Main Feature: 1.Small size, low cost 2.High secondary turns 3.Secure locking hinge Model No.: MEWOI-CT23CT55CT58,CT88,CT410,CT610,CT816 Name: MEWOI-CT23CT55CT58,CT88,CT410,CT610,CT816 Split Core Current Sensor/Transformer SPECIFICATION Model Number: MEWOI-CT23CT55CT58,CT88,CT410,CT610,CT812,CT816 Apply to: GB28040 and IEC68169 Rated Voltage : 0.66/0.72KVrms Primary Current input : 100-5000Arms Secondary Output: 5Arms/1Arms Insulaiton Strength: 2KVac/min Insulation Resistance DC500V/100MΩ Working frequency 50-400Hz Operating Temperature-25to 50 Storage Temperature -30to 70 MEWOI-CT23CT55CT58,CT88,CT410,CT610,CT812,CT816 series of split type current transformers are mainly used in industrial urban network, agricultural network transformation project, easy installation, no need to disassemble any cable or bus-bar circuit, and support electrified operation, not affect the normal power consumption of users, save a lot of manpower and material resources for the user transformation project, and improve the efficiency of transformation. This series current transformer can be used in conjunction with relay protection, measurement and metering devices. At present, it is widely used in transformation projects such as semiconductor industry.
Sbh16-m.D amorphous alloy submersible transformer
Sc(b)h15 amorphous alloy dry-type distribution transformer Transformer can be installed indoors deep into the load center, so as to adapt to the need of high-density load of big modern cities. With the no-load loss reducing by 75% and the load loss reducing by 15% than that of gb/t10228 table 4 group i, the amorphous alloy distribution transformer is the state of the art energy efficient dry type transformer
HVDC transformers are key components of HVDC stations. HVDC converter and inverter stations terminate long-distance DC transmission lines or DC sea cables. This type of transformer provides the interface between AC grids and high power rectifiers and are used to control the load flow over the DC transmission lines. These actors adapt the AC grid voltage to an adequate level which is suitable for feeding the valve system of DC converter and inverter. Design options The design concept of HVDC transformers is mainly influenced by the rated voltage, rated power and transportation requirements like dimensions, weight and mode of transportation. Many large power HVDC converter station are located in rural areas of low infrastructure. Frequently, special geometrical profiles have to be fulfilled in order to move such transformers by railway. Typically, HVDC transformers are single phase units containing 2 winding limbs. This concept can include either 2 parallel valve windings (two for delta or two for wye system, fig. 5.8-1) or two different valve windings. In order to reduce the total transportation height frequently the core assembly includes 2 return limbs. Due to redundancy requirements in HVDC stations 3 phase units are quite uncommon. The valve windings are exposed to AC and DC dielectric stress and therefore a special insulation assembly is necessary. Furthermore, special lead systems connecting the turrets and windings have to be installed in order to withstand the DC voltage of rectifier. Additionally, the load current contains harmonic components of considerable energy resulting in highe r losses and increased noise. Above all, special bushings are necessary for the valve side to access upper and lower winding terminals of each system from outside. Conclusively, two identical bushings are installed for star or delta system. For approving the proper design and quality of manufacturing special applied DC and DC polarity reversal tests have to be carried out. The test bay has to be equipped with DC test apparatus accordingly and needs to provide adequate geometry to withstand the DC test voltage. HVDC Transformers react as coupling elements between the connected AC grids and high power rectifiers, and are necessary for adapting the voltage. They insulate the rectifier itself from the AC grid and generate a phase shift. New HVDC applications are seen between existing, well-established networks. A back-to-back link can easily combine two different AC networks together, even with different frequencies. Such solutions can also help customers to strengthen and optimize their networks. The changing environment provides more and more opportunities to HVDC solutions, and Siemens is prepared to provide its customers with either our solution or with converter transformers as a loose component .
Dry-type transformer.Power range is:100-20000-30000 kVA. Durable to instantenous temperature changes and also to short-circuit. 100% protected from moisture.It cant get fired has an ability to extinguish the fire. Does not contain any Halogen or Nitrogen.Price changes due to power range.
