Ac servo driver amplifier includes DA98A-10 DA98A-12 DA98A-13 DA98A-15 DA98A-20 DA98A-23 DA98A-25 DA98A-30 DA98A-30* DA98A-50 DA98B-10 DA98B-12 DA98B-13 DA98B-15 DA98B-20 DA98B-23 DA98B-25 DA98B-30 DA98B-30* DA98B-50 DA98D-10 DA98D-12 DA98D-13 DA98D-15 DA98D-20 DA98D-23 DA98D-25 DA98D-30 DA98D-30* DA98D-50 GS2030T GS2045T GS2050T GS2075T GS2100T GS2030T-NP1 GS2045T-NP1 GS2050T-NP1 GS2075T-NP1 GS2100T-NP1 GS2198T-NP1 GS2030T-LA1 GS2045T-LA1 GS2050T-LA1 GS2075T-LA1 GS2100T-LA1 GS2198T-LA1 GR2030T-LA1 GR2045T-LA1 GR2050T-LA1 GR2075T-LA1 GR2100T-LA1 GR2198T-LA1 GE2030T-LA1 GE2045T-LA1 GE2050T-LA1 GE2075T-LA1 GE2100T-LA1 GE2198T-LA1
The Apalis TK1 is a small form-factor System on Module (SoM) based on the powerful NVIDIA Tegra K1 SoC. Ideal for building high-end embedded products in the areas of vision and computing. NVIDIA Tegra K1 ARM Cortex?¢-A15 Up to 2.2 GHz, Quad Core 2GB DDR3L (64 Bit) 16GB eMMC (8 Bit) -25° to 85° C Temp
The Colibri iMX7S and Colibri iMX7D are SODIMM sized System on Module that are based on NXP/Freescale i.MX 7Solo and i.MX 7Dual SoCs respectively. Ideal for building connected devices with high performance and frugal power consumption, along with advanced security features.
Colibri iMX6ULL is the first Toradex's Computer Module offering on-board Wi-Fi and Bluetooth. The Colibri iMX6ULL is a SODIMM-sized SoM based on NXP i.MX 6ULL application processor, featuring a power-efficient Arm® Cortex-A7 core.
Mfrs. of Led Driver, Led Controller, SMPS Power Supplies for CCTV Camera / Security Systems, SwitchingPower Supplies, Battery Charger, DC/DC Converter, Transformer, Medical Power Supply, Switching Adaptors, Solar Products, Lithium Ion Charger, , Car Inverter, UPS & Inverter, Cvt. Best regards,
Items ac dc 40v 5000a three phase switching hard chrome plating rectifier AC input voltage Three phase 220V, 380V, 415V, 480V±10%, 50/60Hz Output voltage DC 0-12/24/36/48V...300V adjustable Output current DC 0-100/200/300/400/500A/1000A....30000A adjustable Regulation range 0-100% Power factor â?¥0.9(full load) Accuracy of output current, voltage â?¤0.1% Efficiency â?¥90%(full load) Protection grade IP54 for water cooling, IP30 for forced air cooling Cooling method Water cooling or forced air cooling Control mode CC,CV,PWM Pulse control Operation mode Local touch screen, front pannel, remote control box or communication Communication protocol RSMonitor485, Profibus DP, MODBUS Working method Long time full load continuous operation Protections Overheat, input over/under voltage, output overvoltage, output overcurrent, over water temperature, under water pressure
Shindengen Bridge Diodes Shindengen General Rectifying Diodes Shindengen Schottky Barrier Diodes A&S provides all types of Shindengen Rectifiers. Models we offer: Shindengen Rectifier SHxx1, Shindengen Rectifier FH020AA, Shindengen Rectifier SH775, Shindengen Rectifier SH751, Shindengen 3-Phase Regulator Rectifier SHxx2 Series,etc. If failed to find your ideal models, pls send details to our email box. You'll be responded within one working day. We still distribute original thyristors/rectifiers of world's leading brands. ABB Thyristor, ABB Rectifier GE Thyristor, GE Rectifier AEG Thyristor, Infineon Thyriostor IR Thyristor, IR Rectifier IXYS Thyristor, NXP Thyristor Mitsubishi Thyristor, Mitsubishi Rectifier PRX Thyritor, Renesas Thyristor Westcode Thyristor, ST Thyristor SEMIKRON Thyristor, SEMIKRON Rectifier SanRex Thyrisotr, SanRex Rectifier Toshiaba Thyristor, Tyco Rectifier Vishay Thyristor, Vishay Rectifier Emerson Rectifier, Valere Rectifer Eaton Rectifer, Benning Rectifier Eltek Rectifier, BOSCH Rectifier Littelfuse Thyristor,Alpha Rectifier JieJie Microelectronics,Eupec Thtristor Westinghouse Thyristor, Westinghouse Rectifier POSEICO Thyristor, CLION Thyristor.etc.
