PT1XX Series : PT111 Series, PT123 Series, PT124 Series, PT127 Series, PT131 Series.
High Temperature Melt Pressure Transducer (Melt Pressure Sensor)
High Temperature Melt Pressure Transmitter
Product Description
Product Introduction
PT1xx6B Series High Temperature Melt Pressure Transmitter. The main applications are under the high temperature melt, fluid, gas pressure measurement and control fields in petroleum chemical industry, chemical
fiber textile machinery, non-woven fabric, nonwoven, plastic, rubber, extrusion equipment, etc. With high accuracy, good stability, output signal big, dynamic of good, strong commonality, etc.
Usage: Pressure Sensor, Direct spo2 sensor connected to the monitor, no need for extension cable.
Compatible Mode: AS/3, CS/3, CH/S, CH/2S, CH-RS, CG/2S, Cardicap I, Cardicap II, Cardicap 5, Capnomac Ultima, Light Monitor: M-Estpr, Oscar II, OSP-200, Satlite Trans, SatliteTrans Plus, System 5ULTS00, ULTSIO, ULTSVI, ULTSVO
Usage: Pressure Sensor, Direct spo2 sensor connected to the monitor, no need for extension cable.
Compatible Mode: Nellcor N100, N180, N200, N-20, NPB-50, NPB-75, NPB-290, NPB-295, N-390, N-395, N-3000, N-6000
Main Features:
Auto reset after alarm
MCU process
Sensor with high stability and low power consumption
Detecting natural gas and LPG
SMT adopted
Technical specification:
Operating voltage: AC 220V or DC 9-16V
Standby current: less than 90mA or less than 30mA (low power consumption)
Alarm current: less than 100mA or less than 40mA (low power consumption)
Rated power: less than 3W (AC 220V)
Operating temp.: -10 to +50 degrees
Working humidity: less than 95%RH
Alarm mode: network output / sound & flash alarm / RF
Alarm volume: more than 85dB/m
Alarm density: 10%LEL
Alarm output: relay output (N.C.and N.O. optional) / RF signal
Dimension: 70L*40W*110Hmm
Quick Details
Type:Percussion Hammer
Brand Name:BATERSUARG
Place of Origin:Beijing, China (Mainland)
Instrument classification:Class I
Product Name:Canine OvulatIon Detector
Certificate:CE ISO
Color:Yellow
Function:Diagnose
Application:ovulation detector
Supply Ability:10000 Unit/Units per Week
Packaging & Delivery
Packaging Details
Carton Packaging
Port
Shanghai,Tianjin port
Lead Time :
Quantity(Units) 1 - 1000 >1000
Est. Time(days) 5 To be negotiated
Product Description
Application
Accurately master the best breeding time
Test Method
Fully automatic one-time test
Test Speed
Within 3 seconds
Net Weight
300 g
Electric Power
a 9 volt battery
Display
LCD screen, about 2.6 inches
Measuring range
10-1990
Working temperature
0-50°c
Maximum humidity
85%
product description:
The automatic dog estrus ovulation tester consists of three parts: a measuring probe, a digital display for reading data, and a handle with a standard 9 volt battery.
The switch is located on the back of the handle.
There are two parallel (parallel) electrodes at the top of the probe for measuring the resistance of the vaginal mucus.
The current generated by the two electrodes and the electric field generated by this trace current are harmless to animals and humans.
The ovulation tester is made of polyethylene with good chemical stability and insulation. The entire instrument is water resistant so it can be cleaned to keep the instrument clean and maintain.
Details:
1.Connectors: 8 pin
2.Direct spo2 sensor connected to the monitor, no need for extension cable.