CY-KCT02 From 100A~6000A , Secondary current could be 5A 1A .. Features: .High quality compressivemeasurements .Available in a wide range oftransformer ratings .Accuracy up to Class 0.5 .Foot or burbar mounted TypicalApplication: .Switchgear .EnergyManagement Systems .InstrumentationEquipment .SplitCore Current Transformers are designed for assembly to an existing electrical installation no needto dismantle the primary busbar or cables.
This type CT is designed for easyinstallation in tight spaces and environment without removing the main busbaror cable .The connector uses the holding pressure of folding structure. Safetyisolation to protect the user from direct contact with the electrifiedbody.Meet the 600V,CATIII secure degree. Features: .Flexibleand light weights,exquisite appearance .Easily&quick installation in tight spaces .Excellentlinearity .Maximummeasuring current up to 550A Applications: .Power quality monitoring .Smart logger .Distributed measurement systems Mechanical Dimension: 462.png Technical index: Item Parameter Rated Primary 500A AC Output voltage 1Mv AC/A Amplitude Accuracy ±0.3%rdg. ±0.01%f.s.(f.s:500A,45Hz-66Hz,primary conductor in the center) Phase Accuracy ±0.5º(10-100%IIn )(45Hz-5kHz) The Amplitude Frequency Characteristic ±1%(45Hz-5kHz)(Deviation Accuracy) Conductor Impact ±0.5%(off-center) The influence of external electromagnetic fields =0.1A(In AC 400A/m electromagnetic fields) Maximum input current 550A AC Continuous (45-66Hz,Ambient temperature50º C Temperature Coefficient 0.02%reading data /º C Dielectirc strength 5312V ACrms/continue15seconds(circuits-iron core) The Maximum rated voltage 600V crms Operating temperature &humidity 0 to 50º (32-122º F), =80%RH(NO condensate) Storage temperature &humidity -10º C to60º C(14-140º F), =80%RH(NO condense) Indoors operating environment ,UP to 2000m above sea level Applicable Standards Safety:EN 61010-2-032:2002,CATIII ,Contamination II EMC:EN 1326:1997+A1:1998+A2:2001+A3:2003(classA) Measurable conductor diameter =Ø46mm Cable Length About3M Dimension About 79W*159H*40Dmm (Excluding Protruding parts) Weight About 380G
The “RCTA03 lamp Clamp-on Flexible Rogowski coil currenttransformer “is dsigned for easy installed in tight spaces and without the needfor dismantling the primary busbar or cables .It includes a flexible Rogowskicoil probe and electronic modules. The signal from the coil probe can beamplified by the electronic codules through the integration processing . Theoutput signal can be directly used in oscilloscope,digital multimeter or datalogger recording instrument Features: .Flexible and light weights,exquisiteappearance .Easy &quick installation in tightspaces .Excellent linearity .Maximum measuring current up to 130A Applications: .Power quality monitoring .CT secondary current detection .Smart logger .Distributed measurement systems Model: cy031.png General data: .Operating temperature&humidity:0 to 50ºC(32-122ºF), ?80% RH(Nocondensate) .Storage temperature&humidity:-10 to60ºC(14-140ºF), ?80% RH(Nocondensate) .Operating environgment:Indoor ,altitude upto 2000 meters .Standard safety: IEC61010-1:2001,300V CAT? Dimension: cy032.png Dimensions(mm) CY-RCTA03-305 WindowA 305 Coil OD B 333 Coil Length 1000 No Module Name 1 Flexible coil body 2 Coil Interface lock 3 Electronic modules plastic shell 4 Power Indicator(Red) 5 Overload indicator(Yellow) 6 Shift switch 7 Public BNC connector 8 Company logo 9 Product Model Code Eletrical Parameter: The test environment for the accuracy:23±5 ºC), ?85%RH Model Data CY-RCTA03-305 Current Range 60A/600A/6000A(10%-100%In) Output