Specification: (1).Standard voltagedc 4.8v/6.0v (2).Pwm input range:pulse cycle 20+1ms, positive pulse 12ms (3).Speed0.1s/60¿ (4).Torque:p1.7kg/cm(vcc=4.8v) (5).Max corner150¿ (6).Operation temperature: -20-75 (7).Weight:9g (8).Dimensions:22.8*11.6*21.0mm (9).Color:blue Plastic package or color box
Product description features: 1) blue plastic crust 2) pom gear 3) applications: micro planes, hand launch gliders, small electrics helicopters Specifications: 1) supply voltage: 4.8~6.0v 2) speed: 0.12sec/60o (no load running) 3) torque: 0.4kg. Cm 4) operating current: 100ma 5) static current: 1ma 6) dead band drain: 10uses 7) connector wire length: 165mm 8) dimensions (l * w * h): 20.0 * 17.6 * 8.0mm 9) weight: 3.7g(less connector) 10) connector: jr and jst plug Plastic package or color box
Product description features: 1). Blue plastic crust 2). Pom gear 3). Applications: micro planes, hand launch gliders, small electrics helicopters Specifications: 1). Supply voltage: 4.8~6.0v 2). Speed: 0.12sec/60o (no load running) 3). Torque: 0.6kg. Cm 4). Operating current: 100ma 5). Static current: 1ma 6). Dead band drain: 10uses 7). Connector wire length: 165mm 8). Dimensions (l * w * h): 20.0 * 19.6 * 8.0mm 9). Weight: 4.4g(less connector) 10). Connector: JR and jst plug Plastic package or color box
Based on the development strategy of 'adopting high technology, and exploring the global market', huali has built three production bases as well as three major markets plate. With many years of researches in our R&D centers and joint REPM electrical engineering technology research center and science projects with universities.
Hm2 series three-phase induction motors was introduced as an updated design, basically in conformity with iec standard, but also combining the design of y series, y2 series of china.Hm2 series motors with good function of enery saving can reach the limit the value of energy efficiency standards of small and medium-sized three-phase induction motor in china and eu-cemep eff2. Designs have applied for national patent. Patent number: zl2004 3 0046836.2. Hm2 series motors with the mounting dimension in accordance with standard iec60034, is identical to the mounting dimension of y series, y2 series. It has good features like optimum structure unique appearance low noise high protection class as well as high insulation class hm2 series motors can be widely used in various kinds of general use machineries like fans, pumps, machine tools, compressors, transportation machine and so on .And can also be used in the hazardous areas with oil and chemical, steel plants , mining industry, hm2 series motors are y series y2 series ideal substitution products. Output: 0.37- 355kw Model no.: hm2 series Product origin: China Brand name: huali Price terms: FOB, CFR, CIF Payment terms: t/t, l/c Supply ability: 20000 sets/month Minimum order: 10sets Delivery lead time: 45 days
Superseding the old generation of series yb, series yb2 flameproof three phase induction motors, the frame sizes are from 80-355, the basic series of flameproof motors are developed and manufactured by our company. This series motors are of remarkable features, such as light weight, compact construction, attractive appearance, safe and reliable operation, long operation life, excellent performance and easy maintenance. Little vibration, low noise
Model no.: YKK series Product origin: China Brand name: Huali Price terms: fob, CFR, CIF Payment terms: T/T, L/C Supply ability: 100 sets/month Minimum order: 2 sets Delivery lead time: 45 days
Features: Step angel ( íp) : 1.8 Motor length l(mm): 99/150/201 Rate voltage (v): 4.95~5.44 Rate current (a): 5.5~8 Phase resistance ( ª+ ): 0.67~0.9 Phase inductance (mh): 12~15 Holding torque (n.M): 11.2~28 Lead wire (no.): 4 Rotor inertia (g. C¬o): 5.5~16.2 Motor weight (kg): 5~11.7
Features: Model: 42BLF01ú+42BLF02ú+42BLF03 Number of Poles: 8 Number of Phases: 3 Nominal Voltage VDC: 24 Rated speed RPM: 4000 Continuous Torque N-m: 0.063~0.188 Output Power Watts: 26~78 Peak Torque1 N-m: 0.18~0.6 Peak Current Amps: 4.6~14.1 Line to line Resistance Ohms: 0.6~1.8 Line to line Inductance mH: 0.18~0.54 Torque constant N-m/Amps: 0.042~0.044 Back EMF V/kRPM: 4.4~4.65 Rotor inertia g•cm2:: 24~72 Body Length(L) mm: 47~79 Mass kg: 0.33~0.63
SD-2H086MB Features Low cost and good high-speed torque 14 selectable resolutions Supply voltage up to +80VDC Suitable for-2-phase and 4-phase motors Output current up to 5.86A Dip switch current setting 8different values Optically isolated input signals Pulse frequency up to 200KHz Automatic idle-current reduction Small size (107*97*48),Weight:1KG
SD-2H044MA Features Low cost and good high-speed torque Supply voltage up to +45VDC Output current up to 5.86A Optically isolated input signals Automatic idle-current reduction 14 selectable resolutions Suitable for-2-phase and 4-phase motors Dip switch current setting 8 different values Pulse frequency up to 200KHz Dip switch current setting 8 different values Small size (122.2*90*33),Weight:0.3KG
Q2HB88M Features (1) High performance, low price (2) Two group 32 channels constant angel and constant torque subdivision. Highest subdivision: 480 (3) The motor phase current is reduced to set current value 100 ms after receiving the last pulse edge (4) Bipolar constant current chopping circuit (5) Opto-isolated input/output (6) Driven current is adjustable continuously from 0.5A/phase to 8A/phase (0.4A/phase to 6.4A/phase) (7) Single power supply, voltage arrange from DC24/V to 80V (DC40V to130V) (8) Highest response frequency: 200Kpps (9) Over voltage protection, overheat protection, over current protection
Diameter: 55mm Power: 15/25W Speed: 1500~5000rpm with gear reduction ratio of 3, 3. 6, 5, 6, 7. 5, 10, 15, 18, 20, 25, 30, 36, 40, 50, 60, 75, 90, 100, 120, 150, 180 Voltage: 12/24/45/90 VDC Application: Massager, scrolling motion display systems, office automation equipments, spectacles equipments, auto-banking machinery(currecy/coin counter/sorter/binder/striper), massage chair, automatic office equipment and other industrial applications. Other features: 1, high efficiency, dependability, reliability 2, Low cost 3, CE & UL approval 4, timely delivery Linux believes the key to a successful business relationship is their commitment to fully understanding the customer's product and the operating environment in which it must function. This is achieved by working closely with both the customer's engineering and manufacturing groups. This is what sets Linux apart from many of its competitors and explains Line's explosive growth and becoming of China micro-motor No. 1 brand in the past 6 years.
Tubular motor and shutter manual accessories for roller shutter, windows, doors. Tubular motors , shutter manual accessories Specification: vtn4535-17 torque: 35nm speed: 17r. P. M vol. /freq.: 230v/50hz power: 270w max. Load under 60mm dia. Tube: 70.0kg max. Rotation(turn)of crown: 23
Hybrid stepping motor Item specifications Step angle 1.2 or 0.6 Step angle accuracy 5% (full step, no load) Resistance accuracy 10% Inductance accuracy 20% Temperature rise 80c max.(rated current, 2 phase on) Ambient temperature -20c~+50c Insulation resistance 100m ¬+ min. , 500vdc Dielectric strength 500vac for one minute Shaft radial play 0.02max. (450 g-load) Shaft axial play 0.08max. (450 g-load) Max. Radial force 220n ( 20mm from the flange ) Max. Axial force 60n Insulation class b
Step Angle 1.8fp or 0.9fp Step Angle Accuracy f+5% (full step, no load) Resistance Accuracy f+10% Inductance Accuracy f+20% Temperature Rise 80fpC Max.(rated current,2 phase on) Ambient Temperature -20fpC~+50fpC Insulation Resistance 100M ¬+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Max. radial force 220N ( 20mm from the flange ) Max. axial force 60N Insulation Class B
230wolt; 180 watt; 750 m3/h; 0, 80 amper; 4/400 cond; Packing 4 pieces
Steel and aluminum body centrifugal fans are available with external rotor motor.
Housing made of electrostatic powder coated steel and the backward curved fan is made of galvanized steel with dynamically and statically balanced. Included mounting brackets as standad product. 230V-50Hz Ip 44 Class E. Individual boxed.
Air extraction in industrial stocking premises and large premises. Coupled with external rotor motor with waterproof lubricated for-life bearings (no maintenance) from size 225 mm up to 450mm. 4 pole, single phase 230v, 50 hz/ ip54 class-f. Frame made of electrostatic powder coated steel and the impeller is made of galvanized steel. Forward curved fan is dynamically and statically balanced. (g6-3) Individual boxed.
