ASTEC DS650-3-002 650W Distributed Front-End Power Features: 1) Active Power Factor Correction 2) EN61000-3-2 Harmonic Compliance 3) Active AC Inrush limiting 4) High Density 5) No Min Load Required 6) Hot Plug Operation 7) N+1 Redundant 8) Internal OR-ing FET's 9) Active Current Share 10) I2C Interface 11) Smart Fan Speed Control Electrical Specifications: Input 1) Leakage Current: 1.4 mA @ 240 VAC 2) EMI/RFI: Class B 3) Effiency: 85% Typ 4) Input Range: 90 - 264 VAC 5) Frequency: 47 - 63 Hz Output 1) Main Output: Refer to Model Selection 2) Protection: OCP/OVP/OTP.
Specification: 1. Part No: MSD-24V-80W 2. Input voltage:170Vac-265Vac 3. Output constant voltage: 24V 4. Current :3.3A 5. Size:187*69*43mm 6. Weight:1080g/pc 7. CE & RoHS.
Model:TPD-03402 Description: 12V/5V-2A dual voltage output for DVR power supply Input Condition : 100 to 240VAC 50/60 Hz 1.0A Max Input Rated Voltage : 100 to 240VAC Input Voltage Range : 90 to 264VAC Input Rated Frequency : 50/60Hz Input Frequency Range : 47Hz to 63Hz Input Current : 1.0A Max Input Inrush Current : 30A Max Input No Load Power Consumption : 0.5W Max At 115Vac/230Vac Efficiency : 80% Min Rated Output Power: 34W Output Voltage & Current : 12V/5V-2A Dual voltage Output Line Regulation : 1% Output Load Regulation : 5% Output Over Shoot : 10% Max Output Ripple And Noise : 1% Max Output Rising Time : 20ms Max At 115Vac Output Hold up Time : 8ms Min At 230Vac Protection : OCP OVP SCP OPP Dielectric Withstand Voltage : 3KV 5mA 60s Leakage Current : 0.25 mA At 230Vac Operating Temperature: 0 to 70 Storage Temperature: -10 to 85 Relative Humidity: 5 to 95%.
Model:TPD-04501 Description: OEM Nintendo Wii AC/DC Adapter,Swicthing Power Supply Input Condition : 100 to 240VAC 50/60 Hz 1.2A Max Input Rated Voltage : 100 to 240VAC Input Voltage Range : 90 to 264VAC Input Rated Frequency : 50/60Hz Input Frequency Range : 47Hz to 63Hz Input Current : 1.2A Max Input Inrush Current : 30A Max Input No Load Power Consumption : 0.5W Max At 115Vac/230Vac Efficiency : 85% Min Rated Output Power: 45W Output Voltage & Current : 12VDC / 3.7A Output Load Regulation : 5% Protection : OCP OVP SCP OPP Dielectric Withstand Voltage : 3KV 5mA 60s Leakage Current : 0.25 mA At 230Vac Operating Temperature: 0 to 70 Storage Temperature: -10 to 85 Relative Humidity: 20 to 80%.
Containerised gen set For power plants having 40 mw capacity
Output Type: single output Input Voltage (V): 90VAC~132VAC/180VAC~264VAC (by switch) Input Current (A): 4.5A Max Efficiency: 75% Typ (230VACFull Load) Output Voltage (V): +48Vdc Output Current (A): 4.4A Rated Power (W): 211.2W Ripple/Noise (mVp-p): 150mVp-p Working Temperature (): -20 - +50 (refer derating curve) Withstand voltage(VAC):I/P-O/P:3KVAC,I/P-FG:1.5KVAC,OP-FG:0.5KVAC 1min Safety Standard: EN/UL60950-1,GB4943 EMC Standard: EN55022 Class B,EN61000-4-2,3,4,5,6,8,11 GB17626.5 Level3 Over voltage Protection: >115%-135% Rated output voltage Over Current Protection: N/A Over load Protection: >105%-150% hiccup mode,Auto recovery Short circuit Protection: Latched Over Temperature Protection: Auto reboot MTBF: 250K hrs 25 DimensionL*W*H(mm): 215*115*50mm Weightg/pcs: 680g/pcs.
80plus+ CE Certificate, 7*SATA, 3*4pin HD, 1*20+4pin, 1*FDD, 12cm or 14cm FAN, 1*PCIex 6pin, 1*PCIex 6+2pin, APFC, 1*P4, 1*8pin, I/O Switch. OEM packaging.