3. Compatible models: 25C, C1, C3, M3, M5, MP20, MP30, MP50, MP70, MP80, VM5, VM6, VM8 (Philips tech)
Delivery Time: 3-5 days
Shipping: DHL/FedEx/EMS/UPS/TNT
Packing: 1pcs pack into one PU bag, then pack inside a small carton box
Types of Patient Finger For Your Choice:
1. Adult finger clip
2. Adult silicone soft tip
3. Pediatric finger clip
4. Pediatric silicone soft tip
5. Infant silicone soft tip
6. Neonate silicone wrap
6. Neonate "Y" type
7. Adult ear clip
Our Advantages:
1. Factory price is more competitive.
2. Fast delivery(3-5 days, we are a manufacturer, have enough products in stock.)
3. All products are made of medical material with very good quality(OE, ISO, ect. certificates)
4. Samples available(accept trail order)
5. One piece MOQ is acceptable.
6. OEM & ODM service
7. Adult/infant/pediatric/neonatal patient finger types are available
FAQ
1. Are you a trading company or a manufacturer with your own factory?
We are a professional manufacturer with our own R&D team.
2. Can I have my own Logo on the product?
Yes, your own drawing is welcomed. We can design and make your logo on the product, but the cost need to be paid by your side.
3. Can we visit your factory?
Of course. Welcome to visit our factory. Our professional technicians are willing to show you more details of our products.
4.Does your company have any certificates?
Yes, we are certified with CE and ISO13485. Its our duty to offer you high quality products with best service and the most competitive price.
5. When can you deliver products?
It depends on the quantity. Most of our products are in stock. For common orders, we can arrange shipment immediately after we get your payment.
Main Products We Supply:
Reusable Spo2 Sensor
Disposable Spo2 Sensor
Spo2 Extension Cable
ECG Cable with leadwires
EKG Cable with leadwires, EKG /ECG Trunk Cable
Temperature Probe
Fetal Transducer
ECG Electrode
EEG Cable
IBP Cable and Transducer
NIBP Cuff and hose
ETO-A1 Ethylene Oxide Sensor ETO Sensor Description
Alphasense is expanding its line of Electrochemical Toxic Gas Sensors to address industry-specific requirements, including emissions monitoring, process safety, environmental monitoring and VOCs.
Ethylene Oxide (C2H4O)
The ETO is a general purpose sensor, primarily developed for monitoring Ethylene Oxide but also capable of measuring other volatile organic compounds (VOCs). Our toxic evaluation board allows easy adjustment of the bias voltage to optimise this sensor for the required application.
See application note AAN113.
Available in A and B series
ETO-A1 Ethylene Oxide Sensor ETO Sensor Specifications
* Range: 100 ppm EtO limit of performance warranty
* Sensitivity: 2000 to 3200 nA/ppm in 20ppm EtO
* Response time t90: < 150s from zero to 20ppm EtO
* Resolution: < 0.1 RMS noise (ppm equivalent)
* Temperature range: -30 to 50 deg C
* Pressure range: 80 to 120kPa
* Humidity range: 15 to 90% rh continuous
* Weight: < 6 g
H2-BF Hydrogen Sensor H2 Sensor Description
Alphasense is expanding its line of electrochemical Toxic Gas Sensors to address industry-specific requirements, including emissions monitoring, process safety, environmental monitoring and VOCs.
Hydrogen (H2)
The Hydrogen sensor has excellent ppm sensitivity for low concentrations to 2,000ppm H2. The very low sensitivity to CO makes this one of the most selective Hydrogen sensors on the market.
As with all Hydrogen sensors, temperature compensation for sensitivity must be applied carefully.
Available in A series.
H2-BF Hydrogen Sensor H2 Sens or Specifications
* Range: 5,000 ppm H2 limit of performance warranty
* Sensitivity: 10 to 25 nA/ppm in 400ppm H2
* Response time t90: < 55s from zero to 400ppm H2
* Resolution: < 0.8 RMS noise (ppm equivalent)
* Temperature range: -30 to 50 deg C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh
* Weight: < 13g
The P235 remote particle counter measures 0.5 µm and 5.0 µm with a flow rate of 0.1 CFM (2.83 LPM). Integration is easy into a real-time monitoring or building management system via Modbus RTU or Modbus ASCII. The P235 is the smallest remote particle counter in the market and has easy mounting options. The P235 complies with ISO 21501-4 and includes a 2 year limited warranty.
