TRH-212 fire air pressure difference controller (expanded economy type)Pressure sensor for building fire supply, pressure sensor for fire protection industry, fire pressure difference controllerThe wind pressure difference controller is used to control the front room, the front room, the fire elevator front room, and the closed refuge floor. The differential pressure controller normally opens the contact closure, and connects the power supply of the control box of the roof bypass pressure relief valve. The top bypass pressure relief valve is opened for air supply and pressure relief, and the bypass pressure relief valve at the top of the building is opened for air supply pressure relief, reducing the pressure difference, when the pressure difference The value is reduced to a certain value, the wind pressure difference sensor contact is disconnected, the roof bypass valve is de-energized, and the bypass valve is closed to stop the pressure relief. Exclusive instrument. Product features are: 1: Using the airbag to expand and pull the high-speed elastic body, 2: After reaching the set pressure, the high-speed action switch point is activated. 3: The way of air source makes the PTJ601 sensor have strong anti-overload capability. 4: There are fine inspection indicators and warning lights on the surface. When working, the inspection indicator green light is on. When the wind pressure is exceeded, the red light is on and there is passive switching action. The main application is in the positive pressure supply of fire. Sense differential pressure control pressure relief valve, residual pressure valve action. There is a small differential pressure control for the purpose of industrial systems. This product is also known as positive pressure air supply sensor, differential pressure measurement controller, wind pressure difference sensor, etc.! Pressure form: gauge pressure, differential pressure Measuring range: 0�100pa Pressure resistance: 10000PA Accuracy level: 3 Operating pressure: front chamber measurement and control: 25 ~ 30PA, (reset pressure: 15 ~ 20PA); Stairwell application: 40 ~ 50PA, (reset pressure: 30 ~ 40PA) Output mode: switching signal (24VDC/4A) Working voltage: 24VDC Medium temperature: -20 ~ 85 ° C Sealing level: IP65 Overload capability: 150% FS Dimensions: 172*112*60 Weight: 350g
PSMU Series PM2.5/PM1.0 Particle Sensor Description PSMU Series, in which SAMYOUNG S & C's 20years knowledge and technology are concentrated, is a PM2.5/PM1.0 dedicated sensor with a radical improvement for detection capability at ultra-fine particle range - 0.3μm~1.0μm, which assures PM2.5/PM1.0 weight concentration values more accurate than conventional presumptive sensors. PSMU Series which performs higher accuracy along with improved sensitivity than conventional sensors provides reliable information to users enabling more accurate and sophisticated control in the applications such as air purifiers, air conditioners and air quality measuring devices. PSMU Series PM2.5/PM1.0 Particle Sensor Features * Detectable Particle Size - 0.3m Real-time PM2.5/PM1.0 * UART Output - g/m3 * Excellent Accuracy * High Linearity and Uniformity * Market-proven Reliability and Durability PSMU Series PM2.5/PM1.0 Particle Sensor Applications * Air Solution Products (Air Purifier, Air Conditioner and etc.) * HVAC Control System * Smart IAQ Device * Outdoor Particle Sensing Device PSMU Series PM2.5/PM1.0 Particle Sensor Product Specifications (Ta=25'C) * Detectable Size: m * Effective Range: 0 ~ 500 g/m3 * Maximum Range: 0 ~ 900g/m3 * Response Time: 1sec * Supply Voltage: DC 5.0V±10% Ripple 30mV or Less * Current Consumption: Typ. 85mA * Output Signal: UART * Operating Temperature: -10 ~ 65'C * Operating Humidity:
TRH-P-201 compact pressure sensor / transmitter 1: It adopts all-stainless steel sealing structure, which has good moisture resistance and excellent media compatibility. 2: Using independent research and development amplifier circuit to greatly improve sensor signal output stability 3: The high reaction speed is adopted, so that the sensor can react to the change of the liquid pressure at any time, and the measurement result is more accurate and error-free. Application: Widely used in pressure measurement and control of industrial equipment, water conservancy, air compressor pressure, pump water valve, constant pressure water supply. Range: 0 ~ 0.1 ~ 20 (MPa) Comprehensive accuracy: ±1%, 0.5%, 0.2% Output signal: 0.5V~4.5V 4~20mA 0~5V 0~10V 1~5V 1~10V Supply voltage: +5V DC, 24VDC (9~36V) Medium temperature: -20 ~ 85 ° C Ambient temperature: normal temperature (-20 ~ 85 ° C) Load resistance: Current output type: maximum 800Ω; voltage output type: greater than 50KΩ Insulation resistance: greater than 2000MΩ (100VDC Sealing level: IP65 Long-term stability: 0.1% FS / year Vibration effect: The output changes less than 0.1% FS within the mechanical vibration frequency of 20Hz~1000Hz. Electrical interface (signal interface): waterproof connector Mechanical connection (threaded interface): 1/2-20UNF, M14�1.5, M20�1.5, M22�1.5, etc. Other threads can be designed according to customer requirements Pressure sensor, pressure transmitter is a high-quality pressure sensor developed by Honghua heng, pressure transmitter Pressure sensor, pressure transmitter price advantage, pressure sensor, pressure transmitter function stable
SO2-AE Sulfur Dioxide Sensor SO2 Sensor Description Alphasense Sulfur Dioxide gas sensors operate using proven fuel cell technology. SO2-AE Sulfur Dioxide Sensor sizes: 20mm diameter, the industry standard size for portable gas detectors The SO2 range provides OEMs with reliable sensors for use in a variety of applications. Strong signal levels combined with low zero current allows resolution below 1ppm and an operating range for safety applications up to 2,000ppm. The sensors are designed for use in both fixed site and portable instrumentation. The SO2 sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification. SO2-AE Sulfur Dioxide Sensor SO2 Sensor Specifications * Range: 2,000ppm limit of performance warranty * Sensitivity: 55 to 80nA/ppm in 400ppm SO2 * Response time t90: < 30s from zero to 400ppm SO2 * Resolution: < 1.5 RMS noise (ppm equivalent) * Temperature range: -30 to 50'C * Pressure range: 80 to 120 kPa * Humidity range:15 to 90 % rh continuous * Weight: < 6 g
CL2-A1 Chlorine Sensor (CL2 Sensor) Description Alphasense Chlorine gas sensors operate using proven fuel cell technology. CL2-A1 Chlorine Sensor size: 20mm diameter, the industry standard size for portable gas detectors The Cl2 range provides OEMs with reliable sensors for use in a number of high volume applications. Strong signal levels combined with low zero current allows resolution to 20ppb and an operating range from +0 to 20ppm. The sensors are suitable for inclusion in fixed installation sensing heads and portable safety instruments. These sensors have improved transient response to humidity changes compared to competitors' equivalent sensors. The Cl2 sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification. CL2-A1 Chlorine Sensor (CL2 Sensor) Specifications * Range: 20 ppm limit of performance warranty * Sensitivity: -350 to -750 nA/ppm in 10ppm Cl2 * Response time t90: < 60s from zero to 10ppm Cl2 * Resolution: < 0.02 RMS noise * Operating life: > 24 months * Temperature range: -20 to 50'C * Pressure range: 80 to 120 kPa * Humidity range: 15 to 90 %rh continuous * Weight: < 6 g
TOCON_B4 UVB+UVC SiC based UV photodetector with integrated amplifier Properties of the TOCON_B4 UV Photodetector * UVB+UVC SiC based UV photodetector in TO5 housing with diffusor * spectral response compliant to CIE087 * 0 - 5 V voltage output * peak wavelength at 280 nm * max. radiation (saturation limit) at peak is 7.5 μW/cm2 * Applications: UVB irradiation measurement TOCON_B4 UV Photodetector Specifications * Typical Responsivity at Peak Wavelength: 670mV/µW/cm2 * Wavelength of max. Spectral Responsivity: 280nm * Responsivity Range: 243 - 303nm * Supply Voltage: 2.5 - 5V * Dark Offset Voltage: 50µV * Temperature Coefficient at Peak: < -0.3%/K * Current Consumption: 150µA * Bandwidth (-3 dB): 15Hz * Risetime (10-90%): 0.182s * Operating Temperature: -25 ~ +85'C * Storage Temperature: -40 ~ +100'C * Soldering Temperature (3s): 300'C
SG01L-5LENS Concentrator lens SiC based UV photodiode Avirtual = 55 mm2 Properties of the SG01L-5LENS UV Photodiode * Broadband UVA+UVB+UVC, PTB reported high chip stability, for flame detection * Radiation sensitive area A = 55 mm2 * TO5 hermetically sealed metal housing with concentrator lens, 1 isolated pin and 1 case pin * 10µW/cm2 peak radiation results a current of approx. 700 nA SG01L-5LENS UV Photodiod Specifications * Typical Responsivity at Peak Wavelength: 0.130/AW * Wavelength of max. Spectral Responsivity: 280nm Responsivity Range: 221 - 358nm * Sensitive Area (chip size = 0.20 mm2): 55mm2 * Dark Current (1V reverse bias): 3.5fA * Capacitance: 250pF * Short Circuit (10µW/cm2 at peak): 700nA * Temperature Coefficient: < 0.1%/K * Operating Temperature: -55 ~ +170'C * Storage Temperature: -55 ~ +170'C * Soldering Temperature (3s): 260'C * Reverse Voltage: 20V
SG01M-B5 UVB-only SiC based UV photodiode A = 0.20 mm2 Properties of the SG01M-B5 UV Photodiode * UVB-only sensitivity, PTB reported high chip stability * Active Area A = 0.20 mm2 * TO5 hermetically sealed metal housing, 1 isolated pin and 1 case pin * 10mW/cm2 peak radiation results a current of approx. 2500 nA SG01M-B5 UV Photodiode Specifications Typical Responsivity at Peak Wavelength: 0.125/AW Wavelength of max. Spectral Responsivity: 280nm Responsivity Range: 231 to 309nm Active Area: 0.20mm2 Dark Current (1V reverse bias): 0.7fA Capacitance: 50pF Short Circuit (10mW/cm2 at peak): 2500nA Temperature Coefficient: < 0.1%/K Operating Temperature: -55 ~ +170'C Storage Temperature: -55 ~ +170'C Soldering Temperature (3s): 260'C Reverse Voltage: 20V
1. GVBL-T12GD UV / Visible Sensor Features TO-46 with quartz glass Indium Gallium Nitride Based Material PN-type Photodiode Photovoltaic Mode Operation High Responsivity & Low Dark Current 2. GVBL-T12GD UV / Visible Sensor Applications UV LED Monitoring (365, 385nm, etc.) Blue LED Monitoring UVA Lamp Monitoring UV Curing 3. GVBL-T12GD UV / Visible Sensor Absolute Maximum Ratings Storage Temperature: -40~90'C Operating Temperature: -30~85'C Reverse Voltage: 5V Forward Current: 1mA Soldering Temperature: 260'C 4. GVBL-T12GD UV / Visible Sensor Characteristics (at 25'C) Dark Current(Max.): 1nA Photo Current(Typ.): 550nA (385nm LED, 1mW/cm2) Responsivity: 0.13A/W Spectral Detection Range: 330~445nm
3SP_NO2_20 C 15x15 NO2 Sensor 20 ppm C Package 110-502 3SP_NO2_20 C Nitrogen Dioxide Sensor NO2 Sensor Description SPEC Sensors' Screen Printed ElectroChemical sensor technology (SPEC Sensor) revolutionizes the current state of the art, enabling new applications in consumer and industrial safety monitoring. SPEC's printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. SPEC's printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size. 3SP_NO2_20 C Nitrogen Dioxide Sensor NO2 Sensor Benefits * Small Size with Low Profile (20 x 20 x 3 mm) * Long Life (10 years expected life) * Fast Response (< 15 seconds) * Low Power Consumption * Individually Calibrated (NIST Traceable) * ROHS Compliant 3SP_NO2_20 C Nitrogen Dioxide Sensor NO2 Sensor Applications * Air Quality Monitoring * Industrial Safety * Air Purification Control
TF-LP01 Laser PM2.5 Sensor Description TF-LP01 type laser particle sensor is a small module for detection of particles in the air with scattering principle. It features compact size, high accuracy, repeatablity and consistency, and strong resistance against interference. It adopts ultra-silent fan, and is able to response in real-time and collect data continuously. The sensors are 100% tested and calibrated in factory. TF-LP01 Laser PM2.5 Sensor Features * High accuracy * Fast response * Compact in size TF-LP01 Laser PM2.5 Sensor Applications * Air purifier, portable air quality detector, smart home, etc. TF-LP01 Laser PM2.5 Sensor Technical index * Distinguishable particle: PM1.0, PM2.5, PM10 * Measurement range: 0~999 ug/m3 * Mass concentration resolution: 1 ug/m3 * Response time:
MB7583 SCXL-MaxSonar-WRLST High Performance Ultrasonic Precision Rangefinder MB7583 SCXL-MaxSonar-WRLST Ultrasonic Sensor Product Description The weather resistant SCXL-MaxSonar-WR self-cleaning sensor is a rugged ultrasonic sensor component module. This outdoor sensor provides very short to long distance detection and ranging in a compact, robust PVC housing. The ultrasonic sensor meets the IP67 water intrusion standard and matches standard electrical 3/4-inch PVC pipe fittings. The MB7583 features a self-cleaning transducer to remove condensation and ice buildup when operating in cold conditions. The sensor accurately applies temperature compensation to every reading, using either the integrated temperature sensor or the optional external temperature sensor (HR-MaxTemp). MB7583 SCXL-MaxSonar-WRLST Ultrasonic Sensor Product Specifications * Resolution of 1-mm * Self-cleaning transducer * 0.57Hz read rate * 42kHz ultrasonic sensor measures distance to objects * RoHS Compliant * Operates from 2.7-5.5V * Low 68mA average current requirement * Maximum range of 10 meters (394 inches) MB7583 SCXL-MaxSonar-WRLST Ultrasonic Sensor Features and Benefits * Factory calibrated beam width * Low operating voltages from 2.7V to 5.5V * All range outputs are active simultaneously * High acoustic sensitivity MB7583 SCXL-MaxSonar-WRLST Ultrasonic Sensor Applications and Uses 8 Autonomous Navigation * Robot Ranging Sensor * Bin Level Measurement * Tank Level Measurement * Grain Level Measurement
Main FeatureS: small DC leakage current measurement Model No.: MEWOI-DRSL(DC)2000mA Name: MEWOI-DRSL(DC)-2000mA Leakage current sensor Diameter: Ï?33mm Rated input Current (IPN)50 100 500 1000 2000 mA(DC) Primary Current Measure range(IP) :0100 0150 0600 01200 02200mA Rated output voltage of secondary side DC ±5V 4-20mA 0-20m Power Supply Voltage ï¼?VCCï¼? DC ±12V15V Current consumption
Min Fetures: DC lekge current mesurement Model No.::MEWOI-DRST-200m(DC) Nme: MEWOI-DRST-200m(DC) Split Core Lekge current sensor Dimeter:Ï?19mm Rted input Current (IPN)102050100200m(DC) Primry Current Mesure rnge(IP)0-±200-±500-±1000-±2000-±300m Rted output voltge of secondry sideDC ±5V, 4-20m, 0-20m (±1%)V Power Supply Voltge (VCC)DC ±12V-±15V (±5%)V Current consumption
Main Features: 1. Measuring scope:AC 0.00A�20KA(50/60Hz) 2. Accuracy:AC 0.01A 3.Clamp mouth: Φ300mm4. LCD display, Data Storage 4.200sets 5.Data upload: RS232 interface 6.Working Time:100hours Model No.: MEWOI9000G Name: MEWOI9000G Flexible Coil Leakage Current Monitoring Recorder/Logger Rated Power: about 5mA at the power-saving mode, maximum current consumption: 20mA Functions: Field-line testing, monitoring, recording AC leakage current and Large current Lead Length:2m
Main Features: 1. Measuring scope:AC 0.00A-6000A(50/60Hz) 2.Accuracy:AC 0.01A 3. Clamp mouth: 200mm 4. LCD display:44mm*27mm, Data Storage:4200sets 5.Data upload: RS232 interface6.Working Time:100hours Model No.:MEWOI9000GB Name: MEWOI9000GB Flexible Coil Leakage Current Monitoring Recorder/Logger Host Dimension :W*L*H75mm*170mm*30mm Time Setting: Recording internal adjustable from 1 to 60 min, If set to 0 min, the auto- store function is turned off Recording Time: Continuously operate for about 100hours at the power-saving mode Line Voltage: Line with a voltage up to AC600V MEWOI9000GB flexible high current clamp / logger is specially designed for field-line testing, monitoring, recording AC leakage current and Large current, It consists of host, flexible current clamps, monitoring software, communication lines and other components. Widely used in electric power, telecommunications, meteorology, railroad, oilfield, construction, measurement, research and teaching departments, industrial and mining enterprises and other fields. Particularly suitable for cable-intensive places, the wall transformer core grounding current test, thick wire cable test, relay protection , frequency conversion, semiconductor switches, electronic power conversion equipment, arc welding and other serious signal distortion current testing industrial environments.