PCT200Ai is the current transformer test set can finish various tests of different transformers. Compared with PCT200i,its accuracy is higher.This CT analyzer can test the 0.2s class CT.Only this CT analyzer - the high-accuracy current transformer test set has passed the tests held by Wuhan High Voltage Research Institute.The max permissible error of ratio measurement is �0.05% and max phase measurement is �2min. Features Can test M/P/TP type CTand PT Ratio check up to 35000:1 and 45000:5 Knee point check up to 45000 V Standards: IEC 60044-1, IEC 60044-6, IEC 61869-2, ANSI/IEEE C 57.13 Result saved directly in Excel format Report can be transferred to flash disk via USB port. Weight : 14kg
PW336i(6*15A,4*150V)is a powerful secondary injection relay tester with 6-currents and 4-voltages sources.This advanced relay testing set is capable of testing differential relay easily without changing cable connection.Optional upgrade is available to support the test of IEC61850 relay. Features 6*15A, 4*150V Aux DC (0-300V), DC measuring inputs 8 binary inputs, 4 binary outputs Adjustable threshold (0-400V) for binary inputs In-built analog monitoring and recording function Can be upgraded to support the test of IEC61850 complied relay
PCT200i is specially designed for current transformer characteristic test. PCT200i owns more test items and higher technical parameters.This CT analyzer can finish the measurement class CT and TYP class CT.The additional functions include ratio and angle differential tests (the measurement points in the GB standard),FS and inductance,steady-state parameters,peak error and transient parameters,etc. Features Test CT according to IEC60044-1/6, IEC61869-2, C57.13 Can test all types of CT, including bushing and GIS type CT One test can get all CT parameters Fast test time for excitation test 10kV knee point test: 50s 1kV knee point test: 15s Ratio check up to 30,000:1 Knee point check up to 30,000V PT test functions are also in-built Test results can be saved to flash disk Optional Excel format report generation Large color LCD display Weight : 10kg
PAC60Cip is the portable six phase real time simulation amplifier.This current amplifier is similar to PAC60Ci but it has lower output power and less weight. PA30Bip is real time simulation amplifier with three-phase current and four-phase voltage. PA30Bip-H is digital power amplifier with three-phase current and four-phase voltage. It is similar with PA30Bip but it has higher voltage output and power output. PAV250Bip is the portable six-phase real time simulation amplifier. This voltage amplifier is similar to PAV250Bi but it has small size and less weight. PAV120Bip is the portable six-phase real time simulation amplifier. This voltage amplifier is similar to PAV120Bi but it has small size and less weight.
Phpc01 current booster is specifically designed to supply high compliance voltage even at small current range. It is suitable for testing high burden electromagnetic current relays. PGPS02 It provides GPS synchronization signal in PPS (pulse per second) or PPM (pulse per minute) for synchronized test. Trigger time can be set for end-to-end test application. PSS01 This accessory can work together with PONOVO relay testing device. PSS01 is to be used to simulate the circuit breaker operation to check the relay scheme performance. Complicated software can be avoided by using this simple accessory. PACB108 The passive optical scanning head PACB108 detects the status of an LED. That can be an optical pulse output from an energy meter, the binary status of protective relay or other similar optical source. The PGPS04 is a multi-functional time synchronization device that integrates with GPS time synchronization, IRIG-B outputs (DC-TTL / DC-RS422 / optical), IRIG-B pulse input(DC-TTL / DC-RS422 / fiber), 1PPS/1PPM pulse outputDC- TTL / DC-RS232 / fiber), timing set of whole trigger points, real-time clock auto-generating and other relevant functions.
