Transformer [Brand-New]

Brief Description

The insulation non-encapsulated dry-type power transformer is approved by America technology. With the advantages of safety, reliability, environmental friendliness, energy saving, fire and explosion protection, humidity and pollution resistance, strong overload capability, small volume and simple maintenance, and main performance indexes superior to domestic standards such as advanced design, reasonable structure and beautiful appearance, the product is a brand new transformer value-added scheme and is a new-generation energy-saving, safe, green and environmentally-friendly high-tech product!

TRANSFORMER : ALL TYPE : Dry Type/Air Cooled, Oil Cooled, Water.
BRAND: SCHNEIDER ELECTRIC AND ALL OTHER BRAND AVAILABLE.

we are trader of Distribution Transformer and supply all over world. We have 20 Years Experiance Technical team for Desining and Winding of Diffrent types of Transformer. We have 15 Years Experiance Technical Team for Testing of Transformers. We can supply transformer up to 33kV and up to 5000kVA.

Specification

Shell type LFP51.2-400-MT-XDD
Available electricity 21.094Kwh
Rated capacity 400Ah
Combination mode 16S2P
BMS conifguration 16S400A
Rated voltage 51.2V
Operating voltage range 41.6V~59.2V
Rated charge and discharge current 200A
Peak current 400A Continue @410A 3s
Rated charging and discharging power 10.24Kw
Peak power 20.48Kw Continue @20.99Kw 3s
Short-circuit current 0.8Ka@100us
Cycle life 6000 Cycle 80%DOD, 25
Communication mode CAN, RS485
Parallel number No
Remote data Bluetooth optional/Wifi
Weight 170kg
Dimensions (L*W*H) mm 585*280*1100mm
Operating temperature Charging 0 ~+50 / Discharge -10 ~+60
Relative humidity 0~95%
Storage temperature 3 Months -10 ~25 / 1 Year 0 ~25
Maximum working altitude 2000m
Class of protection IP21
Supports inverter
communication brands SMA/Growatt/TBB/Deye/GOODWE/Huawei/
Schneider/Victon energy/SOFAR/INVT
Installation mode Floor mounting
Power cable outlet mode Flank
Standards and certification Transport UN38.3
*1 Test conditions, cell voltage 2.6V~3.65V, the new battery at +25 ±2 0.5C charging and discharging, available power may vary depending on the inverter;
*2 Rated charge and discharge current and power will change due to temperature and SOC.

If you have some problems about Gel Battery , or want to know more details about Storage Battery, LiFePO4 Battery, Uninterruptible Power Supply, Portable Power Station, Solar Power System, etc. Welcome to contact us!

Pustunpower.com: lifepo4 battery 48v 51.2v, 50ah,100ah,150ah,200ah,300ah,400ah LiFePO4 Battery Pack

Tags Lifepo4 Battery Manufacturers, Lifepo4 Solar Battery, Storage Battery manufacturers

Used transformers

Used transformers

Power Transformer (35kV)
Oil-immersed Transformer
Products structure and technical features
The oil-immersed transformer produced by our factory have these advantages: low loss, low noise, high short circuit strength and good appearance. We company create these prefect products of that each parameter has reached to advanced level among domestic similar products by combining advanced manufacture equipments and technology.

Structure features:
Core and main body: it is used iron core cutting line ,all inclined ladder joints and improving flux trend to eliminate flux saturation phenomenon of iron core in joints . By doing these, it reduces the no-load loss, no-load current and noise of transformers. Adopting pulling-plank structure, in order to strengthen the ability of withstanding short-circuit, we put many nails around pressing planks and bracing plates are used as support between H.V and L.V yoke, make the iron core be a whole. The iron core sheet are coated by glue which are specialized for silicon steel , so that all silicon steels can be bonded together to make the iron core be  integral one, this effectively enhances mechanical strength and plays a positive role in the core anti-rust. The low part of the body and the oil tank are supported through bracing plates adopt" high intensity electric laminated" technology, to guarantee the low part of oil-immersed transformer's body safe and reliable.

Coil: The high-voltage(HV) coil adopts an interleaved-continuous structure, The low-voltage(LV) coil adopts an interleaved-continuous or spiral structure, are independently provided with voltage-regulating winding to balance the ampere turn of each winding-up, effectively lower the mechanical force to minimal level. In the transformer winding, there is a zigzag oil guide structure so as to fully cool all areas inside the winding, lower the temperature rise of the winding and the hot points of the winding and prolong the service life of insulation.

