Transformers (2 Units) Load tap switching transformer Standard JEC-220-2014 Phase number 3 Rated frequency 50Hz Cooling method ONAN / ONAF Rated Capacity (KVA) Primary 20000/22000 Secondary 20000/22000 Rated voltage (V) primary 66000 secondary 6600 Rated current (A) primary 175/192 secondary 1750/1925 Test voltage value (KV) primary L1 350 AC 140 secondary L1 60 AC22 Temperature rise limit Number of turns 65K Oil 60K 23T each in weight
Transformer working for medium frequency induction furnace, electric arc furnace, continuous casting machine, rolling mill steel plant. The S9, S10, S11 series of 20kV and 35kV three-phase oil-immersed rectifier transformers produced by our company meet the requirements of CE, UL, CSA, ROUSH, GB1094 "Power Transformer" and GB / T6451-2008 "Three-Phase Oil Immersed Power Transformer technical parameters and requirements "standard. The core is made of high-quality cold-rolled silicon steel sheet, and the coil is made of high-quality oxygen-free copper, which is beautiful in appearance and safe in operation. Widely used in steel mills, urban and rural industrial and agricultural power grids. Main functions and features: High reliability, advanced performance level and reasonable economic indicators. The iron core adopts step-shaped three-level joints, and the surface is painted with cured paint to reduce loss and noise. New winding structure, reasonable oil channel design, and new insulation structure to improve mechanical strength and short circuit resistance. The fuel tank has various forms, beautiful and generous. 220kV, 110kV and 66kV low loss series transformers; products with reliable performance, low partial discharge, low loss, low noise, high reliability, and strong resistance to sudden short circuit, its excellent performance has won the majority of users and related Experts highly praise. Partial discharge: at 1.5 times the rated voltage, the apparent discharge of the product is less than 80pC; Noise: Product noise of 63MVA and below is below 58dB (AN); Loss: No-load loss is about 30% lower than the IEC standard; Reliability: All in-service products have no damage accidents and oil leakage; Short-circuit resistance: SFZ11-50000 / 132 has passed the short-term ability test of the Netherlands KEMA and the National Transformer Quality Supervision and Inspection Center laboratory. Passed CE, UL, CSA, ROSH certification
Power transformer Transformer working for medium frequency induction furnace, electric arc furnace, continuous casting machine, rolling mill steel plant. 220kV, 110kV and 66kV low loss series transformers; products with reliable performance, low partial discharge, low loss, low noise, high reliability, and strong resistance to sudden short circuit, its excellent performance has won the majority of users and related Experts highly praise. Partial discharge: at 1.5 times the rated voltage, the apparent discharge of the product is less than 80pC; Noise: Product noise of 63MVA and below is below 58dB (AN); Loss: No-load loss is about 30% lower than the IEC standard; Reliability: All in-service products have no damage accidents and oil leakage; Short-circuit resistance: SFZ11-50000 / 132 has passed the short-term ability test of the Netherlands KEMA and the National Transformer Quality Supervision and Inspection Center laboratory. Passed CE, UL, CSA, ROSH certification Coil: A All coils are made of 100% oxygen-free copper, and high-voltage coils are tangled. Continuous structure, in order to improve the distribution characteristics under impulse voltage, to obtain a more uniform electric field distribution, the bracing pads are rounded to improve the high reliability of insulation. A Iron core: The core material is high-quality cold-rolled silicon steel sheet with high magnetic grain orientation, and adopts advanced German Georg automatic shearing line to control the burr of the cutting mouth to be less than 0.02 mm. The silicon steel sheet adopts the technology of not stacking the iron yoke. The joint of the silicon steel sheet is a 45 �° full oblique stepped joint. After the iron chip is stacked, the overall pressure and epoxy glue are used to make the iron core three-pillar two yoke become a strong , Flat, high vertical accuracy, effectively improve the no-load performance, while reducing noise. Between the iron core column and the inner coil, the iron core column is supported by a brace plate, the iron yoke is tensioned by a glass ribbon impregnated with epoxy resin, and the lower iron yoke and the lower fuel tank are topped by a back pressure nail bolt. In addition, the upper iron yoke and the upper fuel tank are fixed in three places, so the body can withstand the bumps during transportation without displacement in the fuel tank.
customized
Output voltage/ current mode Primary current: 50~600A
Power-frequency withstand voltages: 4000V 50Hz Insulation: 1000/ 500Vdc Working frequency: 50Hz/ 60Hz Operating temperature: -40~95
The exploitation of mineral resources has led to the decrease of non-renewable resources. The rising price of raw materials has greatly impacted the cost market and brought inconvenience to our life. Therefore, the recycling of non-renewable resources is imminent. 60% recyclable and renewable resource is from the recycling resource in the world, it's an important point to resolve these resources. The eddy current sorting machine is also called a non-ferrous metal sorting machine, an eddy current sorting machine, a copper-aluminum sorting machine, etc. It is mainly used for the recovery of non-ferrous metals( such as copper, aluminium, zinc, etc) from industrial and domestic waste, and the sorting range of non-ferrous metals with a particle size greater than or equal to 2 square millimeters . The sorting rate could reach 99%.
