1)Material: PVC, PET, ABS or envrionmental plastic
2)Card size: 85.5*54*0.76mm (standard), or according to your request.
3)Thickness:ISO standard 0.76MM,0.6MM,0.5MM,0.3MM
4)Printing Method: Four colors offset printing, silk-screen printing, digital printing
5)Craft available option: magnetic strip,barcode,embossing number, signature panel, Pin number
6)Chip available: Philips Misfire 1K S50,S70,SLE4442,SLE4428,SLF5528,Simens ceries,Temic series, AT24C16, AT24C64, AT series, FuDan Series,EM4100,TK4100, etc
Model: JMY680H
1.Product introduction
JMY680H is a RFID read/write module with an UART/IIC/RS232C serial port. The module has various functions and supports the ISO/IEC14443A&B and ISO15693 and ISO7816 contactless cards. Users operate the module via simple command. The module embedded with SAM slot that operate contact smart card according to ISO7816. The module builds in antenna.
2.Characteristics
PCD model:NXP CL RC632
Working frequency: 13.56MHz
Card supported:Mifare 1K/4K, FM11RF08, Ultra Light, DesFire, Mifare ProX, SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, T=CL smart cards(both ISO14443A & ISO14443B) , TI TagIt, I.Code SLI, ST LRI and other tags according to ISO15693 and ISO7816 SAM cards (both T=0&T=1)
Anti collision ability:Full function anti collision; be able to process multi-cards; be able to set operate single card only
Auto detecting card:Supported, default OFF
SAM slot:1 slot
SAM baud rate:9600bps/38400bps
ISO7816 PPSS set:supported
EEPROM:512 Bytes
Power supply:DC 5V
Interface:IIC/UART/RS232C (select when place order)
Communication rate:IIC:400Kbps
UART: 19.2Kbps/115.2Kbps
Max. command length:254 Bytes
Interface level:UART/IIC: 3.3V (TTL level; 5V tolerance)
Power consumption: 150mA
Operating distance:150mm (depending on card)
Dimension:70mm*50mm*16.5mm
Weight:About 120g
ISP:Supported
Operating temperature: -77 ~ +185¡ãF
Storage temperature: -104 ~ +257¡ãF
RoHS:Supported
3.Protocol
There are UART, IIC or RS232C three optional types of interfaces between the host and module. IIC has the advantage of high communication rate and convenient operation. RS232C has long operation distance. Users select the interface according to the special system.
4.Automatic detecting card
The automatic detecting card function supports the ISO14443A and ISO15693. This function supports only one card operation.
Inner package: box (size: 17.5*14*7cm)
Outer package: carton (size: 48*32*24mm)
Weight: 330g
Terms of delivery: dhl, tnt
Delivery time: 5 working days after receive payment.
Features:
Capacity: 1k/4k/512bit eeprom.
Frequency: 13.56mhz.
Temperatures: -20~50 (humidity 90%).
Communication speed: 106 kbps.
Distance: within 100mm.
Write endurance: >100, 000times.
Data retention: >10 years.
Packaging material: pvc, pet.
Function: as electronic wallets (for small amount buying).
Advantage: supporting many cards operation at the same time; anti-collision..
Delievry in 5 days after the payment is received.
Jmy501 series rf module includs:jmy501a, jmy501c, jmy501d, jmy501e, jmy501g, jmy501h, jmy501m. Each model has its own characteristics.
Model: jmy501h
1.Introduction
Jmy501h is a rfid read/write module with an uart and iic serial port. The module supports iso/iec14443a&b and iso/iec15693 contactless cards. The module has various functions. User operates the module via simple commands. The module has excellent performance and stability. The antenna is separated from the module.
2.Characteristics
Pcd model:nxp cl rc632
Working frequency: 13.56mhz
Card supported:mifare 1k/4k, fm11rf08, ultra light, desfire, mifare prox, sr176, sri512, sri1k, sri2k, sri4k, srix4k, t=cl smart cards(both iso14443a & iso14443b) , ti tagit, i.Code sli, st lri and other iso15693 tags
Anti collision ability:full function anti collision; be able to process multi-cards; be able to set operate single card only
Auto detecting card:supported, default off
Eeprom:512 bytes
Power supply:dc 5v
Interface:iic & uart (selected by sps pin, recommend to use iic)
Communication rate:iic:400kbps, uart:19.2kbps/115.2kbps
Max. Command length:254 bytes
Interface level:3.3v(ttl level; 5v tolerance)
Power consumption: 70ma
Operating distance:100mm(depending on card and antenna design)
Dimension:42mm¡Á21mm¡Á8mm
Package:dip32
Weight:about 15g
Isp:supported
Operating temperature: -77 ~ +185¡ãF
Storage temperature: -104 ~ +257¡ãF
Rohs:supported
3.Antenna
We supply the antennas. There are three models: tx500, tx501 and tx502. The antenna customization is welcomed.
Outer package: carton (size: 48*32*24mm)
Weight: 100g
Terms of delivery: dhl, tnt
Delivery time: 5 working days after receive payment.
JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability.