Sensitivity 500m V/A,5m V/A, 0.5m V/A Accuracy ±1%(10%-100% In)@45-65Hz Phase error ±1%(10%-100% In)@45-65Hz ±10º@20kHz Linearity error ±0.2%(10%-100% In) Position Sensitivity ±0.2%(The distance from the measured cable to junction is above 20mm External Influence ±1%Max (more than 200mm from the coil) Noise 8m V rms (60A) Temperature Coefficient 2m V rms(60A) Frequency Range ±0.08% Cof the reading data Power Min 100KO Power 2*AA/MN1500/LR6 Battery(400hrs) Eternal Adapter:4.5V DC Power LED indicator ON indication When normal power (Red light goes off after 3 seconds ) low battery indication(Red is always on) Overload LED indicator Overload above 120% of the range indication(yellow) Operating Voltage 600V AC RMS or DC Security Level IEC 61010-1:2001,600V CAT ?) Cable length 3m(Measuring head to the electronics module ) Output terminals 0.5m cable with safety BNC plug Weight 230g(measuring head),130g(Electronic modules)
JDZX10-12 voltage transformer, epoxy resin casting and single pole insulated VT, is widely used indoor for measuring current, electric energy and protective relaying in the isolated neutral system with the frequency 50-60Hz and highest voltage for equipment 12 kV. Usage Terms J: Voltage transformer D: Single-phase Z: Casting insulation X: Residual voltage winding 10: Design No. 12: Rated voltage Main technical parameter 1. Rated primary voltage:11/kV or 10/kV etc. 2. Rated secondary voltage:100/V?110/V ? 115/V? 120/V 3. Rated voltage of residual voltage windings:100/ 3V ?110/ 3V? 115/ 3V? 120/ 3V 4. Burden power factor: cosF=0.8(lagging) 5. Standards: IEC60044-2.2003 Instrument transformers-Part2: Inductive Voltage transformers Other technical parameters pls see as follow: x1204.png Remarks: Upon request we are glad to offer transformers according to other standards or with non-standard technical specs.
LZZBJ9-12A1(A2) current transformer, epoxy resin casting insulation and fully enclosed support construction, encloses primary & secondary windings and annular core in the epoxy resin casting body. The product has the feature of light weight, omni-directional installation, withstanding nastiness and dampness. It is widely used for measuring current, electric energy and protective relaying in the electrical system with the rated frequency 50- 60Hz and highest voltage for equipment 7.2 kV /12 kV . Main technical parameter 1. Rated voltage: 6.6 kV or 11 kV etc. 2.Rated secondary current: 5A?1A 3.Rated insulation level: 7.2/20/60 kV or 12/28/75 kV 4.Standards: IEC60044-1.2003 Part 1: Instrument transformers-Part1: Current transformers 5.Other technical parameter pls see as follows Rated transformation ratio(A) Accuracy classes combination Rated output(VA) (ALF) (FS) Short-time thermal current Ith(kA/S) Rated dynamic current Idyn(kA) Measuring Protective 0.2(S) 0.5 10P 10-200/5 0.2(S)/0.2(S) 0.2(S)/0.5 0.2(S)/10P 0.5/10P 0.2S/0.5/10P 0.2/0.5/10P 10 15 15 15 10 15 20 5 (10) 150I1n 375I1n 300/5 31.5 80 400/5 31.5 80 500/5 40 100 600/5 50 125 800/5 20 63 125 1000/5 80 160 1200~1500/5 80 160 1500~2000/5 100 160 2000~3150/5 130 160 Rated transformation ratio(A) Accuracy classes combination Rated output(VA) (ALF) (FS) Short-time thermal current Ith(kA/S) Rated dynamic current Idyn(kA) Measuring Protective 0.2(S) 0.5 10P 10-200/5 0.2S//0.5/ 10P 0.5/0.5/10P 10 15 15 15 20 10 15 5 (10) 150I1n 375I1n 300/5 31.5 80 400/5 31.5 80 500/5 40 100 600/5 50 125 800/5 63 125 1000/5 80 160 1200~1500/5 80 160 1500~2000/5 100 160 2000~3150/5 130 160 Remarks: Upon request we are glad to offer transformers according to other standards or with non-standard technical specs.
