The 3500/15 AC and DC Power Supplies are half-height modules and must be installed in designated slots on the left side of the rack. The 3500 rack can contain one or two power supplies with any combinations of AC and DC. Either supply can power a full rack.
When two power supplies are installed in a rack, the one in the lower
slot acts as the primary supply, and the other in the upper slot acts as the backup supply. If installed, the second supply is the backup for the primary one.
Removing or inserting either power supply module does not disrupt operation of the rack as long as a second power supply is installed.
The 3500/15 AC and DC Power Supplies accepts a wide range of input
voltages and converts them to voltages acceptable for use by other
3500 modules. The following power supplies are available with the 3500
Series Machinery Protection System:
Universal AC Power
High Voltage DC Power Supply
Low Voltage DC Power Supply
General Information
Product ID: 3BSE008516R1
Medium Description: AI810 Analog input Module, 8 channels
Technical Information: Supersedes 3BSE008516Z1
Product Type: I/O Module
Country of Origin: Estonia / India
Customs Tariff Number: 85389091
Length: 150 mm
Height: 150 mm
Width: 75 mm
Weight: 0.19 kg
87361 Electric Components Suppliers
Short on time? Let Electric Components sellers contact you.
LR9150 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Performance
* GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy
* High sensitivity navigation engine (PVT) tracks as low as
- GPS : -165 dBm
- GLONASS : -161 dBm
* 52 track verification chann els
* SBAS (WAAS or EGNOS,MSAS)
* Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
* Tracks up to 8 CW jammers
* Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support.
* Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
* SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode.
* Reacquisition Time : 0.1 second
* RF Metal Shield for best performance in noisy environments
Hardware and Software
* Based on the high performance features of the SiRFstarV low power single core logic.
* Adaptive micropower controller
* Only 50 to 500�¼A maintains hot start capability (core logic)
* < 10mW required for TricklePower mode
* RoHS compliant (lead-free)
* SMT pads allow fully automatic assembly processes equipment and reflow soldering
* Advanced navigation features
* Smart sensor supported by I�²C interface
* External interrupt input for context change detection
Advantages
* Built-in LNA.
* Built-in internal ROM and based on Firmware 5.5.X
* It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc.
* Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity)
* Support SiRFaware technology
* Support adaptive Micro Power Controller power management mode.
* < 10mW TricklePower, so user can leave power on all day instead of power off.
* Suitable for battery drive devices that need lower power consumption application
* Cost saving through elimination of RF and board to board digital connectors
* Flexible and cost effective hardware design for different application
MIOS system is a special design isolated signal remote I/O system, it linked a local area network designed to connect controllers to remote I/O chassis and replacement of discrete wirings by fieldbus or industrial Ethernet communication.
CES is an electro-medical technology that induces sleep, provides relaxation and puts you safely back-in-action. CES therapy is able to help reduce anxiety and promotes a relaxed state. It is DRUG-FREE, safe and proven neuroscience technology with NO SIDE EFFECTS on body. Cranial electro-stimulation (CES) therapy has impressive results in the treatment of disturbed sleep patterns.
HE HEALTH BENEFITS
-Stress Reduction
-Improved Attention
-Better Memory
-Increased immune system function
-Improved Restorative sleep quality
-Resolve jet lag
-Reconcile emotional stress
-The brain functions electrochemically and can be readily modulated by electrical intervention.
-CES impacts the electrochemical function of the brain to improve emotional and physiologic states
-The technology is designed to affect the activity of subcortical brain structures known to regulate emotions.