NF802 is the new generation of digital relay test equipment with local control. This digital relay tester is equipped with 8 optical ports, and its powerful data processing capability can achieve the full functional test of the IEC61850 devices. Support GPS\ IRIG-B\ IEEE 1588 synchronization, it makes the substation internal debugging and substation to substation combine debugging available. NF802 integrated some unique functions including: the abnormal SVGOOSE simulation, virtual terminal test, the optical power testing and so on Features 8 fiber optical ports for:Receiving and sending IEC61850-9-2 format SV and GOOSE message;Receiving and sending IEE1588 message;Measuring received fiber optical power Provide flexibility to configure both SV (IEC61850-9-2) and GOOSE ports independently. Local control with quick control buttons Each port can be configured as Receive and Send at the same time or it can be configured as Receive or Send. Can check the GOOSE communication link SV, GOOSE configure message can be saved and recall repeatedly With the IEEE1588 synchronization function, deviation of the time is less than ±80ns With GPS, IRIG-B code synchronization interface.
PNS630 portable analyzer was designed for smart substation maintenance. IEC61850-8-1(Goose),IEC61850-92, IEC60044-7/8 msssage can be monitored and analyzed, digital relay test function also equipped. SMV GOOSE message numerical and status analysis were realized and dispalyed visually by its numerical analyzing function. Features 1) Support IEC 61850-9-2, IEC 60044-7/8 (FT3), GOOSE, IRIG-B and IEEE1588 standards. 2) Support SCD, ICD, CID files analysis to get sampling value, sampling channel and GOOSE signal configuration. 3) Support SCD displayed in graphics. 4) Support SMV ang GOOSE monitor, and record the abnormal messages. 5) Support IEC60044-7/8 (FT3) receving and sending. The baud rates 2.5Mbps, 5Mbps, 10Mbps is available. 6) Support IEC 61850-9-2/9-2LE receiving and sending. ASDU 1-8 is available. 7) Support message monitor and record (PCAP format) for analysis. 8) Support network load analysis. 9) Support phase check. 10) Support IRIG-B and IEEE 1588 synchronization to provide time synchronization and clock source. 11) Simulate MU to output IEC61850-9-2, IEC 60044-7/8 to test digital relays. 12) Support IED time delay and SOE test. 13) Support MU time delay test, synchronization and time test. 14) Support to output messages in different flow. 15) Support SMV in different status in maximum 10. 16) Support DC testing to test digital voltage, CT and PT�??s polarity. 17) Support dBm test within -31dbm~-14dbm at wavelength 1310nm. 18) Large LCD screen to operate. 19) Chargeable battery for continuous working 6 hours above.
Precisely and automatically complete power filter amplitude frequency and phase frequency characteristic measurement.Automatically measure power filter by parameters of reactor, capacitor and resistor.Compensate and measure capacitor group unbalanced current 0.01 mA�10 mA Features Quickly and accurately test all parameters of power filter by this single device High precision: field test accuracy can reach 5�. High efficiency: compared to the traditional testing methods it saves much time and labor force. Safe and reliable: using high-frequency low-level signal does not generate dangerous high voltage. Thus no safety issue is in the picture in the field.
Crystal Oscillators : We carry brands such ECS, Epson, Fox, Stater, Tew and many others.
Electro-mechanical Hardware : We carry brands such as Amatom, Bivar, EP Johnson, Soyhco, Zierick and many more.
Kawaguchi 360ton Tie Bar Distance 710x710mm Screw Dia 70mm
Name: CANopen RTD Remote IO Module (8RTD) Model No.: M340c The M340c CANopen RTD Remote I/O Module is an industrial class, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, provides a CANBus interface. It provides multi I/O, supports standard CANopen Protocol, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system. The M340c CANopenRTD Remote I/O module provides 8 RTD inputs, supports PT100 and PT1000 resistance sensor, compatible 2 or 3 wires, the resolution is 0.1°C, measure range -120°C ~420°C. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. The M340c CANopenRTD Remote I/O module can work at 12~36VDC with anti-reverse protection design. Main Feature: 1) Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2) Power supply 12~36VDC with over voltage and phase-reversal protection; 3) 1 CANBUS Interface, comply with CANopen specification CiA301,CiA401; 4) Group 2 Only Server (non UCMM-capable) ; 5) Support Predefined Master/Slave Connection Set; 6) Support CANopen heartbeat and shutdown messages; 7) Provide EDS file for standard CANopen master interface; 8) 8 RTD input support PT100 and PT1000 resistance sensor, compatible 2 or 3 wires, measure range -120°C ~420°C; 9) High sampling frequency and special filtering strategy to ensure reliability; 10) LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 11) Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 12) Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
High Efficiency LED Module, ,Commen LED Module
