DESCRIPTION DTSD1088 three phase multifunctional meter is made to accurately measures total active/reactive energy, forward and reverse active/reactive energy and maximum demand. And in real-time it also measures and takes in process parameters like active/reactive power, apparent power, voltage, current, power factor, frequency and so on, and implements time-of-use control, automatic storage of reading-day demand, and records of load profile and events. DTSD1088 meter realizes time of use energy measurement and efficient processing in ease. It complies with applicable standards of IEC62052-11, IEC62053-21, IEC62053-23, IEC62053-661, IEC62054-21, IEC62056-61, IEC62059-11 and IEC62059-21. FEATURES 1.Customized meter design for Finland Utility. 2.Special terminal block connection for easy wiring. 3.Terminal cover &front cover with detecting features. 4.With backup battery for RTC. 5.Load Profile(Optional) 6.MD measurement 7.Over-load protection: Automatic power-off as load exceeds the specified value(optional) 8.With optical communication port(IEC1107) 9.Open protocol: DLMS/COSEM(Optional)
DESCRIPTION DTSD1088 three phase multifunctional meter is made to accurately measures total active/reactive energy, forward and reverse active/reactive energy and maximum demand. And in real-time it also measures and takes in process parameters like active/reactive power, apparent power, voltage, current, power factor, frequency and so on, and implements time-of-use control, automatic storage of reading-day demand, and records of load profile and events. With infrared, RS485, PLC and GPRS communication equipped, DTSD1088 meter realizes time of use energy measurement and efficient processing in ease. It complies with applicable standards of IEC62052-11, IEC62053-21, IEC62053-23, IEC62053-661, IEC62054-21, IEC62056-61, IEC62059-11 and IEC62059-21. FEATURES 1.Functional LCD displays(menu driven, scrolling function, IR remote control mode) 2.Events record: Power-on/power-off (latest ten time), power quality monitoring(10 times), meter cover open(10 times recorded and can be read by MDM software). 3.Load curve recording: Active/reactive energy, voltage(3 phases), current(3 phases), power factor(3 phases) and time stamp(DD/MM/HH/YY) 4.External relay 5.Over-load protection: Automatic power-off as load exceeds the specified value(optional) 6.RTC, broadcast time synchronization via communication interface(could be set by GPS time via the MDM) 7.Optional multi-communication: PLC based on OFDM according to CENELEC standards(A-band), GPRS(SIMCOM-chip), RS485, integrated M-Bus(extended connection to gas and water meters) according to OMS standard. 8.Open Protocol: DLMS/COSEM 9.Advanced AMI integration (Optional)
DESCRIPTION The DDS1088 single phase two wire electronic meter is made of high quality optimized long life components and designed in advanced SMT technique with good performances on reliability, accuracy and load ranges.DDS1088provides metering solution benefiting both consumers and power utilities. It complies with theapplicable standards of IEC1036, IEC62052-11, IEC62053-21. FEATURES High Accuracy measurement with cyclometric register display, 5 digits. Wide operating voltage range 0.8Un ~ 1.15Un. Long time precisely works without calibration and limit error linear maintains flat during heavy loading from start to end. With active impulse LED indicator and reverse energy LED indicator With cover of terminal block made by transparent material. Measures active energy and reverse always add to positive. Meter Base and Cover ultrasonic Sealed
Description The ddsy1088 single phase keypad energy meter measures total active energy.It is STS certified. and complies with the standards of IEC62052-11, IEC62053-21, IEC62055-41 &IEC62056-21.BS standard complied. It can be inserted the plug-in communication module to achive the AMR/AMI solution.And with built-in relay,it can be remote control. Function 1.Easily configurable Prepaid & Postpaid mode by token 2. Anti-tamper 3. Load profile 4. Exchangeable, optional communication module:GPRS/3/4G/PLC/GSM/Ethernet 5.Real time measures voltage, current, frequency, active power, etc 6.Open Protocol: DLMS/COSEM 7.Programable multi-tarrif
Place of Origin: Henan, China Brand Name: AFT Model Number: AFTLD Type: Variable Area Water Flowmeters Accuracy: 0.2% 0.5% Liner: PTFE , Rubber,F46,PFA Connection: Flange,Clamping, thread, clamps Output: 4-20mA /RS485/HART/PROFIBUS DP Medium: milk beer drink water Protection grade: IP65 / IP 68(optional) Ambient temperature: -25~ +150â?? Power supply: 220VAC/ 24VDC Material: carbon steel Product Name: Digital modbus chemical magnetic flow meter for sewage
