersive Infra-Red * Measurement Range: 0-5% vol. Methane * Accuracy (-20'C to +50'C): Within ± (0.1% vol CH 4 + 4% of concentration)â?? * Response Time (T90): < 35 Seconds * Supply Voltage: 3-5 VDC, 3.3 V to utilise EEPROM calibration * MTBF: > 5 years -
MICROceL CF Carbon Monoxide Sensor (CO sensor) Description MICRO 3-electrode carbon monoxide sensor with inboard filter. MICROceL CF Carbon Monoxide Sensor (CO sensor) Key Features & Benefits * A robust carbon monoxide sensor suitable for portable life safety applications * Extremely small size MICROceL CF Carbon Monoxide Sensor (CO sensor) Technical Specifications * Operating Principle: 3-electrode electrochemical * Measurement Range: 0-500 ppm CO * Sensitivity: 0.045 ± 0.01 uA/ppm * T50 Response Time: -
MB7040 I2CXL-MaxSonar-WR High Performance Ultrasonic Precision Rangefinder MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Product Description Weather Resistant (IP67) Sensors, and Optional Chemical Resistance The industrial outdoor I2CXL-MaxSonar-WR sensors have a robust PVC housing designed to meet IP67 water intrusion. The sensors provide short to long distance detection and ranging with a narrow beam pattern. The I2CXL-MaxSonar-WR outdoor ultrasonic sensors have high power output, noise rejection, auto calibration, and factory calibrated beam patterns. In addition to the standard I2CXL-MaxSonar-WR, has developed the Fâ??Option for additional protection necessary in a few hazardous chemical environments. Extremely corrosive gases or liquids can degrade or compromise the operation of the sensing unit. As a result, we offer a more chemically inert seal which allows our sensors to operate in all but the harshest of chemical environments. In addition to the chemical resistance the sensor has improved performance in wet or dust environments. MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Product Specifiations * Resolution of 1 cm * Up to 40Hz reading rate * RoHS Compliant * Operates from 3.0-5.5V * IP67 rated, I2C interface ultrasonic sensor * Maximum range of 765 cm (300 inches) * Operational Temperature from -40'C to +70'C MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Features and Benefits * Low power consumption * Narrow, controlled beam * Easy to use interface * Detects smaller objects * Can be powered by many different types of power sources MB7040 I2CXL-MaxSonar-WR Ultrasonic Rangefinder Applications and Uses * People detection * Security * Motion detection * Useable with battery power * Autonomous navigation * Educational and hobby robotics * Collision avoidance -
SONIC-ANEMO-MICRO Ultrasonic Wind Speed Sensor Description: As a result of its very special electronic architecture the SONIC-ANEMO-MICRO shows a very low electrical consumption. It is ideal for remote stations or mobile installation. SONIC-ANEMO-MICRO is an OEM sensor designed for integration in other original Equipment. This sensor shows a very low consumption. It operates from 300µA. SONIC-ANEMO-MICRO is the lowest consumption power solution of all LCJ sensors. SONIC-ANEMO-MICRO Ultrasonic Wind Speed Sensor Specification: Output data format: ASCII format, avaibility Information transmited: Instant. W. Speed, Instant. W. Angle, avaibility Output rate: select. 1 meas. and Tx: every 1,6 or 18 s Wind module sensitivity: 0.12 m/s Wind module resolution: 0.05 m/s Wind module dynamic: 0.12 to 40 m/s Direction sensitivity: +/-1.5 degree Direction resolution: 1 degree Power supply: 3 V to 3.6 V DC Electrical consumption: 200µA avg Op. temp. without icing: -15 degree C to +50 degree C Cable: 50 cm / 4x0.22 mm2 Connection: 4 wires Weight of the head: 100 gr Weight of unit assembly: N/A Mounting: N/A
CV7-V Ultrasonic Wind Speed Sensor Description The CV7 is easily integrated into measurement and monitoring systems. The CV7-V is powered by 8-30 VDC power supply and it outputs RS232/RS422 (5V level signal) / NMEA0183. CV7-V Ultrasonic Wind Speed Sensor Application Static wind sensor A conventional wind vane/anemometer features mechanical rotating parts. These moving parts expose the sensor to failure. CV7 series was extensively tested in Marine applications for both precision and robustness. Configurable wind sensor CV7-V can be programmed and configured for : angle correction, smoothing time constant, units of measurement and interface format. CV7-V connexion CV7-V can be used connected to a PC and any systems featuring an NMEA® input port and specific pieces of equipment using conventional formats. In PC mode, this bidirectional sensor can be set up for angle correction, damping, measure units and interface format. Quality All LCJ Capteurs are designed