Electronic transformer Encapsulated transformer manufacturer Encapsulated transformer custom Encapsulated transformer supplier The contact: Ariel More favorable price please mail to: vtcarielzheng@126.com Trademark: VTC Coil Number: Autotransformer mount type: mount hole output voltage: 12V Power Range: 10VA Ferrite core: EI Insulation Class: UL class B,F,H,N.(optional) OEM: Yes Certification: UL RoHS CE Manufacture encapsulated 230V to 14V pcb mount transformer with VDE approval Features: 1.Different input voltage: 0-240VAC ( world wild use) 2.High effeciency : typical value:80% ( according to different power ). 3.No load power consumption:
electronic transformer High frequency transformer manufacturer High frequency transformer custom High frequency transformer supplier The contact: Ariel More favorable price please mail to: vtcarielzheng@126.com Trademark: VTC Coil Number: Autotransformer Ferrite core: EE25 Tianjin New Ventech Electronic Co., Ltd. is a joint venture specialized in producing various electrical transformer,mainly include PCB expoxy resin transformer, toroidal transformer, high voltage transformer,current transformer,common mode choke,line filter, inductor, etc, which are mainly used in power supply, home appliance, medical equipment ,communication product, wind power generation and Uninterrupted Power Supply, etc. We have upgraded production lines; we have obtained CE, VDE, UL certificates. All material meet RoHS and UL request. The products are sold not only in domestic markets but also overseas including USA, England, Germany, Italy, Sweden, Spain, Turkey, Japan and Korea etc. Our main customers are Electrolux, OMRON, SANYO, LG,Ariston,Panasonic, etc. We believe that we can become your reliable electrical transformer partner with best quality and favorable price.
electronic transformer Encapsulated transformer manufacturer Encapsulated transformer custom Encapsulated transformer supplier The contact: Ariel More favorable price please mail to: vtcarielzheng@126.com Trademark: VTC Coil Number: Autotransformer mount type: mount hole output voltage: 12V Power Range: 3VA Ferrite core: EI Insulation Class: UL class B,F,H,N.(optional) OEM: Yes Certification: UL RoHS CE Tianjin New Ventech Electronic Co., Ltd. is a joint venture specialized in producing various electrical transformer,mainly include PCB expoxy resin transformer, toroidal transformer, high voltage transformer, current transformer,common mode choke,line filter, inductor, etc, which are mainly used in power supply, home appliance, medical equipment ,communication product, wind power generation and Uninterrupted Power Supply, etc. We have upgraded production lines; we have obtained CE, VDE, UL certificates. All material meet RoHS and UL request. The products are sold not only in domestic markets but also overseas including USA, England, Germany, Italy, Sweden, Spain, Turkey, Japan and Korea etc. Our main customers are Electrolux, OMRON, SANYO, LG,Ariston,Panasonic, etc. We believe that we can become your reliable electrical transformer partner with best quality and favorable price.
PCB mount transformer silicon steel transformer supplier low frequency transformer manufacturer PCB expoxy resin transformer The contact: Ariel More favorable price please mail to: vtcarielzheng@126.com Trademark: VTC Coil Number: Autotransformer mount type: mount hole Power Range: 6.5VA Ferrite core: EI Insulation Class: UL class B,F,H,N.(optional) OEM: Yes Certification: UL RoHS CE Our services 1. We can provide samples of all kinds of Electrical Transformer,Inductor etc. 2. We can produce as your requirement(OEM, ODM) 3. If you have any special requirement, please don't hesitate to contact us, Ventech will make customized design to meet your needs. Tianjin New Ventech Electronic Co., Ltd. is a joint venture specialized in producing various electrical transformer,mainly include PCB expoxy resin transformer, toroidal transformer, high voltage transformer,current transformer,common mode choke,line filter, inductor, etc, which are mainly used in power supply, home appliance, medical equipment ,communication product, wind power generation and Uninterrupted Power Supply, etc.
electronic transformer High frequency transformer manufacturer High frequency transformer custom High frequency transformer supplier The contact: Ariel More favorable price please mail to: vtcarielzheng@126.com Trademark: VTC Coil Number: Autotransformer Ferrite core: RM10 High Frequency transformer suitable for EL/CCFL Inverter or DC/DC converter 1. Custom designs available 2. High efficiency of over 95% 3. High frequency range 10kHz-1MHz 4. High isolation strength 5. Lower profile and weight 6. high power density 7. High-temperature resistant 8. Operating temperature -40°C to +125°C 9. Power range 0.5w-800w EF EE EFD type high voltage high frequency ferrite core portable transformer Application: 1. VCRS, Copy machine , Audio equipment , Game machines 2. TV sets, Microcomputer equipment, printers, Terminals 3. communications control equipment 4.Switching power supply, chargers, alarm system 5. UPS, VCD/DVD players, audio and visual equipment 6. OA machines, inverters, chargers, alarm system Our services ?1. We can provide samples of all kinds of Electrical Transformer,Inductor etc. ?2. We can produce as your requirement(OEM, ODM) ?3. If you have any special requirement, please don't hesitate to contact us, Ventech will make customized design to meet your needs.
