Product Parameter: Type: Optical Level Sensor Power supply: 5V DC Material: PC or PSU Size: 1.46*1.46*2.57 Operating Temperature: -20~ +65 °C Storage Temperature: -40~ +85 °C Working Life: 50000 Hrs Products Features: 1. No mechanical moving components and with high reliability. 2. Small in size and low in cost. 3. High liquid level control precision and can be installed from any direction 4. Satisfying the requirements in Safety Standards. 5. The sensor itself satisfies RoHS requirements. 6. Waterproofing standard IP67. 7. Accuracy is between ±1mm. Application: Water dispenser Water heater Humidifier Medical devices or equipment Electrical appliances and equipments etc. requiring liquid-level control
Type: Optical level sensor Input voltage: DC5V~28V Output signal: TTL Size: M16x1.5 IP grade: IP68 Accuracy: ±1 mm Life time:50,000 h Material: PSU & Stainless steel Cable and connector:Customized No mechanical moving components and with high reliability; Strong corrosion resistance; High liquid level control precision and can be installed from any direction; The sensor itself satisfies RoHS requirements;
Working Principle: when the host tilts or falls, the ball inside the anti-dump switch is tilted and displaced along with the housing under the action of gravity. The tablet is restored to its original position due to the detachment of the ball, and the switch is instantly disconnected, thereby reach the purpose of cutting off the power or circuit. Rating voltage: DC5V Output signal: High or low voltage Size: Φ15.5 Title angle: 30±5° Reset angle: 70±5° Response angle: 360° Life time: 50,000h Installation: Horizontal Material: PC Application: electric heaters; oil heaters; electrical fans; electrical irons; air conditions; air purifiers; physiotherapy equipment; sports equipment; other electrical appliances and equipment that need anti-fall protection.
Type: Hall Flow Sensor Flow rate: 0.1~0.75L/min Materila: PC Input Voltage: DC 5V-20V Angle: 0°, 90°, 180°, 270° Accuracy: 1%, 3%, 5% Signal: pulse
We Can Supply Freestyle Libre 2 Flash Glucose Monitoring System Sensor Please Dont Hesitate to Contact Us in Case of Any Interested
Item Name: Water Level Sensor Float Switch Item No: CFS-103L Color: black Cable Length: 350mm / 13.78inch Switch Size: OD17 x 85mm Thread Dia(Approx) : M16*1.5 Max Contact Rating: 10W Float Body Material: polypropylene Float Ball Material: polypropylene Working Voltage: AC110V-220V Working Temperature: -10~85 Max Temperature: 85 Working Pressure: 0.4 Mpa Max Pressure: 0.4Mpa Max Switching Current: 0.5A Max Breakdown Voltage : 220VDC Max Carry Current : 1.0A Max Contact Resistance: 100m Ohm Max Carry Current : 1.0A
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Item Name: Liquid water level sensor float switch Model: CFS -1040P Color: white Cable Length: 350mm / 13.78 Switch Body Size: OD19 x 16.6mm Thread Dia (Approx): M8*1.25 Max Contact Rating: 10W Float Body Material: PP Float Ball Material: PP Working Voltage: AC 110V-220V Working Temperature: -10~+85 Max Temperature: 85 Working Pressure: 0.4Mpa Max Pressure: 0.4Mpa Max Switching Current: 0.5A Max Breakdown Voltage: 220VDC Max Carry Current: 1.0A Max Contact Resistance: 100mOhm Max Carry Current: 1.0A
APPLICATION This kind of level sensor float switch is designed for the Ink cartridge of advertising printing machine, oil cartridge, ink box, etc. It also can be using to any other container to monitoring the liquid level. HOW IT WORK This liquid level sensor float switch can be easily converted the up or down position monitoring by inverting the float after unload the E-ring. EASY TO USE, HIGHT RELIABLILITY This kind of float switch is simple and reliable, easy to install and use strong anti-interference with high reliability. LONG SERVICE LIFE DC24V AC 110V circuit can be used, electrical lifespan: 1 million times. OUR SERVICE We offer standard product and custom design service over liquid level sensor with different materials & different sizes, send me message for further support if you need customized product. PRODUCT SPECIFICATION: Item Name: Water level sensor float switch Color: Level Sensor Body Stainless Steel Color Cable Length: 350mm / 13.78 Switch Body Size: OD28 x 28mm Thread Dia (Approx): M10*1.0mm Max Contact Rating: 10W Float Body Material: Polypropylene Float Ball Material: SUS 304 Stainless Steel Wire Material: Fiberglass pipe Working Voltage: DV24 - AV 110V Working Temperature: -10~+85 Max Temperature: 85 Working Pressure: 0.4Mpa Max Pressure: 0.4Mpa Max Switching Current: 0.5A Max Carry Current: 0.5A Max Contact Resistance: 100mOhm Max Carry Current: 0.5A PACKAGE INFORMATION: Package Weight: 7.34 ounces Packing list: 6 x Liquid level sensor Float Switch Unit Weight: 0.8 ounce Package Size: 15x8.5x10.5cm / 5.8x3.3x4inch WHAT WE CAN DO We are professional manufacturer of the level sensor float switch, and we offer standard product and custom design service over all kinds of float switch level switch, temperature switches, flow switches, magnetic switches, reed switches, liquid level, pressure and flow sensor, welcome to send us inquiry for suggestion or support any time.
