YST307GU series are RFID reader/writer module which pick or send command by USB ports. YST307GU series meet kinds of international contactless IC card standards. Also YST307GU series can support kinds of cards from suppliers. YST307GU series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Characters: The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Qualifications PCD: NXP RC400 Working frequency: 13.56MHz RF standard: ISO15693 SAM card slot: 2 Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only. Auto detecting card: yes, default OFF EEPROM: 4K Interface: USB Max command length: 1024 Bytes Interface level: 3.3V Power consumption: 50mA Dimension: 80mm*60mm*8.5mm Package: DIP32 Weight about:100g
YST307AS series are RFID reader/writer module which pick or send command by RS232 ports. YST307AS series meet kinds of international contactless IC card standards. Also YST307AS series can support kinds of cards from suppliers. YST307AS series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Characters: The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Qualifications PCD: NXP RC500 Working frequency: 13.56MHz RF standard: ISO14443A, ISO7816 SAM card slot: 2 Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only. Auto detecting card: yes, default OFF EEPROM: 4K Interface: RS232 Max command length: 1024 Bytes Interface level: 3.3V Power consumption: 50mA Dimension: 80mm*60mm*8.5mm Package: DIP32 Weight about:100g
Introduction: When the card approach the reader, the red light turn into green;after glinting to turn redcolor again, the buzzer sound shows transiting data.It has 500ms proximity time distance for card proximity. Features: Model Acr-101 Size 122x 46x 23mm Color Dark grey Voltage Dc5~16v Current =100ma Ambient temperature -25-75 Reading range 5~15cm Output format Wiegand 26/34, rs485/232 Card type Em-id/mifare-ic Comunication distance Wg=100m, rs485=1200m
The S2-EM is a compact, waterproof stand-alone programmable access control system. The product unique feature is simple in design, easy operation, and high reliability. Main Feature > Waterproof, conforms to IP66 > One relay, 2000 users, standalone > Card type: 125KHz EM card only > Working temperature: -40 oC ~ 60 oC (-40 oF ~ 140 oF) > Pulse mode, toggle mode > Built in LDR for anti tamper > Card block enrolment > Easy for programming by master cards and remote control > Easy for install, 6 wires only
Key features: Dc5v power supply from usb; usb com port; Compliant with iso14443a/b, iso15693, iso7816 t=1 standard; Support read/write contactless series cards and contact smart sam cards. Embedded with one smart contact card socket under iso7816 t=1 standard; Available to operate desfire picc level, application id create/delete/format, etc Support to create standard datafile&backupfile, and valuefile, recordfile, etc Dimension with 80mmx84mmx12mm, Internal led&buz for status indication, one smart sam card socket. Technical parameters: Electrical specification Power supplydc 5v from usb Power consumption max current
> IK10 anti collision > Metal Case, anti-vandal > Waterproof, conforms to IP66 > Wiegand 26~44, 56, 58 bits output > Card Type: 125KHz Hid & EM cards, 13.56MHz NXP Mifare, Mifare Plus, DesFire, Mifare Pro, Mifare UltraLight, Mifare Class 4K cards > Reading range: 3~8cm > External LED Control & External Buzzer Control
Key features: Frequency available with 125khz 3.3v ~ 5v dc power supply, uart-ttl interface R/w or read-only uid of t5577 and its compatible cards; Available to set to read different page or block address with password; Optional output as wg26, wg34 or uart ttl External antenna, reading range up to 5~7cm External led&buz available( external driver circuit needed Technical parameters: Electrical specification Power supply dc 3.3v-5v Power consumption < 45ma Operation frequency 125khz Baudrate 9600~115200 bit/s ( default 9600bps) Interface uart ttl Antenna external, stamp-hole Reading range 50- 70mm (depends on tag and antenna size) Mechanical specifications Dimension 25mmx16.5mmx2.8mm (lxwxh) Weight 3g Material fr-4, blue Model chk102mt Environmental conditions Operation temperature -20 +80 degree Storage temperature -40 +85 degree Humidity relative humidity 595% Supported standard/ tags T5567,T5577 and compatible cards Sdk information Demo software windows, c# program language Files comprotocol document User manual Demo.Exe
Protocol: ISO/IEC14443 Type A/B Support contact & contactless CPU card, Mifare one S50/ S70/ Ultralight, Mifare Pro Dimension: 95mm*95mm*22mm Read distance: 30 mm-100 mm Port: RS232/USB Plug and play Buzzer, LED indicator Power supply: USB / DC 5.0V Current:
Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722(followed shanghai encipherment standard, custom-made) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, supported ISO7816 T=0, supported 9600bps & 38400bps Interface: RS232C or USB (build-in CP2102 USB to RS232 converter) Baud rate: 9600 ~ 115200 BPS Power supply: DC5V Power consumption: 180mA Dimension: 123mm¡Á88mm¡Á25mm Weight: about 150g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF 1pc/box, 16*12*5cm.
Key features: Dc5v power supply from usb; usb com port; Compliant with iso14443a/b, iso15693, iso7816 t=1 standard; Support read/write contactless series cards and contact smart sam cards. Embedded with one smart contact card socket under iso7816 t=1 standard; Available to operate desfire picc level, application id create/delete/format, etc Support to create standard datafile&backupfile, and valuefile, recordfile, etc Dimension with 80mmx84mmx12mm, Internal led&buz for status indication, one smart sam card socket. Technical parameters: Electrical specification Power supplydc 5v from usb Power consumption max current