and manufactured in the Nantes region in France where they are fully tested throughout the manufacturing process. CV7-V Ultrasonic Wind Speed Sensor Specification: Output data format: NMEA0183; MWV, XDR Information transmited: Instant. W. Speed, Instant. W. Angle, avaibility Output rate: 2 Hz / 30 Hz measurement Wind module sensitivity: 0.12 m/s Wind module resolution: 0.05 m/s Wind module dynamic: 0.12 to 40 m/s Direction sensitivity: +/-1.5 degree Direction resolution: 1 degree Power supply: 8 V to 30 V DC Electrical consumption: 9 mA Op. temp. without icing: -15 degree C to +55 degree C Cable: 25 m / 4x0.22 mm2 Connection: 4 wires Weight of the head: 100 gr Weight of unit assembly: 200 gr with mounting part Mounting: Vertical ; 300 aluminium arm, 16 mm
MB1444 USB-ProxSonar-EZ4 High performance USB ultrasonic proximity detection sensor MB1444 High Performance USB Ultrasonic Sensor Product Description The USB-ProxSonar-EZ4 has a detection zone of ~1 feet and will allow for 15+ simultaneous sensors. These ultrasonic proximity sensors detect objects in a calibrated detection zone. The USB-ProxSonar-EZ sensors report when an object (such as a person) enters the detection zone. The target is released after leaving the USB-ProxSonar-EZ detection zone. MB1444 High Performance USB Ultrasonic Sensor Product Specifications * USB interface * ~2.5 second target acquire time* * ~1.5 second target release time* * Automatic multi-sensor operation * People sensor * Resolution of 1 inch * Maximum Range of 125 inches (318 cm) * Detection zone range of 12 inches (30 cm) * 42kHz Ultrasonic sensor measures distance to objects * RoHS compliant * Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches * Small, light weight module * Designed for easy integration into your project or product * Short range detection
1. Biolight Adult Finger clip Spo2 sensor,7pin 2. Connector: Round 12 pins; 3. Compatble models: Biolight digital monitor M7000,M8000, M9000,M9500 4. Cable materials: TPU 5. We also can offer Biolight digital monitor A3,A5,A6,A8. 6. Types:Adult finger clip SpO2 sensor, Adult Silicone Soft Rubber SpO2 sensor, Pediatric Clip SpO2 sensor, Pediatric Silicone SpO2 sensor, Neonate Wrap SpO2 sensor, Neonate Y type SpO2 sensor, Adult Ear Clip SpO2 sensor, Animal ear clip SpO2 sensor; 7. Related Products:Spo2 sensor, Spo2 Extension Cable, ECG Cable with leadwires, IBP Cable, Disposable Transduer, NIBP Cuff, NIBP Tube, Temperatrue Probe.
1.4 frequencies selectable for long distance and stacking installation 2.Double-precision digital display signal strength 3.Interruption time adjustable, user can adjust it according to environment and scenes 4.Intelligent heating function, effectively eliminate ice and frost, adapt to harsh environment 5.Progressively infrared signal processing functions (comparable with AGC function) to ensure the item work in wind,frost,snow,fog,moisture,direct sunlight and other bad weather etc. 6.Digital CPU control circuit to control the transmitter and receiver 7.Optional assisting equipment for alignment infrared beam, improving the efficiency 8.Wide range voltage design, power supply between AC/DC12-24V,easy for centralized power supply. 9.A variety of applications C relay outputs 10.Tamper switch, open if the cover is removed 11.Waterproof grade: IP65 12.Alignment angle horizontally ±90ï¼?vertically ±10
Innovative Weather Monitoring Especially ideal for mobile installations, Magellan MX Weather Stations combine the convenience of an all-in-one multi-parameter weather sensor with an internal compass and GPS. Four different models offer sensor options including: * Ultrasonic wind speed and direction measurement * A combined temperature, pressure, humidity instrument mounted inside three double louvered, naturally aspirated radiation shields * Optical rain gauge provides measurements based on the size and number of drops MX600: rain gauge, ultrasonic wind speed and direction, temperature, relative humidity, air pressure, compass, GPS MX500: ultrasonic wind speed and direction, pressure, temperature, relative humidity, compass, GPS MX300: pressure, temperature, relative humidity (no compass or GPS) MX200: ultrasonic wind speed and direction only, compass, GPS Magellan MX Weather Stations Feature * Weather-protected sensor unit designed for maximum portability and utility * GPS for compensated wind speed * Automatic self-alignment of wind direction using internal compass * No mechanical components means virtually no maintenance * Low power consumption ideal for battery or solar-powered installations * One-year warranty Sensor Specifications Temperature Range: -40 to +70'C (-40 