Features:
Model: 42BLF01ú+42BLF02ú+42BLF03
Number of Poles: 8
Number of Phases: 3
Nominal Voltage VDC: 24
Rated speed RPM: 4000
Continuous Torque N-m: 0.063~0.188
Output Power Watts: 26~78
Peak Torque1 N-m: 0.18~0.6
Peak Current Amps: 4.6~14.1
Line to line Resistance Ohms: 0.6~1.8
Line to line Inductance mH: 0.18~0.54
Torque constant N-m/Amps: 0.042~0.044
Back EMF V/kRPM: 4.4~4.65
Rotor inertia g•cm2:: 24~72
Body Length(L) mm: 47~79
Mass kg: 0.33~0.63
Rated voltages: 6-24V Motor mode: 2832 BLDC motor Customized data requirements are welcome Primary competitive advantages: brand-name parts Negotiable MOQ Custom speed and torque
Specific parameters can be viewed in the attachment, all products can be customized
Overview: MMT-KYDBL4830-2E is a kind of intelligent dual channal brushless dc motor controller.This controller can controller two BLDC motor at the same time.The use of high-performance 32-bit MCU controller, adopts the advanced control algorithms, Senior sports processing algorithm was adopted to realize the internal electronic differential function.Controller using motor internal hole signal as the rotor position feedback, coordinate external incremental encoder (1000-2500PPR) signal control motor movement, speed open-loop and closed-loop mode, location mode, torque mode.Two way independent drive chip, two way encoder processing chip, two lines of hall signal processing chip.At the same time has a variety of fault alarm function.Working mode is divided into two;Independent model and hybrid model.
High efficiency Very low vibration and noise High stability and reliability Long service life
Features: Model: 86blf01; 86blf02; 86blf03; 86blf04 Number of poles: 8 Number of phases: 3 Nominal voltage vdc: 48 Rated speed rpm: 3000 Continuous torque n-m: 0.35~1.4 Output power watts: 110~440 Peak torque1 n-m: 1.05~4.2 Peak current amps: 10.8~38.0 Line to line resistance ohms: 0.47~3.2 Line to line inductance mh: 0.71~2.1 Torque constant n-m/amps: 0.11~0.115 Back emf v/krpm: 11.5~12.0 Rotor inertia gòcm2: 350~1250 Body length (l) mm: 57~94 Mass kg: 1.1~2.75
DC brushless motor Voltage : 24 V DC Speed: 2500 rpm Rated current: 0.35 A Rated Torque: 200 gf.cm Rated power: 5.0 w Diameter : 37mm Length : 35 mm 50X15X15CM / 90PCS, 13KGS.
Dc brushless motor Professional manufacture to develop and produce brushless motor and axial fan. It has strong technique developing ability and manufacture capacity. Its products have applied in various kinds of family electrical appliances, power tool, electrically operated toy, water pump, steam pump, health care products, vacuum cleaner, and automobile fine handicraft and so on.
80W Brushless Direct Current Blower Motor Driver with High quality, sin wave FOC control, energy efficiency, low noise with all-round protection as: Over-voltage, Over current, Limit current, phase loss, anti-reverse, anti-lock, etc. Performance data: Control way: Sin wave control, FOC Hall sensor: Senseless RPM: 0-5000 Speed control: RF/PWM/VSP/SPI Speed feedback: Yes Forward/Reverse function: Yes Can be with LED light: Yes Rated spec.: Input voltage: 220V/100V Power:80W Protection data: Current limit protection: 0.8A Over current protection:1.5A Phase loss: Yes Anti-reverse: Yes Anti-lock: Yes
Specification: Rated Power:500/1200W Size: 10inch Rated Current:1.0A Rated Voltage:48/60V Rated Speed:520¡¨¤10/620¡¨¤10rpm Material:Aluminium alloy Class Of Insulation:B Coil Material:Copper Wire The Power Properties:DC Structure And Installation Method:IMB Carton and Pallet