250 kVA OIL TYPE DISTRIBUTION TRANSFORMER Measuring winding resistances Measurinq rotation ratios Inspecting polarity or connection group Measuring short circuit and load losses Measuring idle losses and current Induced voltage test Applied voltage test Measuring insulation resistances Transformers, for which mounting, drying and oil filling works are completed, are subjected to below mentioned routine and typical tests as specified by TS 267 standard. Oil breakdown stress control Loss gap (tq) measurement (DOUBLE test) Measuring painting thickness Temperature increase (heating test) Measuring of audible noise level Boiler lifetime test (For Hermetic Transformers) Mechanical strength test against short circuits This test is conducted in CESI/ITALIA, IPH/GERMANY test laboratories.) Except for the mechanical strength test against short circuits, all typical tests are conducted in the laboratories of our company,
Place of Origin: Guangdong, China Brand Name: Abot Model Number: SG Usage: Instrument Phase: Three Coil Structure: TOROIDAL Coil Number: AUTOTRANSFORMER Input Voltage: 380V Frequency: 50-60Hz Output voltage: 220V Output stabilized voltage precision: �±1-5% Optional Capacity: 20KVA Certification: CE Working Temperature: -20~45C Brand: Abot Color: Gray Type: Dry Type
D20601G Compatible YD12001HSNL 10/100 Base-T Ethernet LAN Magnetic Transformer for Game Controller (DIP 24PIN Single Port ) It is compliant to IEEE 802.3 , UL, Reach, RoHs, ISO19001,ISO14001 standards.It can be used to Industrial PC, New Energy, Network Firewall, Smart Meters.
Built-in protection system, supporting intelligent protection such as overcurrent, overvoltage, short circuit, temperature, etc. Safety technology, escort your equipment Switch Power Transformers have high operating frequency, wide operating voltage range, large output power, etc. Widely used in switching power supplies, computers, electronic ballasts and household appliances, etc.
Transformer UTG48C10 Compatible YD48001GSNL 10/100/1000 Base-T Telecom Ethernet Lan Magnetics for 1/0 Controller Guard System (SMD 48PIN Dual Port )
Halo TG110-S055N2RL Compatible LINK-PP LP1102NL 10/100 Base-T Ethernet Telecom Lan Magnetics for Game Controller (Height 5.10 SMD 16 PIN Single Port ) It can be used to Industrial PC, Embedded Main Board, Automation, Fieldbus System.
The YS48001GNL speed 10/100/1000 Base-T Dual Port SMD, It is compliant to IEEE 802.3 , UL, Reach, RoHs, ISO19001,ISO14001 standards.It can be used to Industrial PC, Media Player, Game Controller, Set-top Box. Compatible with transformer UTG48C10 .
Custom-made Power Distribution Boards As Per Client Requirements.
First of all, we are a full-service company located in Hillsboro OR USA. We have at this time 2 brand new high Voltage transformers for sale. Please reply if you are interested and you need more information. Thanks in advance, Daniel.
First of all, we are a full-service company located in Hillsboro OR USA. We have at this time 2 brand new high Voltage transformers for sale. Please reply if you are interested and you need more information. Thanks in advance, Daniel.
We have available following ships spareparts for Sale: Product-Caterpiller step up and down transformer Part no-2N-8378
Specifications Condition New Frequency 0-50Hz, 100-200Hz, 200-400Hz Tensile Strength 125-150Mpa, 175-200Mpa, 75-100Mpa Features Easy To Install, Four Times Stronger, Superior Finish Warrenty 5yrs Automation Grade Automatic Production Power 100-250kw, 250-500kw, 50-100kw, 500-750kw
Specifications Application Industrial Use Condition New Frequency 50hz, 60hz Tensile Strength 0-25Mpa, 125-150Mpa, 175-200Mpa Features Easy To Install, Four Times Stronger, Superior Finish