to +185'F) Accuracy: ±0.3'C (20'C); ±0.54'F (68'F) Resolution: 0.1'C (0.18'F) Units: 'C, 'F Barometric Pressure Range: 8.85 - 32.48 inHg (300 - 1100 hPa) Accuracy: ±0.015 inHg (±0.5 hPa) @ 77'F(25'C) Resolution: 0.003 inHg (0.1 hPa) Units Available: kPa, hPa, mbar, inHg Wind Speed Range: 0-134mph (0-60 m/s) Accuracy: ±3% 0.02 mph to 90 mph (±3% 0.01m/s to 40 m/s), ±5% above 90 mph and up to 134 Resolution: 0.02 mph (0.1 m/s) Units Available: knots, mph, km/hr, m/s Wind Direction Range: 0 to 359' Accuracy:± 3' 0.02 mph to 90 mph (0.01 m/s to 40 m/s), ±5' above 90 mph and up to 134 mph (40 m/s and up to 60 m/s) Resolution: 1.0' Relative Humidity Range: 0 to 100% Accuracy: ± 2% @ 68'F (10%-90% RH) Resolution: 1.0% Precipitation Accuracy:±2% at
Features * oxygen pressure range 2 mbar - 3bar * zirconium dioxide (zro2 ) sensing elements * non-consumption technology * integral heating element * no need for temperature stabilisation * no reference gas required * high accuracy * linear output signal * operates with external interface boards Specifications Heater voltage: Porous cap (15mm): 4.35v dc +/- 0.1v dc (1.85a) Stand by: 2v dc (0.85a) Pump resistance @ 700'C: < 6kOhm Permissible gas temperature: -100 to 250C Gas flow rate: 0 to 10 m/s Repetitive permissible acceleration: 5 g Incidental permissible acceleration: 30 g
Dust Sensor Module DSM501B Description Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor. PWM output of the sensor can be directly connected to μ-com to control fan speed or ventilation and also to display the level of particles. Detectable size of particle is limited to minimum 0.7 μm, and the application for smoke or fire alarm is prohibited. Dust Sensor Module DSM501B Type: DSM501A : 2mm pitch connector type (20010WR-05). DSM501B : 2.5mm pitch connector type (S5B-EH). Dust Sensor Module DSM501B Electrical characteristics: Supply voltage: DC5V +/- 10% Power consumption: 90mA Operating temperature range: -10~ +65'C Operating humidity range: 95%RH or less (without dew condensation) Recommend storage condition: -20~ +80'C Dimension: W59 * H45 * D20 (mm) Detectable particle size: approx. 1um (minimum) Detectable range of concentration: 0 ~ 1.4mg/m3 Output signal: PWM (pulse width modulation) Time for stabilization: 1 minute after power turned on Sensor characteristics: To be maintained in between the upper limit and lower limit of the standard dust sensor unit Dust Sensor Module DSM501B Features: * PWM output * Easy installation * Single power supply * Compact size and lightweight Dust Sensor Module DSM501B Application: * Ventilator etc * Air conditioner * Air quality monitor * Air cleaner or Air purifier
MB7389 HRXL-MaxSonar-WRMT High Performance Ultrasonic Precision Rangefinder High Performance Ultrasonic Precision Rangefinder MB7389 Product Description The HRXL-MaxSonar-WRMT ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications. High Performance Ultrasonic Precision Rangefinder MB7389 Features and Benefits * Factory calibrated beam width * Low operating voltages from 2.7V to 5.5V * All range outputs are active simultaneously * Superior clutter rejection High Performance Ultrasonic Precision Rangefinder MB7389 Applications and Uses * Bin Level Measurement * Tank Level Measurement
Water Leak Detection Sensors are widely used in Telecommunication Outdoor Base Stations, Elevator Shafts, Electric Vehicle Charging Stations and Electric Distributors. When leakage happen in the above equipment and the 2 electrodes of the sensor are immersed in water at the same time, the sensor will trigger the alarm system with which is connected. Application:underground,plant room,etc,used for detecting water leakage. Setup:on ground/wall with screw Detection:Water leakage with LED lamp Materials:Nylon fibre/Alluminium Alloy Origin:China
What's the introduction of Micro Oval Gear Flow Meter ? Micro Oval Gear Low Flow Meter is a kind of oval gear flow meter ,along to positive displacement flow meter. there is thousands of manufacturers who can produce oval gear flow meter. but only several manufacturer who have technology to produce micro liquid flow meter. Micro Oval Gear Flow Meter offer the highest accuracy and measure for various viscosity liquid. special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro Oval Gear Low Flow Meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, Adhesive control ,Hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of Micro Oval Gear Flow Meter? 1) Anti-dust,anti-vibration,anti-corrosive&explosion-proof. 2) Max accuracy up to 0.2% 3) Min flow : 0.1ml/min 4) Max temperature: 200C 5) Max pressure: 1000bar 6) Viscosity liquid:0.3~10000cps.
