o3 gas sensor is widely used in water disinfection, food processing and purification, food storage and preservation, medical and health, and household disinfection and purification.
In ozone applications, a certain concentration of ozone is an important parameter to ensure disinfection, energy conservation and pollution prevention.
But as If the concentration of ozone in the environment is too high, it will cause harm to the human body. Therefore, it is very necessary to effectively monitor the concentration of ozone.
The transmitter uses electrochemical technology to measure O3 concentration, and the reaction is quick and sensitive, which can reliably detect ozone concentration.
degree. o3 gas sensor product uses 485 communication, standard ModBus-RTU communication protocol, communication address and baud rate can be set, the farthest pass
The letter distance is 2000 meters. The equipment is 10-30V wide-voltage power supply, and the enclosure has a high degree of protection, which can adapt to various harsh conditions on site.
Industrial CH4 Methane Gas Detector is a safety device, widely used in Mine, factory, gas station, Chemistry company, ect. It can call gas detector, gas alarm, it is a device to sensing CH4, C2H6, C4H10, C5H12, H2S, ect combustible gases.
Details:
* Technical Parameter:
* Environmental Parameters:
Environmental temperature: -40 degrees Celsius ~ 70 degrees Celsius
Relative humidity: Less than 90%R.H
* Technical Parameter:
Operating Voltage: 16~30V DC
Operating Current: 120mA
Output signal: 4~20mA standard signal three-wire system output
* Sensor: Die cast aluminum catalysis incendiary sensors
* Respond: Less than 30s
* Measuring range: 0~100%LEL
* Installation Parameter:
Installation type: Wall-mounted
Transmission cable: Three conductor cable shielded cabling, section: 3x1.5mm2, external diameter: 10mm
Transmission Distance: â?¤1000m
* Explosive-proof grade: Exd II CT6
* Protection Grade: IP65
* Connector: G3/4
If you interest in gas leakage detector, flammable gas sensor, please contact us. All business inquires are replied within 24 hours. Welcome to order by OEM and ODM! ( Skype: joyyiliu315 )
Type: Optical level sensor
Input voltage: DC5V~28V
Output signal: TTL
Size: M16x1.5
IP grade: IP68
Accuracy: ±1 mm
Life time:50,000 h
Material: PSU & Stainless steel
Cable and connector:Customized
No mechanical moving components and with high reliability;
Strong corrosion resistance;
High liquid level control precision and can be installed from any direction;
The sensor itself satisfies RoHS requirements;
Product Parameter:
Type: Optical Level Sensor
Power supply: 5V DC
Material: PC or PSU
Size: 1.46*1.46*2.57
Operating Temperature: -20~ +65 °C
Storage Temperature: -40~ +85 °C
Working Life: 50000 Hrs
Products Features:
1. No mechanical moving components and with high reliability.
2. Small in size and low in cost.
3. High liquid level control precision and can be installed from any direction
4. Satisfying the requirements in Safety Standards.
5. The sensor itself satisfies RoHS requirements.
6. Waterproofing standard IP67.
7. Accuracy is between ±1mm.
Application:
Water dispenser
Water heater
Humidifier
Medical devices or equipment
Electrical appliances and equipments etc. requiring liquid-level control
This "Solar Sensor Wall Light" has an intelligent energy saving mode which charges the solar light under both strong sunlight and dim sunlight. This is best suited for lighting up dark or sensitive areas around the house. This solar light is made of high-quality PVC plastic which makes it durable against sunshine, rain, snow, ice, and wind. This solar light is waterproof and heatproof. These solar light can be placed in your garden, yard, aisle or driveway. This lantern emits a white bright light. It's lightweight and portability makes it perfect for your camping and trekking. The built-in solar panel charges the battery to provide 8-10 hours of light. The solar panel needs only 6-8 hours of charging for a full charge.
The installation of this solar light is easy and requires no extra equipment. You just need to screw it to hold it against any surface or wall.
This "Solar Sensor Wall Light" is equipped with Day/Light sensor, When there is Sunlight available the solar light will charge itself and when it becomes dark, the solar light turns itself On and provide a bright white light of 20 LED lights.
Besides the solar sensor, this solar light has motion sensor inside it which runs on infrared. When you move away from the solar light it will automatically shut down and when you go near to the solar light, it will automatically turn on.