DIN-rail KWH energy meter is a new-style single phase two wire static active energy meter, it adopts special large scale integrated circuit and international advanced technology of digital and SMT techniques and so on. Its general goal is high reliability, higher accuracy, higher reliability, light and compact, it is carried out in every step of designing, producing, testing, aging and calibration. It's easy to realize the modern managing function. It is CE approved. Rated Voltage: 110V, 230V, 400V Rated Current: 1.5(6)a, 5(30)a, 10(40)a, 20(80)a, 10(100)a Accuracy: 1.0, 2.0 Stardand: Iec/En62053 Approval: CE.
.1 Description DEM8900-1/DEM8900-2/DEM8900-3 (short form for DEM8900) is designed by adopting the updated microprocessor and digital signal processing technology, which can be applied for monitoring the electrical system. DEM8900 can measure and analyze the real time electrical parameters, such as I,kWh,kvarh., Meanwhile, DEM8900 has functions of multi-tariff,RS485 communication ( MODBUS protocol),analog output, remote input and electrical pulse output. All our instruments fulfill all important requirements and regulations concerning electromagnetic compatibility and safety isolation (IEC61000, IEC1010 standard and EN61010 standard). The devices have been developed, manufactured, and tested in accordance with Quality Assurance System ISO 9001. 1.2 Measured parameters Note 1. DEM8900-1 measure current, active energy, active power (optional, with analog output) 2. DEM8900-2 measure current, reactive energy, reactive power (optional, with analog output) 3. DEM8900-3 measure Current, active energy, reactive energy, active/reactive power (optional, with analog output) 1.3 EMC and Safety standard IEC61000-4-2 (GB/T17626.2) IEC61000-4-8 (GB/T17626.8) IEC61000-4-4 (GB/T17626.4) IEC61010-1 (GB/T4793.1). Exterior Size:91*91*72mm 0.5KGS.
Detailed product description 1. Power meter measures voltage, current, power, power factor, kwh, kvarh 2. Rs485/ modbus 3. Power quality analysis 4. Di/do PMAC735 power meter features: 1. Suit for lv/ hv voltage system 2. Compact design with all real-time measurement 3. Consist of basic unit and optional modules 4. 10 years back-up of integrated energy data 5. Large lcd, high brightness, auto-scrolling 6. High accuracy, v or i is 0.2%, kwh is class 1 7. Ct and pt programmable 8. Pluggable terminals, easy to install 9. Panel size: 96 x 96mm 10. Password protect PMAC735 power meter basic function: Provide one rs485 communication, measures and display real-time parameters: 1. Voltage¡ªua, ub, uc, uab, ubc, uca, 2. Current¡ªia, ib, ic, in 3. Active power ¨c pa, pb, pc, p 4. Reactive power ¨cqa, qb, qc, q 5. Apparent power¡ªsa, sb, sc, s 6. Power factor¡ªpfa, pfb, pfc, pf 7. Frequency 8. Active energy¡ªkwh (4 quadrant) 9. Reactive energy¨c kvarh (4 quadrant) 10. Demand and max. Record for i, p, q, s 11. Unbalance rate for u, i 12. Max./ min. Value Pmac735 power meter di/ do modules: 1. 4 status input + 4 relay output 2. 8 status input + 2 relay output 3. 8 status input + 2 pulse output 4. Profibus communication module Pmac735 power meter optional function: 1. Up to 31st harmonic analysis, k factor, thd 2. Soe (event log) 3. One 4~20ma analog output. Pilot's packing; neutral packing; customized packing.