P235 Remote Particle Counter Features & Benefits
* Measures 0.5 µm and 5.0 µm
* 0.1 CFM (2.83 LPM) flow rate
* Measures 2 channels of simultaneous data
* Long life laser diode
* Modbus RTU or Modbus ASCII outputs
* Concentration limit of 2,000,000 per ft3
* Complies with ISO 21501-4 and JIS B9921 standards
* Lightweight stainless steel enclosure
* Easy to clean and wipe down
* 2 year limited warranty
Measure the electromagnetic field radiation intensity that is produced from welding equipment, microwave oven leakage, and other environmental safety concerns
The Microwave Meter is calibrated precisely on the frequency value 2.45 GHZ (microwave oven). Features maximum and minimum hold, an audible alarm, and a zero adjustment to eliminate background EMF. The display also indicates overload and low battery. Comes with a soft carrying case and standard 9V battery, which provides approximately 100 hours of use.
Dim: 5" x 2" x 1¼" (127 x 51 x 32 mm).
Weight: 5.4 oz (153 g).
840046 RF Microwave Meter Sp ecifications
* Display: 3¾ digits, maximum reading 3999
* RF Power Density: 0.003 to 2.700 mW / cm2
* RF Frequency: 50 MHz to 3.5 GHz
* Microwave Frequency: 2450 MHz
* Resolution: 0.001 mW / cm2
* Accuracy: ±2 dB at 2.45 GHz ±50 MHz
* Operating Temperature: 41 to 104 deg F (5 to 40 deg C)
* Operating RH:
This STM85 microcontroller based control card can be used to switch ON & OFF 17relays via serial communication (RS232 or UART TTL) .It can also read the status of 8-digit inputs .The relay output status & digital input status is continuously sent out as RS232 data string .It operates in 9600BPS,8-N-1 mode .This control card can be controlled via weighing scale PCB or via PC.
CO/H2S-D2 Miniature Size Carbon Monoxide + Hydrogen Sulfide Sensor Introduction
The world wide use of multigas, portable, personal safety monitors has grown since the 1970s to include an ever increasing number of industries. The one requirement in common to the majority of these instruments is the need to measure both Carbon Monoxide and Hydrogen Sulfide simultaneously.
Alphasense now offers a compact, dual gas sensor which allows designers to reduce significantly instrument size and cost. The D2 sensor provides a unique approach to the dual gas sensor in both its size and working electrode configuration. The use of a high capacity filter over the Carbon Monoxide working electrode eliminates Hydrogen Sulfide cross sensitivity to Carbon Monoxide.
Proven in the field over many years, these sensors perform well even under long term, challenging conditions.
* Range: 1000 ppm CO limit of performance warranty
* Range: 100 ppm H2S limit of performance warranty
* Sensitivity: 27 to 55 nA/ppm in 400ppm CO
* Sensitivity: 90 to 160 nA/ppm in 20ppm H2S
* Response time t90: < 25 (s) from zero to 400ppm CO
* Response time t90: < 30 (s) from zero to 20ppm H2S @ 20 deg C
* Temperature range: -30 to 50 deg C
* Humidity range: 15 to 90 %rh continuous
* Pressure range: 80 to 120kPa
CM8 Carbon Monoxide Sensor Features:
1. More than ten years long life, electrochemical principle
2. Low sensitivity to ethanol;
3. Can reduce the influence of various interference gases, good linear output characteristics;
4. Consistency is very good;
5. The carbon monoxide gas selectivity and repeatability is very good;
6. The sensor signal output and the concentration of carbon monoxide gas into a linear relationship;
7. The leading production technology and new advanced materials;
8. Electrolyte pollution, materials comply with RoHS requirements;
9. Strong anti-interference;
10. The shell thicker will never rust, the new material used in component feet is conductive.