SKU YN2092
Weight 150 Grams
Height 12 cm
Width 5 cm
Length 9 cm
Watt 5 Watts
Material Plastic
In Pack 1 Solar Sensor Wall Light
Body / Housing: DKP Sheet Metal Body
Sensor Type : Motion
Light Source : SMD LED
Color Temperature : 3000 K / 4000 K / 6500 K
CRI >80
IP Value : IP 20
Installation: Surface Mounted
POWER: 18W
LUMINOUS FLUX(lm) : 2.000
COLOR TEMPERATURE (K) : 3.000/ 4.000 / 6.500
DIMENSIONS : 290*290*50,5 mm
BEAM ANGLE : 360
DETECTION RANGE : 9 m
INSTALL HEIGHT : 2.8 m
SENSOR ON/OFF TIME OPTIONS: 5 Sec- 5 Min
Body / Housing: DKP Sheet Metal Body
Sensor Type : Motion
Light Source : SMD LED
Color Temperature : 3000 K / 4000 K / 6500 K
CRI >80
IP Value : IP 20
Installation: Surface Mounted
POWER: 18W
LUMINOUS FLUX(lm) : 2.000
COLOR TEMPERATURE (K) : 3.000/ 4.000 / 6.500
DIMENSIONS : 290*290*50,5 mm
BEAM ANGLE : 360°
DETECTION RANGE : 9 m
INSTALL HEIGHT : 2.8 m
SENSOR ON/OFF TIME OPTIONS: 5 Sec- 5 Min
Body / Housing: DKP Sheet Metal Body Sensor Type : Motion Light Source : SMD LED Color Temperature : 3000 K / 4000 K / 6500 K CRI >80 IP Value : IP 20 Installation: Surface Mounted POWER: 18W LUMINOUS FLUX(lm) : 2.000 DIMENSIONS : 290*290*50,5 mm BEAM ANGLE : 360° DETECTION RANGE : 9 m INSTALL HEIGHT : 2.8 m SENSOR ON/OFF TIME OPTIONS: 5 Sec- 5 Min .Emergency Light Time : 3 Hours
Body / Housing: DKP Sheet Metal Body . Optic: Glass / Polycarbonate /Opal Diffuser . Sensor Type : Motion. Light Source : E27 .IP Value : IP 20. Installation: Surface Mounted DIMENSIONS : 290*290*90,8 mm .BEAM ANGLE : 360° .DETECTION RANGE : 9 m. INSTALL HEIGHT : 2.8 m. SENSOR ON/OFF TIME OPTIONS: 5 Sec- 5 Min. Emergency Time : 3 Hours
Body / Housing: DKP Sheet Metal Body .Sensor Type : Motion Light Source : E27 (25W*2 Max.) IP Value : IP 20 Installation: Surface Mounted DIMENSIONS : 290*290*90,8 mm BEAM ANGLE : 360° DETECTION RANGE : 9 m INSTALL HEIGHT : 2.8 m SENSOR ON/OFF TIME OPTIONS: 5 Sec- 5 Min
SOJI ELECTRONICS delivers "Advanced Fuel Management Solutions" and is the premium brand for capacitive fuel level sensor with outstanding features: high accuracy (up to 99.5%), wide operation temperature, flexible length, exact algorithm, smart software and easy installation.
8 channel 1080P Full HD HDD mobile DVR;
H.264 high profile.Industrial good vibration absorber and heat-dissipated level design.
Set all menu via WIFI with Ipad/Iphone/Android and PC.
Mirror function set on the MDVR menu directly.
Connect acceleration sensor, temperature sensor, oil/fuel sensor.Control panel, LED panel ,Counter camera,
Oxygen sensor and other peripherals through RS232/RS485 interface.
With aviation connector, stable and reliable;
Special interface for HDD vehicle Mobile DVR, convenient for transportation and installation.
Support speed, turn, brake, reversing, door opening and closing.
Support 8-CH 1080P/720P/960H/D1/HD1/CIF; 4CH audio& video.
Support G-sensor,Geo-fence,GPS, 3G/4G, WIFI(more fast and stable) for optional.
Support Vehicle PTZ local and remote control, Support USB interface, support firebox as mirror backup.
Support max 2.5 inch 2TB HDD/SSD and 1 SD card dual storage.
DC8V~36V wide voltage supply,aluminum housing,low power consumption.
Power off can work 8 seconds and 1~2 hour with UPS battery.
G sensor dvr recorder Product size:199x76x190mm.