Qualifications:
PCD: NXP RC500, RC531, RC632, RC400; FM1722
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm(depending on card and antenna design)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default OFF
EEPROM: 512Bytes
Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
Communication rate: IIC--400Kbps, UART--19200bps/115200bps
Max.command length: 511 Bytes
Interface level: 3.3V (TTL level; 5V tolerance)
Power supply: DC5V
Power consumption: 70mA
Dimension: 42mm¡Á21mm¡Á8mm
Package: DIP32
Weight: about 15g
Operating temperature: -77 ~ +185¡ãF
Storage temperature: -104 ~ +257¡ãF
ISP: Supported
RoHS: Compliant
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability.
Qualifications:
PCD: NXP RC500, RC531, RC400, RC632
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 80mm(depending on card and antenna design)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default ON
SAM card slot: 1 slot, 9600bps /38400bps
EEPROM: 512 Bytes
PPSS set: Supported
Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order)
Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps
Max.command length: 511 Bytes
Interface level: 3.3V (TTL level; 5V tolerance)
Power supply: 5.0V
Power consumption: 150mA
Dimension: 70mm¡Á50mm¡Á16.5mm
Weight: about 120g
Operating temperature: -77 ~ +185¡ãF
Storage temperature: -104 ~ +257¡ãF
ISP: Supported
RoHS: Compliant
MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the LCD display modul(128x64). They support boot screen & idle screen set and picture storage etc. The interface is USB PC/SC. They can be directly used the Windows operating system with driver and the API functions. The development cycle simple and short. The reader not only supports series IC cards according to ISO14443 TypeA/B, ISO15693 but also SAM cards compliant with ISO7816 (T=0 and T=1).
Qualifications:
PCD: NXP RC531, RC632; RC400, RC500(select)
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm (Mifare One, normal distance)
SAM card slot: 2 slots, (supports ISO7816 T=0 and T=1)
Interface: USB PC/SC
Power supply: USB DC5V
Power consumption: 150mA
LED: four LED (red, green, blue, yellow)
Dimension: 123mm ¡Á 88mm ¡Á 25mm
Weight: About 200g
Operating temperature: -77 ~ +185¡ãF
Storage temperature: -104 ~ +257¡ãF.
Standard: ISO/IEC14443-A;ISO/IEC14443-B;ISO/IEC15693
Interface: USB/RS232, TCP/IP
Baud Rate: 9600-115200bit/s
Card Support: Mifare One S50; Mifare One Ultralight; MifareOneS70;MifarePro; I-code2; TI RFID Tag-it HF-I,EM4135,EM4034
Reading distance: 3-15cm
Dimension: 100mm¡Á100mm¡Á27mm
Power: USB or 5VDC, POE
Current: <150mA (USB, RS232) <200Ma(TCP)
Work Temp: -20 to +70
Housing: ABS.
As MingWah design Card packing details Box size: 22*9*5.5cm 200 pcs Carton 1 size: 47*23.5*18cm 15 Box in one Carton 3000 pcs in total Carton 2 size: 47*25*27cm 20 Box in one Carton 4000 pcs in total Carton 3 size: 47*25*32 cm 25 Box in one Carton 5000 pcs in total Proposal 2: Customized.
Protocol: ISO14443A/B & ISO7816 T=0,T=1 CPU Card;
Port: RS232/USB Plug and Play
Support card (contactless)
mifare® Std 1k¡¢mifare® Std 4k¡¢mifare® UltraLight¡¢mifare® DESFire mifare® Pro ¡¢SHC 1102
Power supply: USB or 5VDC Current: <200mA
Durability: 10,000,000 times
Support card (contact)
AT24C01/24C02/24C04/24C08/24C16/
AT24C64£¬AT88SC102£¬AT88SC1604/1604B£¬AT45D041£¬AT93C46/93C46A¿¨
SLE4432/4442£¬SLE4418/4428£¬SLE4404£¬SLE4406
2 SAM cassettes
Weight: 300g
Work Temp: -10 to +60
Casing: ABS .
Protocol: ISO/IEC14443 Type A/B
Support contact & contactless CPU card, Mifare one S50/ S70/ Ultralight, Mifare Pro
Dimension: 95mm*95mm*22mm
Read distance: 30 mm-100 mm
Port: RS232/USB Plug and play
Buzzer, LED indicator
Power supply: USB / DC 5.0V Current: <150 m A
Work Temp: -20 - +70
Casing: ABS .
IC smart card
1.PVC, PET
2. CR80 85.60 x 53.98mm
3.Compatible with SLE4442/4428
3.Complies with ISO7810-7816 standard .
Proposal 1: As MingWah design Card packing details Box size: 22*9*5.5cm 200 pcs
Carton
1 size: 47*23.5*18cm 15 Box in one Carton 3000 pcs in total Carton
2 size: 47*25*27cm 20 Box in one Carton 4000 pcs in total Carton
3 size: 47*25*32 cm 25 Box in one Carton 5000 pcs in total Proposal
Unlike contact cards,Contactless smart cards apply an embedded antenna that is attached to the chip to transfer information stored in the chip's memory to a remote computer. Contactless cards do not have to be inserted into a card acceptor device. They need only be delivered within range of a radio frequency acceptor to read and store information in the chip. The operation range is normally from about 2.5" to 3.9" (63.5mm to 99.06mm) .