Oil tank: the tank's structure of oil-immersed transformer is bell jar type or suspended type, have a good looking and high mechanical strength. It adopts" flanged joint" technology in every key point (such as annular tubes, pressure valves, switches,etc.), which effectively avoid leaking oil.

Technical Parameter and features

Technical specification
1,voltage:35kV
2,voltage regulation: on load tap regulation ,off circuit tap regulation
3,capacity range:

S(B) H15 Amorphous Alloy Transformer (10kV, 20kV)
Amorphous Alloy Transformer
Product introduction:
Oil immersed transformer with amorphous alloy core is a new generation of energy-saving product. The iron core is the amorphous alloy material which imported from aboard. Its special advantages is low-load loss. Amorphous alloy transformer is widely used for urban and rural distribution network, especially applicable for the areas and users that pay attention to energy saving.
Product features:
No-load loss
It has the amorphous alloy which is a kind of soft magnetic material with same character in different directions. Its magnetization power is low, resistivity is high and loss of eddy current is low. The no-load loss and no-load current of the iron core used in this kind of transformer is very low. Compared with silicon steel S(B)9 series transformer, the no-load loss decreases about 75% and it decreases about 65%, compared with silicon steel S(B)11. It reduces the operation cost. It is very energy-saving.

Wind Power Generation Transformer
New Energy Dedicated Transformer
Product structure and features
General introduction
With the continuous growth of China's economy, the demand for electricity surged, energy has become the main contradiction. Because the traditional coal-fired and fuel power generation caused serious environmental pollution, so in order to be consistent with environmental protection requirements, wind power as a clean energy production that has been developed rapidly in our country , has become the main direction to solve the energy shortage. We company develop a series of wind power generation combination substation, which can change 690V voltage generated by wind power dynamotor to 35kVor 10kV voltage through rising and changing voltage, then send to gird system or users, finally finish the task of wind power generation. So, wind power generation combination substation is the best matching product of wind power generation system.
Structure and performance features
1, structure features
A, main body adopts the structure of common box transformer. Assemble high-voltage load switch, plug-in fuse, transformer body, off-circuit tap-switches and other H.V components in a sealed tank, transformer oil as insulating medium, its size is small and performance is excellent .

B, Overall combination type wind power substation is composed of H.V chamber, L.V. chamber, oil tank and radiator. Install chip radiator on the side of oil tank, the chip radiator is combined by guide pipe and cooling fin which can better adapt to high-power transformerâ??s cooling requirements. In order to prevent vandalism, to these cooling fins with weak mechanical, we will use steel shield that be punched cooling holes to enhance the protection. By substation, rise the voltage of power generated through wind dynamotor and merge into grids.

PV Power Generation Transformer
New Energy Dedicated Transformer
Product Introduction
In order to meet the needs of our national PV power generation, our company developed two series of PV power generation transformers on the base of wind power generation combination transformers.
1, ZG(F)SF11-Z.G-â?¡/35 series three-phase split type off-circuit voltage-change PV power combination transformer
The structure of this series of products is same as that of wind power generation transformers, except that L.V. side winding, outlet method and electrical equipments adopt special structures. L.V side is equipped with double-split winding and two outlets which can be connected with two PV generators at the same time, meanwhile, equipped with essential protective electric elements. This series of products are with characteristics of good electrical performance, small size, light weight, reliable operation, easy to install, high cost-effective, etc.
Features of productsâ?? structure
a, design thought: adoptsâ?� two generators, one transformerâ?� program, means two PV generators combines with one transformer. L.V side is equipped with double-split winding ,two outlets and L.V electric system which can be connected with two PV generators at the same time.
b, users can rise one transformerâ??s output capacity under the capacity of same generators, which can save usersâ?? investment and operational cost.
c, materials of transformersâ?? casings can be chosen according to different environmental requirements: conventional composite panels, stainless steel composite panels, non-metallic fiberglass cement, etc.
d, casing material has a good level of protection and corrosion resistance, which can effectively prevent wind, rain, snow and salt erosion
e, H.V. electrical equipments have five protection functions: H.V. fuse of substations and overload switchgear carry out interactive protection, prevent transformers working under the condition of lacking phase; H.V use three-position load switch that can be checked and repaired safely under the state of grounding; H.V overload switch and grid door of transformer chamber adopt â?? electric locking, realize the protection function of automatic power-off when mistakenly open the grid door.
f, transformer chamber adopts natural ventilation and automatic controlling forced cooling exhaust devices, has a exhaust system which can be controlled automatically with temperature change, can effectively control and low chamberâ??s temperature, meet the need of full overload operation.
g, low voltage equips with 690V main circuit breakers, over-voltage protection equipments , and we can design complete automatic measurement and intelligent control systems.