Input: AC100-240V Output:DC12V 5A Size: 116x53x34mm Certificate: CE, CB, CCC, ERP, C-TICK, SAA, MEPS, FCC. UL, KC, PSE, DOE Outlet Way:With dc cable (1.2m /1.5m/1.8m/OEM) Color Available:Black/White/OEM Protections:Over Voltage/Current/Power Protection;Over charging and over discharging protection; Short Circuit Protection Aging Test:100% test for 2hours Application:Laptop, security monitoring, LCD / LED monitor, LED light, LED strip, TV box, mobile hard disk, speaker, printer, set top box,CCTV Warranty: 1 year OEM/ODM service is available Factory qualification: BSCI audited ISO9001:2015 ISO14001:2004 National high-tech enterprise Factory advantage: Own SMT & AI line Automated production lines for transformer MES system: record and track all products 2 factories and 500-1000 employees
"FAMAGA Group OHG, the global supplier of industrial equipment and spare parts, is glad to provide encoders by Power Supplies Pepperl+Fuchs: We supply a complete range of the manufacturerâ??s catalog, including the following items: Pepperl+Fuchs F2D0-FB-EX4.CGS Pepperl+Fuchs 132960 Pepperl+Fuchs 231364 Pepperl+Fuchs 248764 Pepperl+Fuchs 132958 Pepperl+Fuchs 231194 Pepperl+Fuchs KFD2-UT2-Ex2 Pepperl+Fuchs KFD2-STC4-EX2 Pepperl+Fuchs UC2000-30GM-IUR2-V15 Pepperl+Fuchs 106437 Pepperl+Fuchs 46904 Pepperl+Fuchs 102157 Pepperl+Fuchs 190653 Pepperl+Fuchs 194775 Pepperl+Fuchs 231193 Pepperl+Fuchs 248767 Pepperl+Fuchs 71816 Pepperl+Fuchs KFD2-EB2 Pepperl+Fuchs KFD2-UT2-EX1 Our company is also pleased to offer products of other brands: Bei Sensors IBH Softec Schmersal BALLUFF Pepperl+Fuchs Bernstein Di-Soric Elobau Univer Eltra Aventics FESTO Camozzi Euchner END-Armaturen TAMAGAWA SENECA Airtac Murrelektronik Azbil Yamatake FRANKE-Filter Endress+Hauser IFM Ipf Electronic Kieback & Peter MD Micro Detectors Bihl Wiedemann ANDERSON-NEGELE KITAGAWA Georg Schlegel Metal Work Kipp Allen-Bradley Netter Vibration Kuebler / K�¼bler RAFI LINDY 4B Braime SOUTHCO ELGO Electronic FAG RECO Pilz AIRTEC Pneumatic COMITRONIC-BTI L�¼tze Hydac Barksdale Keyence AirCom Pneumatic Garlock Mac Valves MAHLE (Filtration Group) Riegler Baumer Elreha Sick Siko FAMAGA Group OHG is a family-owned company with many years of experience in the supply of components and spare parts for industrial enterprises around the world. Our mission is to provide fair prices, reducing the cost of production for our customers. A significant network of suppliers around the world allows us to supply any equipment, which client needs on favorable terms. Therefore, the list of equipment we provide is tenfold greater than the catalog presented on this site. You are welcome to check the full catalog on our website."
WSD-GZTW-2 is a communication power supply designed for different capacity users. The system configuration consists of monitoring module, communication power module, AC/DC monitoring module, insulation monitoring module, battery patrol module, switch monitoring module, distribution unit, storage battery and cabinet body â? .Direct Current Panel WSD-GZTW-2 Microcomputer Controlled Communication Power Supply Screen is a communication power supply designed for different capacity users. The system configuration consists of monitoring module, communication power module, AC/DC monitoring module, insulation monitoring module, battery patrol module, switch monitoring module, distribution unit, storage battery and cabinet body. It has the characteristics of simple operation, intelligent management, high â?¡.System characteristics 1) Automatic switching of two AC inputs to ensure the normal operation of the system; 2) Wide range of input voltage and strong adaptability of power grid; 3) HZ-JK02T monitor, LCD display, Chinese menu, friendly and rich interface, simple and convenient key operation; 4) It has comprehensive system setup, operation information query and various alarm functions. 5) Intelligent battery charge and discharge management, perfect and reliable temperature compensation function; 6) The rectifier module adopts electrified hot plug-and-pull, which makes daily maintenance convenient and fast. 7) High precision dynamic current sharing, which can operate independently, principally or under control. 8) Extensible battery detection 2 groups 110 knots, insulation detection 240 routes, switch detection 160 routes, compatible with inverter power module, DC conversion module; 9) The system adopts multi-level password authority management to restrict the operation of unauthorized personnel and ensure the safe and reliable operation of the system. 10) Built-in RS232, RS485 two communication interfaces, through the background monitoring and operation monitoring system to implement the "telemetry, remote control, remote communication, remote adjustment" four remote functions, to achieve unattended; 11) Support RTU, CDT, MODBUS three communication protocols. (1) Signal devices can be added according to user's needs to realize the alarm function of accident signal and warning signal. (2) The different functions of the configuration will be different. See the function description of the module selected by the Department for details.
CP-C moving coil panel meter with sprung toe bearing which is insensitive to external magnetic fields. The movable organs of the movements are stored in sprung jewels in order to protect them against crushes and vibrations. These instruments only measure DC current or DC voltage. By using core magnets of high quality the moving coil instruments have a almost linear scale course. Due to their low consumption they are especially suited for the application with shunts, impulse transmitters, thermo couples and for the connection to our electronic transducers. The instruments can be delivered for direct connection up to 100 A with a built-in shunt. FEATURES M4 screw connections with clamps make this easier Clamping the connecting wires. Housing use matiral match UL94V-0 standard All fastenings suitable for shaking and shock resistance. Accept special customization requirements
CA-212 has been designed to ensure high accuracy in power factor regulation and excellent utilization of capacitor banks and relays in three phase 3 wire electrical grid common range for all network voltages from 100V to 440V system reactive power compensation front panel is equipped with a 3-digits 7 segments display to show the present value of power factor voltage and line current. Max 12 steps relay output for contactor easy commissioning optional LCD display screen(provide power monitor function and CT ratio setting). FEATURES I / U / COS measurement Three digital LED display Max 12 control steps (default 6 steps) Used in three-phase balance gird Self-powered from bus line
CB-212 is advance three phase 3 wire APFC display provide user-friendly interface and ease of access to parameters for manual setting built-in power analyzer allowing the instantaneous display of any electrical parameter (voltage current reactive power harmonics etc. With THD protection function not affected by the harmonics can protect capacitor from harmonic interference. Max 12 step control 5A/250V relay output or 12VDC output. Optional RS-485 communication port easy for user connect to PLC and build SCADA system. Higher measurement accuracy(0.5) and system stability it is cost effective ideal for OEMs and panel builders solution. FEATURES I / U / KW / KVAR / HZ / COS measurement and display 93*70 LCD display Anti-harmonic design Max 12 steps capacitor control
CD-212 is ready for operation with its preset functions immediately after installation without any modifications or adjustments. With smart switching control identifies the power of the connected capacitor stages and connects or disconnects them in an optimized manner as required by the actual mains conditions. This guarantees that optimum power factor correction is achieved with the minimum number of switching operations. Dynamic compensation response time less than20ms work with static contactor provide zero-crossing switching and harmonic protect function Suitable for welding steel rolling machinery cranes oil field pumping units wind power generation piling machines and other varies equipment with large instant impact system. With RS485 communication port can control extra 3 sets CD-212 build Max 48 step control. FEATURES Automatic detect electrical network system status, do not need special configuration Large size TFT LCD display, one screen can show more info than segment LCD screen Various automatic protection functions can make sure capacitor bank long term working With basic electrical parameter measurement and display (I / U / KW / KVAR / KVA / HZ / COS) Provide power quality statu display (Current & Voltage wavefrom and 2-31th Harmonic) Record past 4 days site Power factor trend, display in visualization graph
CP-PF series meter using on single phase or 3- phase system measure cos Ï?i, has a moving coil meter movement that shows by an electronic circuit the phase shift between voltage and current (cos. Ï?). Scales are available between 90° and 360° phase shift, as well as capacitive and inductive. FEATURES M4 screw connections with clamps make this easier Clamping the connecting wires. Housing use matiral match UL94V-0 standard All fastenings suitable for shaking and shock resistance. Accept special customization requirements
CP-W and CP-var analog power meter consists of a moving coil meter with installed transducers which measures the active / reactive power in a sinusoildal or not sinusoidal current circuit and which transformes it into an analogue signal. This is then passed to the moving coil movement. FEATURES M4 screw connections with clamps make this easier Clamping the connecting wires. Housing use matiral match UL94V-0 standard All fastenings suitable for shaking and shock resistance. Accept special customization requirements MODELS Ordering info Measurement range (Include CT/VT ratio) Overload (Amp/voltage reading) Accuracy class Operation frequency Marine use or not
KLY meters are direct acting analog electrical measuring instruments. They are mainly used on the distribution, control panel of power plant and other different apparatus to measure current, voltage, frequency, power, power factor, synchroscopes. Phase sequence and other non-electric values The digital meters measure and display the current, voltage, frequency, power, power factor in electric power network and automation control system Operating Temperature KLY Series:-25C~+55C CP Series:-20C~+40C Storage Temperature -40C~+70C
CP-PF series meter using on single phase or 3- phase system measure cos Ï?i, has a moving coil meter movement that shows by an electronic circuit the phase shift between voltage and current (cos. Ï?). Scales are available between 90° and 360° phase shift, as well as capacitive and inductive. FEATURES M4 screw connections with clamps make this easier Clamping the connecting wires. Housing use matiral match UL94V-0 standard All fastenings suitable for shaking and shock resistance. Accept special customization requirements
DCEM energy meter is an advanced solution for multi-channel DC system. It can visually display voltage, current, power data and energy cumulative data. With a panel keypad, it can set voltage display parameters and the DC shunt parameters. With RS485 communication interface, DCEM can be connected to the monitoring center. It is a high-performance automatic meter suitable for UPS system detect, Solar energy plant monitor, industrial and mining enterprises, civil construction, building automation etc. Features ·External Hall sensors for isolation current input, higher safety security ·Max 4 channels energy detect & display. ·Multi-use LCD screen for volt / amp / energy data. ·Built-in isolation circuitry can measure the maximum 1KV voltage signal. ·Provide 4 channels DI port, 2 channel DO for control. ·Provide RS485 port for remote communication.
New 194J series Smart Power Manager is the more powerful meter than 194Y series power analyzer. With higher precision and more measurement parameters. This meter is the latest series meter developed in 2015 by Blue Jay tech. It is the ideal choice for monitoring and controlling of power distribution systems. Application ·Provide remote fire alarm. ·Temperature data reading. ·Harmonic analyze. ·Remote data reading. ·Alarm station with voltage-free digital inputs. Features ·Class 0.2 power and energy ·Current measuring .../5 or .../1 A ·Backlit LCD display ·Expandable input / output modules (up to 3 modules) ·With RS-485 Modbus/RTU Communications ·Measured varies of power parameter. (Max demand/unbanlance/crest factor/K factor...) ·Optional 2 channel Digital Input (DI) and 3 channel Digital Output (DO) ·Record and read multi- tariffs ratio, Up to 3 months ·Provide max 50 lists SOE record function ·ITF Technology: galvanic insulation protection inputs outputs ·Universal series power supply (85-265VAC/DC)
Three phase electrical network power quality detection device, provide energy consumption and generate; THD (Total Harmonic Distortion); Harmonic individual data reading. Build-in 4 tariffs energy logger function, with onboard memory can record last three month energy data, free to set max 12 segment record period, can be use as a commercial billing unit. Application ·Applied to the control of general switch boards and low, medium and high voltage connection points. ·Harmonic analyze. ·Remote data reading. ·Alarm station with voltage-free digital inputs. Features ·Class 0.5S power and energy ·Current measuring .../5 or .../1 A ·Backlit LCD display ·Expandable input / output modules (up to 3 modules) ·With RJ45 Ethernet port support Modbus-TCP Communications ·With 2 channel Pulse Output (PO) for active energy&reactive energy counting ·Optional 1 channel Analog Output (AO) ·Optional 4 channel Digital Input (DI) and 2 channel Digital Output (DO) ·Record and read multi- tariffs ratio, Up to 3 months ·ITF Technology: galvanic insulation protection inputs outputs ·Universal series power supply (85-265VAC/DC)
BJ-192/193 series especially developed for indication and supervision of the three-phase circuit, replaces an analogical display meter, reducing installation manpower and optimizing the used one of spaces in the panel. Ideal for protection of single phase and three-phase networks, it is monitored and generally to own alarm superior and inferior. Protection of the parameters of programming by password. Title goes here. ·Class 0.5(192 series)/0.5S(193 series) electrical parameter measurement ·Current measuring .../5 or .../1 A ·Measurement function cover: Current, Voltage, total three-phase power, power factor, frequency ·RJ45 Ethernet MODBUS-TCP Communications ·Expandable input / output modules (1 modules) ·ITF Technology: galvanic insulation protection inputs outputs ·Large character LED Screen display ·Optional various install sizes
