Current Sensor 4-20Ma Output

Input: DC 10mV-1000V; Output: DC 4-20mA; Accuracy: 0.2%; Power supply: DC 9-36V.

Input: AC/DC 20-100A; Output: DC 4-20mA; Accuracy: 1.0%; Power supply: DC 12V, 15V, 24V.

Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass

Input: AC 0.5A-5A; Output: DC 0-5V; Accuracy: 0.2%; Power supply: DC 9-36V.

Supplier: Wired magnetic door sensors.

Attribute: 1.Input: DC 0~1mA...0~5A; 2.Output: DC(0)4-20mA 3.Accuracy : 0.5% 4.Input Impedance (R): Riï¼?0.05V/Ix (Ix is the current be measured) 5.Linear Range:0-120% of nominal input 6.Responding Time: 150ms 7.Over Load Capacity: 10 times of nominal input, for 5 seconds; 8.Maximum Load: 6V 9.Static current: 17mA 10.Auxiliary Power:+12Vdc +24Vdc 11.Isolation Voltage: â?¥2500Vdc, for 1 minute 12.Output Ripple: ï¼?10mV 13. Drifting by Temperature: 350Ã?10-6/ 14. Ambient Temperature: -10ï½?+50 15. Mounting : DIN Rail 35mm Mounting

1.Features: firm structure. low power consumption. small size. easy installation. vibration resistance. water vapor proof and dust proof 2.Application: It  applies hall effect principle, can measure direct current, alternating current, pulse and current of various irregular wave forms in electrical isolation conditions. 3.Specification: Measuring frequency: 0-100KHz Accuracy: 0.2%-1% Responding time:

Model HQ15-A5 HQ15-A100 Rated primary current 5A AC 100A AC Output Voltage 10 mV AC/A 1mV AC/A Maximum input current 50A AC (Continuous) 130A AC (Continuous) (45-66Hz,Ambient temp.50C) Amplitude accuracy ±0.3%RD ±0.02%FS (10%-100%I1n),(45Hz- 66Hz) Phase accuracy ±2 (10%-100%I1n)(45Hz-5kHZ) The amplitude frequency characteristic ±0.1% (45Hz-5kHZ)(Deviation accuracy) Conductor impact ±0.5 (Off-center) The influence of external lectromagnetic fields 0.1A (In AC 400A / m electromagnetic fields) Temperature coefficient ±0.02%/C of the reading data Dielectric strength 3000 V AC rms/Continue 15 seconds(Circuits-iron core, iron core-shell) The maximum rated voltage 300V AC rms Applicable standards Safety: EN61010-2-032:2002,300V CAT III, Contamination II EMC: EN61326:1997+A1:1998+A2:2001+A3:2003(Class A) Mechanical parameters Measurable conductor diameter Max.15mm Cable length About 3m Dimension (W x H x D) About 46135 21 (Excluding protruding parts) Weight About 230g Environmental conditions Operating temperature 0 to 50 C (32-122 F) Operating humidity 80%RH(No condensate) Storage temperature -10 to 60 C (14-140F) Storage humidity 80%RH(No condensate) Operating environment Indoor, altitude up to 2000 meters