1.Product Profile QAM8300-1M power quality analyzer is an integrated monitoring, analyzing and controlling device that offers electrical parameter metering, harmonics metering and analysis, waveform sampling, measurement of Voltage swell, dip, interrupt, Voltage unbalanced ratio, fault record, event record, data record. QAM8300-1M can monitor and detect if the power quality fulfills IEC and EN standard. With its powerful I/O functions with exterior device, QAM8300-1M can perform harmonic control, PF adjustment, and demand monitoring functions. QAM8300-1M fulfils all the important requirements of IEC 61000-4-30 Class A standard. QAM8300-1M can work with our power quality monitoring and management software to provide energy management solutions for enterprises. With its strong networking capability, QAM8300-1M can display and record all the data records on the interactive trend chart. A data report can be formed periodically. The report can be used for fault analysis, statistics, real time monitoring purpose. QAM8300-1M fulfills IEC61000-4-30 A: 2003,IEC61000-4-15:2003,IEC61000-4-7:2002,EN50160,2004 etc standards. 2.Measurement Accuracy U, I: 0.1% U, I peak value, peak factor, flicker: 0.5% 3 phase Voltage unbalanced ratio: 0.2% 3 phase Current unbalanced ratio: 0.5% Frequency: 0 .002Hz Power factor: 0 .002 Power: 0.2% Energy: Active energy 0.2% IEC60687:1992(GB/T17883-1999) Reactive energy 0.2% IEC61268(1995) (GB/T17882-1999) Harmonics: IEC61000-4-30 class A Interharmonics: IEC 61000-4-30 class A Harmonic distortion rate: 2.5% 3.EMC and safety test EN61326-1 EN61000-4-2/3/4/5/12 IEC/EN61010-2001.
MPM8000 is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000 can measure and analyze real time data, such as U, I, P, Q, S, COS¦µ, F, kWh, kVAr, etc. MPM8000 has the following functions: RS-485 communication port, 2 energy pulse output (include active energy and reactive energy), Max/min data record, and SOE event record. MPM8000 can extend functions by choosing the external optional modules: harmonic analysis, 8 remote signals on/off mode, programmable 4 analog outputs (0~5V or 4~20mA optional), data storage, Profibus Com. protocol, Ethernet communication functions. The multi-tariff function allows the user to measure energy in any interval (the min. interval is 30min.), which can read the sum, sharp, peak, valley, flat energy data in 30 days, and measure 2nd to 63rd harmonics in statistics. All our instruments fulfill all important requirements and regulations concerning electromagnetic compatibility and safety isolation (IEC61000, IEC1010 standard and EN61010 standard). The devices have been developed, manufactured and tested in accordance with Quality Assurance System ISO 9001. EMC and safety standard IEC61000-4-2 (GB/T17626.2) IEC61000-4-8 (GB/T17626.8) IEC61000-4-4 (GB/T17626.4) IEC61010-1 (GB/T4793.1). Exterior Size:91*91*72mm. 0.5Kgs.
1, Input: 100 to 240V AC, 50/60Hz 2, Output power: 24W series 3, Output voltage: 3 to 24V DC 4, Output current: 10 to 4,000mA 5, Overload protection 6, Output over voltage protection 7, Short circuit protection 8, High efficiency Mini 75 % 9, DC socket (optional) 10, CEC power supply standard 11, CE approved 12, No Load Power Consumption ¡Ü 0.3 W at Rated Voltage 13, Ripple And Noise: Output voltage 1% 14, High-Voltage test : Primary to secondary: 3 kV 5 mA 60 S 15, Leakage Current : 0.5 mA (max) at input 240Vac 16, Operating Temperature Range 0--40¡æ 17, Storage Temperature Range: -20 --- 85¡æ 18, High Humidity Operation :+ 40 ¡æ and 90 ¡« 95% Humidity 19, Dimension : 74.0mm*41.0mm*47.5mm 20, Net weight: About 170 gram per unit. 21, Color : Black / White 22, The power adapter should have 50,000 hours according to MTBF. 23, Insulation Resistance:Primary to Secondary : 50 Meg. Ohms min. 500VDC. Customized.
Input Characteristics 1.Voltage: 90 ~ 264V AC Full range 2.Frequency: 47 ~ 63Hz 3.Input Current: 10.0A for 115VAC, 5.0A for 230VAC. 4.Inrush Current: 25A for 115VAC, 50A for 230VAC per power supply module. Output Characteristics: Output Voltage Max. Current +3.3V 25A +5V 25A +12V 41A -12V 0.8A +5VSB 3.5A Note: The combined total power from 5V & 3.3V shall not exceed 170W. 2pcs in 1 carton, N.W.: 9.5kgs, G.W.: 10kgs Carton size: 45x31x19cm
Universal Input: 100~240VAC 50~60Hz Protections: Short circuit/ Overload/ Over temperature O/P: High accuracy, low noise; hold up time¡Ý20mS Cooling by free air convection; Auto recovery; Operation temperature: -40¡æ~+70¡æ; 100% full load burn-in test for 8 hours High Efficiency, high reliability; Built-in Class B EMI Filter Long life of 50,000Hours, 2 years warranty Compliance to EN61347-2-13 /IEC61347-2-13 /UL8750.
Universal Input: 100~240VAC 50~60Hz Protections: Short circuit/ Overload/ Over temperature O/P: High accuracy, low noise; Hold up time 20mS Cooling by free air convection; Auto recovery; Operation temperature: -10~+50; 100% full load burn-in test for 8 hours High Efficiency, high reliability; Built-in Class B EMI Filter Long life of 50, 000Hours, 2 years warranty Compliance to EN60950 /IEC60950 /UL60950.
Profile: MPM8000 is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000 can measure and analyze real time data, such as U, I, P, Q, S,COS, F, kWh, kVAr, etc. MPM8000 has the following functions: RS-485 communication port, 2 energy pulse output (include active energy and reactive energy), Max/min data record, and SOE event record. MPM8000 can extend functions by choosing the external optional modules: harmonic analysis, 8 remote signals on/off mode, programmable 4 analog outputs (0~5V or 4~20mA optional), data storage, Profibus Com. protocol, Ethernet communication functions. The multi-tariff function allows the user to measure energy in any interval (the min. interval is 30min.), which can read the sum, sharp, peak, valley, flat energy data in 30 days, and measure 2nd to 63rd harmonics in statistics. EMC and safety standard IEC61000-4-2 (GB/T17626.2) IEC61000-4-8 (GB/T17626.8) IEC61000-4-4 (GB/T17626.4) IEC61010-1 (GB/T4793.1) Measured Scope: The meter MPM8000 can be applied in single phase, 3-Ph 3Wire, 3-Ph 4Wire system. It can be applied vastly in the field of secondary measurement in high Voltage, low Voltage system, or transmission of measured data. Measured accuracy Parameters Display Direction Accuracy Voltage 0~9999.9kV Class 0.2 scope:5%~100%V Current 0~9999.9kA Class 0.2 scope: 5%~100%A Zero sequence Current Class 0.5 Power factor -1~+1 Directional Class 1 Frequency 45~65Hz ¡À0.01Hz Active Power -9999~9999MW Directional Class 0.5 Reactive Power -9999~9999MVAr Directional Class 0.5 Apparent Power 0~9999MVA Class 0.5 Active Demand -9999~9999MW Class 1.0 Reactive Demand -9999~9999MVAr Class 1.0 Active Energy 0~9999999.99Mwh Directional Class 1.0 Reactive Energy 0~9999999.99MVArh Directional Class 2.0 Phase Angle 0.0¡ã~359.9¡ã Directional Class 2.0 Current total harmonic % 0~100% Class 2.0 Voltage total harmonic % 0~100% Class 2.0. 1unit/carton, 36 unit/big carton.
Model FTG950E Rated frequency (Hz) 50 Rated voltage (V) 230 Rated output power (Watt) 650 Max output power (Watt) 750 Rated rotation speed (rpm) 3000 DC output 12V8A Lube oil brand SAE10W30 (above CC grade Noise level dB (A)/7m (zero load-full load) 57 Structure model open-frame Overall dimensions (mm) ( L x W x H ) 420 x 360 x 340 Net weight/gross weight (kg) 20.5/22.5 Engine type single cylinder, 2-stroke, air-cooled, OHV, gasoline engine Displacement(cc) 63.
Product Model:FGF2500X(E) Model FGF2500X FGF2500XE Rated Frequency (Hz) 50 60 50 60 Rated Voltage (V) 220 110/220 220 110/220 230 115/230 230 115/230 240 120/240 240 120/240 Rated Power (W) 2000 Max Power (W) 2200 Fuel Tank (L/US gal) 15/3.96 L (mm) 590 W (mm) 430 H (mm) 435 Net Weight (kg/lbs) 42/92.61 45/99.22 Engine Type 1-cylinder, 4-stroke, air-cooled, gasoline engine Displacement (ml) 163 Max Engine Power (kw/hr) 3.7/5 Ignition System TCI Starting System Manual Manual/electric Continuous Running Time (hr) 10.5 Lube (L/US gal) 0.6/0.16 Noise (db) 84.
CO2 laser power supply, special power CO2 laser, YAG laser welding machine power source, YAG laser cutting machine power, fast-axial flow laser power, Helium-neon laser tube laser power, YAG krypton lamp laser power, laser power supplies, DC UPS, DC - DC converter, xenon lamp power supply, high voltage power supply, laser power accessories, AC voltage source, switching power supply series.