Amorphous alloy transformer Place of Origin: Shandong, China (Mainland) Brand Name: Juneng or customized Model Number: SH15 Usage: Power Phase: Three Coil Structure: toroidal Coil Number: two windings certificate: ISO9001 ISO14001 OHSAS18001 voltage ratio: 10/0.4 11/0.4 6/0.4 damp-proof method: full sealed cooling method: ONAN iron core: amorphous alloy frequency: 50 HZ winding: duplex winding Packaging Details:Main body in nude and the accessories packing in seaworthy standard wooden case or according to the requirement of customers. Delivery Detail:usually within 30 days after the deposit Description of Amorphous Alloy Transformer: Amorphous alloy transformer is a new energy-saving and environment-friendly product, recently launched by our company based on market needs.SH-15 amorphous alloy transformer is made by amorphous alloy cores. They are rolled into the shape of three-phase and five-column, thus result the height of this type of transformer is lower than the three-phase and three-column transformer. What's more, the vacuum oil injection technology greatly improves the insulation level of the transformer. Low-voltage winding generally adopts cylindrical structure by copper foil winding except a small capacity using copper wires.High-voltage winding adopts multilayer cylindrical structure, it makes the distribution of ampere-turns is balanced and the magnetic flux leakage is small. The high and low voltage coils are winded by wire tension device.They are then shaped by press-fitting, This enhances the ability of intensity and anti-short circuit. And we use the mounting plate when assembling the transformer, this increases the reliability. As for the tank structure and protector, etc, are similar to the whole sealed oil-immersed distribution transformer. Due to the special magnetic features of amorphous alloy material,the product technical performance indicators have reached the advanced level among the similar products in China at present. So it can replace the silicon steel core transformer, and be used in the distribution networks of outdoor or indoor. Meanwhile, because of the using of a fully-sealed structure, the insulating oil and insulating medium can't contact with air,So it can be operated under any environmental conditions, and is an ideal distribution equipment in urban and rural distribution networks. The no-load loss of this transformer is only about 30% of the S11 transformer with the same capacity. Compared with S9 transformer of the same capacity, the no-load loss decreases about 75%, the no-load current falls about 80%. User's operating costs can be greatly reduced, and the social and economic benefits are excellent. Advantages of Amorphous Alloy Transformer: 1.Amorphous metal transformer with alloy cores 2.High level of insulation 3.High mechanical strength, strong ability to withstand short circuit, safe and reliable operation 4.High adaptability to any environment 5.Significant energy-saving effect 6.Low noise, easy installation
Primary voltage: 230V Secondary voltage: 12V Secondary current: 42mA No-load voltage: 20.4V Ambient temperature: T 70/B Rated power: 0.5VA Dimensions (H): 19.8mm (maximum) Weight: 36g (approximately) With CE mark weight:36g height:19.8mm
Low magnetic noise High-efficiency Excellent loading regulation Easy assembly Very low no load losses and magnetizing current Half size and weight compared to EI transformer Various input options: 100/110/117/120/220/230/240V, 50/60Hz Dielectric strength: 3kV/1 minute 100% electric parameters test Power range from 18 to 5,000VA available According to customers' requirement Class B insulation system Optional single dual-primary weight:1.5kg height:48mm
jbk3 control transformer - Power Capacity¡êo40va-2500va - UEL Rated Input Voltage¡êo220v;380v - Rated Output Voltage(control):110V(127V) - Rated Output Voltage(illumination):24V(36V) - Rated Output Voltage(indication):6V(12V) jbk3 control transformer - Power Capacity¡êo40va-2500va - UEL Rated Input Voltage¡êo220v;380v - Rated Output Voltage(control):110V(127V) - Rated Output Voltage(illumination):24V(36V) - Rated Output Voltage(indication):6V(12V)
Current transformer, voltage transformer, fault indicator, power distribution equipment.
