Electric Pumps Suppliers and Manufacturers

The product has own advantage not only carry is convenient,durable,labor-saving,but also have been acquired ZBY 89001-88 international standard. It's used to all kinds of charge,such as bike,motorbike,car tyre,buoy,air bed,ball series etc.

Flow: 15m3/h Head: 7m Power: 0.75kw Material: cast iron Outlet dia: 65mm Speed: 2900r/min Voltage: 380V Phase: 3 phase/50Hz Color: Yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries

Plunger Type Pumps, Hydraulically Actuated Diaphragm Type Pumps, Mechanically Actuated Diaphragm Type Pumps, Solenoid, Operated Diaphragm Dosing Pumps, Complete Skid Mounted Dosing Systems, Chemical Process Pumps, Seal free Magnetic Drive Pumps, Progressive Pumps, Y Type Strainers, Pulsation dampners, etc.

Flow: 15m3/h Head: 65m Power: 5kw Material: cast iron Medium: clean water Outlet dia: 50mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. .

Flow: 20m3/h Head: 54m Power: 5.5kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.

The main series of our product are: BQS mining explosion-proof submersible electric pump, WQ sewage/mud/sand submersible pump, QJ deep well submersible electric pump, QS small submersible electric pump and WQX high head submersible electric pump. Among these products, the max. of power is 410KW, the max. of flow is 600M³/h and the max. of head is 800M.

Hydraulic Oil Pump Rated pressure:10000psi Flow rate at 1500rpm:0.64L/min Inlet port:1/2 FNPT Outlet port: 1/4FNPT This pump is a plunger pump, it needs to be driven by a motor and recommend using electric motor. It requires very little power, so solar energy can be used as an energy source for its motor. These pumps are used on wellhead control panel systems, Power packs on high-torque service tools. The pump application medium is hydraulic oil and it needs to be installed at a lower position than the tank. Before staring the pump, you must vent the air in the pump chamber.

Electric fuel pump Cross reference Bosch: 0580314068 0580453081 0580310006 0580310007 0580453041 0580453046 0580453054 0580453058 0580453060 0580453071 0580453081 Vw: 8a0 906 091g/a Vdo: 405.052.3.1, 405-052-003-002z Pierburg: 7.18259.50.0 Airtex: E8256 Carter: P74138 Vw/audi: 8a0 906 091 a, 8a0 906 091 g Mapco: 22885 Oe: 400 906 091 400 906 091c 405 052 002 001z Application Ford Falcon ea, eb, ed 87-93 Audi a6 (4a, c4)1.8 12.95-02.97 1.78l (4a, c4)1.8 quattro 12.95-02.97 1.78l (4a, c4)2.0 06.94-02.97 1.98l (4a, c4)2.6 06.94-02.97 2.6l Audi Coupe(89, 8b) 11.88-12.96 2.0l 2.2l/2.3l/2.6l/2.8l V8 10.88-02.94 3.6l /4.2l Pressure 4bar Flow 110l/h

Electric fuel pump Cross referencetoyota: 23221-16490 Pierburg: 7.21088.02.0, 7.21088.05.0, 7.21088.06.0 7.21088.52.0, 7.21088.62.0, 7.00240.00.0 applicationtoyota Camry 95-00 2.2l /3.0l Carinae 92-97 1.6l /2.0l Celica 1993 1.8l /2.0l Corolla 93-97 1.6l /1.8l Paseo 1992 1.5l Rav.4 96-00 2.0l Tacoma 95-01 2.5l /2.7l 4.Runner 92-94 2.4l /2.7l/3.0l

Flow: 7m3/h Head: 15m Power: 0.75kw Material: cast iron Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries

Please contact us for more information

Casting Pump Cover For Electricity Pump Product Specifications     Sand Casting:20-5000kgs/PCS Stainless steel casting parts Precision Casting:5g-20kgs/PCS Steel Pressure Up to 2500LBS Alloy Steel Castings Stainless Steel Castings Carbon Steel Castings The company adopts ASTM, GB and other advanced manufacturing standards at home and abroad to carry out the process design and manufacture of castings. At present, the annual production capacity can reach 6,000 tons, the maximum manufacturing weight of a single casting is 5 tons, the pressure grade is 150LB to 2500LB, We has passed and strictly implemented the ISO9001:2008 quality management system.  Steel Casting Pump Body is widely used in wind power, nuclear power, hydropower, gas turbines and other energy machinery equipment; engineering machinery, large mechanical equipment and other transmission machinery; offshore platforms and other marine and offshore industries; petrochemical - pressure vessel equipment and aerospace.

Application: For high viscosity grease injection. Suitable for all kinds of power machine grease injection. Apply for injection 0-3#grease of engineering machine. Power supply: AC220V/24V/12V. Barrel capacity: 20-30L Output capacity: 0.6L/Min Output pressure:

Here's what you can learn about high pressure pumps:HNSP Series Super High Pressure Electrical PumplSingle-Acting,high performance,stable.Used to drive the bolt tensioner,suitable for marine and wind-power industry.High accuracy quare.Easy to adjust the pressure from 700 to 3000bar.Easy to operate with card set coupler.Light weight,easy to carry. Find out the details of what to look for when choosing the UHP pump and torque wrench to use. Learn more about hydraulic wrenches and the design that best suits you. The design you choose will have a significant

Technical: Suitable for 180-220L drums Max. Delivery: 12L/min Features: Force feed high volume pumps Extreme viscous grease Reduce waste Clean and convenient method of drum change Our pumps take on the toughest challenges from transferring lighter fluids(oils, solvents and adhensives)to moving medium-viscosity materials(RTV silicone, greases, coatings, plastisols and offset inks) to pumping very heavy viscosity materials(ink flushes, epoxies and mastics). Positive-priming force on the material: Downward force of the follower forces material into the pump inlet, assuring positive priming of high-viscosity materials Follower Has an elastomer seal: Twin blade wiper seals against the material container's sides, preventing drying and contamination of the material and wipes the container's sides clean Four-way air valve control: This directional valve controls Up/down movement of the follower. Primer unit remains coupled to the air system at all times(use of an air regulator and gauge is recommended).

Application: For high viscosity grease injection. Suitable for all kinds of power machine grease injection. Apply for injection 0-3#grease of engineering machine. Power supply: AC220V/24V/12V. Barrel capacity: 20-30L Output capacity: 0.6L/Min Output pressure:

Flow: 7m3/h Head: 18m Power: 1.1kw Material: cast iron Outlet dia: 40mm Speed: 2900r/min Voltage: 380V Phase: 3 phase/50Hz Color: Yellow Product overview: The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site. Usage: Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium. Conditions of using: 1.The medium temperature should not be over 40oC ,PH:4-10. 2.The solid volume ratio of the medium should not be over 2%. 3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s. 4.The density of the medium is 1.2*10 3kg/m3. 5.Centered on the impeller,underwater not more than 5m. Scope of application: 1. For discharging polluted waste water of factories and industries; 2. sewage discharge station of living quarters; 3. drainage system of municipal sewage treatment plant 4. drainage station of fire fighting system 5. waterworks equipment of running water factory 6. sewage discharge of hospitals and hotels 7. construction site of municipal engineering 8. matched equipment of exploration mine 9. country biogas digester 10.farm irrigation 11. other industries

Application: For high viscosity grease injection. Suitable for all kinds of power machine grease injection. Apply for injection 0-3#grease of engineering machine. Power supply: AC220V/110VAC/24VDC Barrel capacity: 40KG Output capacity: 0.4L/Min Output pressure: