24V Programmable Power Supply

SK10000 SK13530 programmable power supply is a new generation of programmable DC power supplies. It protects itself by warning and cutting off output once fun controlling module gets fault, transistor over-heating, and internal bus gets fault. It is of programmable CV/ CC adjustable step. Brief Introduction Programmable DC Power Supplies SK13530 programmable power supply is a new generation of programmable DC power supplies. It protects itself by warning and cutting off output once fun controlling module gets fault, transistor over-heating, and internal bus gets fault. It is of programmable CV/ CC adjustable step. The two working states, CV and CC, can be switched varying with the load. Meantime, the external voltage sampling terminal is supplied to output stable voltage for user load within the range of wire voltage drop. SK13530 programmable power supplies are widely applied in national defense, institution, university and factory, especially in the areas of computer measuring and automatic control system as DC power supply.  Features All digital controlled, output 1mV/1mA step High stability, Low drift LED display the voltage/current and working status visually Intelligent temperature controlled fun with low noise Storage and recall function OVP (Over Voltage Protection) function Keypad locked function to avoid the misoperation Standard RS232 interface, optional USB SPECIFICATIONS Model SK11204 SK16008 SK13515 SK12025 Output Range 120V/4A 60V/8A 35V/15A 20V/25A Output Power 500W Resolution 1mV/1mA Source Effect CV â?¤1Ã?10-5+1mV CC â?¤1Ã?10-5+3mA Load Effect CV â?¤1Ã?10-4+3mV( Sense On) â?¤1Ã?10-4+30mV( Sense Off) CC â?¤1Ã?10-4+3mA Period and Random Deviation  (PARD) CV â?¤1mV CC â?¤6mA Accuracy Voltage â?¤±ï¼?0.05%+10mVï¼? Current â?¤±ï¼?0.2%+50mAï¼? OVP â?¤±ï¼?0.5%+0.5Vï¼? General Characteristics Power AC220V(1±10ï¼?)V,50(1±5ï¼?)Hz Interface RS-232 (standard) USB (option) Dimension & Weight 225Ã?153Ã?650 mm, Approx 25kg

GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services. Safe and reliable High quality li-ion cell for mobile use Laser welding connection with high strength and low impedance Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation Damping pad design to improve the impact resistance of the system IP54 safe and reliable operation in outdoor environment Serially designed PCS and battery pack eliminates circulating current and improve system reliability. Integrated BMS,DC, AC multi-layer protection, maximum safety performance design Efficient and Convenient Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion Easy access to PV and diesel generator, intelligent muli-energy management. Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring Multi systems could be connected in parallel Cost optimization One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc. Small size, light weight, less space and installation cost Long cycle life, low failure rate, reduce operation and maintenance investment Maximize green energy utilization. Rated output power: 150KW Rated energy: 225KWH

SK3323J/3325J Programmable Linear DC Power Supply SK3323J/3325J Programmable Linear DC Power Supplies are widely applied in national defense, institution, university and factory, especially in the areas of computer measuring and automatic control system as DC power supply. FEATURES * Three outputs, the maximum power is up to 338W * Lowe Ripple and Noise: â?¤1mV / â?¤3mA * Standard Timing Output * Comprehensive over-voltage and over-temperature protection * Fully remote control interface: LAN, USB and RS-232 * 5 digit LED display can show voltage, current and power simultaneously. SPECIFICATIONS Model SK3323J SK3325J Channel CH1 0~32V/0~3A 0~32V/0~5A CH2 0~32V/0~3A 0~32V/0~5A CH3 0~6V/0~3A Line Regulation Voltage CH1, CH2,CH3 â?¤1Ã?10-4+3mV Current CH1, CH2,CH3 â?¤1Ã?10-4+500μA Load Regulation Voltage CH1 â?¤1Ã?10-4+3mV â?¤1Ã?10-4+5mV CH2 CH3 â?¤1Ã?10-4+3mV Current CH1, CH2,CH3 â?¤1Ã?10-4+500μA Programming/Readback Accuracy Voltage CH1 â?¤±(0.05%+20mV) CH2 CH3 â?¤±(0.05%+20mV) Current CH1 â?¤±(0.3%+5mA) â?¤±(0.3%+10mA) CH2 CH3 â?¤±(2%+20mA) Ripple and Noise Voltage â?¤1mV Current â?¤3mA Display resolution Voltage 1mV Current 1mA Display Digits Voltage 5 digits Current 4 digits Other function Timing Output Over temperature Protection (Realize through hardware)  Over voltage Protection  General Characteristics Rated Voltage 220-230 (198-242)V Rated Power  0.5kW  0.7kVA  0.6kW  0.8kVA Rated Frequency 50 (45-60) Hz USB charging Interface 5V 2A Remote Interface LAN, USB, RS-232 (standard) Dimension 256Ã?160Ã?440mm3 Weight 9KGs 10KGs

The ANFP series programmable AC power supply adopts FPGA digital control, instantaneous waveform control and high-frequency pulse width modulation (SPWM) technologies. It has the advantages of fast response speed, high output accuracy, and superior waveform quality; it can withstand 3 times the rating Current impact capability, strong load adaptability; with multiple output modes and complex programmable functions, which can achieve test requirements such as ladder, step, gradual change, etc.; with three-phase unbalanced output mode, to achieve relevant regulatory tests or simulate special power grids And so on. It can be widely used in laboratories, quality inspection units, scientific research institutes and certification centers. Features: 1. Adopt FPGA digital technology, realize accuracy control and high quality sine wave output; 2.Advanced power management mode: three-phase standard mode, three-phase unbalanced mode (three-phase voltage can be adjusted independently, phase difference 0~359.9�° adjustable), three-phase independent mode (three-phase voltage, frequency, can be adjusted independently) Parallel single-phase mode (three-phase parallel, single-phase output); 3.Programmable step, stage, varations function, can realize relevant regulations; 4.Harmonic function,2-40 times superposition; 5.Operating in over current shock (up to 3 times of rated current)within 2s, start the impact load of 1/3 capacity of power supply directly; 6.Adjustable voltage and frequency during output status, frequency change without transit time; 7.Measurement: voltage, current, current peak, frequency, active power, apparent power, power factor, voltage peak factor; 8.Online monitoring: monitor IGBT temperature, transformer temperature, fan speed, input voltage and other parameters during output status; 9.Operating data recorders: keep the record of power supply status and alarm code automatically during alarming, save the maintenance time; 10.Fan speed will be adjustable automatically with the temperature of power supply to reduce the noise; 11.Lock key, user-friendly design, automatically locking without operation for 5 minutes to prevent from operation mistakes; 12. Combination cabinet, 8" large-screen color LCD; 13.Standard RS232, optional RS485, GPIB, Ethernet, analog control and other remote communication/control. Application: 1. Output mode management (standard three-phase output, separated three-phase output, parallel single-phase output) 2. Over shock capacity: impact load of 1/3 capacity of power supply directly without soft start

The AN51(F)low-power series DC power supply adopts high-frequency PWM control and phase-shifted full-bridge conversion, fast dynamic response, strong over-current capability, low output ripple, featuring compact, light, quiet, high efficiency, simple operation and cost-effective. It can be used for manufacturing, testing and maintenance of electronic equipment such as motors, power tools, automotive electronics, chips and electronic components, switching coils and DC switches, aircraft and airborne equipment, radar, navigation, etc., as well as industrial and mining enterprises, colleges and universities laboratories, research institute, etc. Features: Colorful LCD display, digital keys,Convenient and easy for operation. 350mm deep full range of standard chassis, suitable for system integration and portable applications. High frequency PWM and full-bridge conversion technology, with high efficiency. Strong current/power overload capacity, up to 100%. Exceptional output stability. Voltage drop compensation terminal for large current output. Complete protection to ensure normal operation of power supply unit and load security. Serial/parallel output, convenient expansion.

The AN53(F) series DC Testing Power adopts Active Power Factor Correction technology, high frequency LLC multi-resonant soft switching inverter technology, to achieve high power factor, fast dynamic response, low output ripple, high power density, and Constant Power (CP) wide range output. It has small size, light weight, low noise, high efficiency and easy operation etc. It can be used for manufacturing, testing and maintenance of electronic equipment such as aircraft and airborne equipment, radar and navigation etc, as well as industrial and mining enterprises, college laboratories, institutes and so on. Features: Wide range output up to 3 times of "matrix" power supply of same power; Active Power Factor Correction, full load power factor of more than 0.99; High frequency LLC multi-resonant inverter with efficiency up to 0.93; Industrial best transient response speed; Constant Voltage (CV), Constant Current (CC) and Constant Power (CP) output for multi applications; Powerful programmable function, flexible settings; Built-in precise voltage/current measurement, stable output; Lead drop compensation terminal for output lead at large current; Complete protection for normal operation of power supply unit and load security; High brightness color LCD display, beautiful, simple, intuitive; Supports parallel output, expanding power/current range; Standard host software.

Input Voltage: AC 110V - 220V Output Voltage: DC 24V 40Amp Output Wattage: DC 1000W Used In LED Strip Light And CCTV Camera Good Quality Genuine Products