Main Features 1.Small size, low cost 2.High secondary turns 3.Secure locking hinge Model No: MEWOI-CT10,16,24,36,50 Name: MEWOI-CT10,16,24,36,50 Split Core Current Sensor/Transformer Rated Current:5A to 600A loads Rated output:0.333Vac Current Ratio:3000:1 Insulation Voltage:600Vac Maximum Primary Voltage:5000Vac(Insulated Conductor) Operating Temperature:-15 to 60 Frequency Range:50-400Hz Leads:4Foot (105cm), UL 1015, Twisted Pair,0.34mm2(22AWG) Output and leads:can be customized Application 1.Sub-Metering Accurate Measurement 2.Data Loggers to analyze Building & Machinery Performance 3.Digital Fault Recorders 4.Smart Grid Application Features Load Center 5.Three Phase Balance Control 6.In-Factory Display In-Home Display 7.Inverters for Solar & Wind Turbine Systems 8.Power Measurement Device For PLC
Main FeaturesAC/DC Current Sensor Model No.: MEWOI-DRK1D Name: MEWOI-DRK1D-50-500A AC/DC Ï?20mm Open-loop Hall current Sensor Jaw Size21mm Rated input Current IPN50 100 200 300 400 500 A Primary Current Measure range(IP)0~±100 0~±200 0~±400 0~±600 0~±800 0~±800 A Rated output voltage of secondary side2.5±1.25 ±1% V Power Supply Voltage VCCDC +5V ±5% V Current consumptionVCC=+5V 10 mA Galvanic isolation (Vd) 2.5KV /50Hz/1min
GP2Y1010AU0F Compact Optical Dust Sensor Description GP2Y1010AU0F is a dust sensor by optical sensing system. An infrared emitting diode (IRED) and an phototran-sistor are diagonally arranged into this device. It detects the reflected light of dust in air. Especially, it is effective to detect very fine particle like the cigarette smoke. In addition it can distinguish smoke from house dust by pulse pattern of output voltage GP2Y1010AU0F Compact Optical Dust Sensor Features * Compact, thin package (46.0 x 30.0 x 17.6 mm) * Low consumption current (Icc: MAX. 20 mA) * The presence of dust can be detected by the photometry of only one pulse * Enable to distinguish smoke from house dust * Lead-free and RoHS directive compliant GP2Y1010AU0F Compact Optical Dust Sensor Compliance Compliant with RoHS directive (2002/95/EC) GP2Y1010AU0F Compact Optical Dust Sensor Applications * Detecting of dust in the air. * Example: Air purifier, Air conditioner, Air monitor
MB1414 USB-ProxSonar-EZ1 High Performance USB Proximity Detection Sensor MB1414 USB-ProxSonar-EZ1 Ultrasonic Proximity Sensor Product Description The USB-ProxSonar-EZ1 has a detection zone of ~5 feet and will allow for 8+ simultaneous sensors. The USB-ProxSonar-EZ ultrasonic proximity sensors feature an easy to use USB interface that connects directly to a computer with a standard Micro-B USB cable. The USB-ProxSonar-EZ sensors detect objects in a calibrated detection zone and report when an object (such as a person) enters the detection zone. The target is released after leaving the USB-ProxSonar-EZ detection zone. MB1414 USB-ProxSonar-EZ1 Ultrasonic Proximity Sensor Product Specifications * USB interface * ~2.5 second target acquire time * ~1.5 second target release time * Automatic multi-sensor operation * People sensor * Resolution of 1 inch * Maximum Range of 125 inches (318 cm) * Detection zone range of 60 inches (152 cm) * 42kHz Ultrasonic sensor measures distance to objects * RoHS compliant * Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches * Small, light weight module * Designed for easy integration into your project or product * Longest range detection zone
